激光器非线性失真对SCM光波系统的影响

对于宽带副载波复用(SCM)的光波系统,研究并设法减小光源的非线性所引起的谐波失真和交调失真,是一个重要的理论课题。本文分析激光器的P—I曲线的非线性以及谐振腔里光子和电子相互耦合所引起的固有非线性及其对复用信道的影响。     

诺氟沙星与DNA的拉曼光谱研究

报道了诺氟沙星(NFX)及诺氟沙星胶囊内容物的FT-Raman光谱和在银胶基底上的表面增强拉曼光谱(SERS),归属了各个振动;研究了诺氟沙星与DNA的相互作用的SERS,结果表明:胶囊内容物的拉曼光谱图与对照品的拉曼光谱图的特征振动峰:C-F键的伸缩振动,C=C伸缩振动,O-C-O的对称伸缩振动峰值未发生变化,发生变化主要是分子骨架振动峰,诺氟沙星胶囊的辅料对拉曼光谱无实质影响,可建立拉曼光谱法检测诺氟沙星药物的分析方法;诺氟沙星可以在没有金属离子的存在下与DNA直接作用,与DNA相互作用的主要键合模式是插入作用,NFX分子中的平面结构插入DNA的双螺旋碱基平面,为深入了解喹诺酮类抗生素的抗菌机理提供可靠依据.     

矿化剂对铝酸钙粉的结构与光谱性能的影响

研究了矿化剂对制备铝酸钙粉的结构与性能的影响.研究中以铝矾土和石灰石为原料,加入一定量的矿化剂,混合均匀,经高温煅烧制得铝酸钙粉.借助于红外光谱、X射线粉末衍射、差热-热重分析等手段对不同原料的铝酸钙粉的结构、组成及性能进行了表征和研究,并对矿化剂在合成铝酸钙中的矿化机理进行探讨.研究表明:加入矿化剂后,可在更低温度条件下煅烧制备出铝酸钙粉,有利于节能减排.红外光谱分析、XRD分析、DTA-TG分析显示:未加矿化剂煅烧时,生成的产物主要是Ca3Al10O18,CaAl2Si2O8.加入矿化剂后煅烧生成的产物主要是易浸出Al2O3的CaAl3BO7和Ca3Al10O18,而不易浸出Al2O3的CaAl2Si2O8的含量大大降低.同时显示,加入矿化剂后,原料中的方解石(CaCO3)分解更容易;CaCO3与铝矾土反应更充分;更有利于促使铝矾土中的Al-Si键断裂,将铝矾土中的Al释放出来;并可降低铝酸钙的煅烧温度.研究还显示:加入矿化剂后,可以改变原产物的晶体结构与成分,有利于降低煅烧反应温度.     

ICP等离子体鞘层附近区域发光光谱特性分析

为了独立控制鞘层附近区域离子密度和离子能最分布,采用光发射谱(OES)测量技术,对不同射频功率、放电气压和基底偏压下感应耦合等离子体鞘层附近区域辉光特性进行了研究.原子谱线和离子谱线特性分析表明,在鞘层附近区域感应耦合等离子体具有较高的离子密度和较低的电子温度.改变放电气压和射频功率,对得到的光谱特性分析表明,鞘层附近区域离子密度随射频功率的增大而线性增大,在低压下随气压的升高而增大.低激发电位原子谱线强度增加迅速,高激发电位原子谱线强度增加缓慢,而离子谱线强度增加很不明显.改变基底直流偏压,对得到的发射光谱强度变化分析表明,谱线强度随基底正偏压的增加而增大.随着基底负偏压的加入,谱线强度先减小而后增大;直流偏压为-30 V时,光谱强度最弱.快速离子和电子是引起Ar激发和电离过程的主要能量来源.     

基于物理课堂有效教学的策略浅析

根据有效教学的理念提出了课堂有效教学的基本策略、动力策略和长效策略,并结合基础物理的教学,对这些教学策略的科学掌握和运用进行了探讨.     

Induced electric fields and plasmonic interactions between a metallic nanotube and a thin metallic film

We have numerically simulated the induced electric fields and the plasmonic interactions of a metallic nanotube near a thin metallic film. Our study shows that the energies and intensities of the plasmon resonances depend strongly on the aspect ratio (the ratio of the inner to outer radius) of the nanotube as well as the separation between the center of the nanotube and the upper surface of the metallic film and the thickness of the film. The enhancement of the induced electric field of this system reaches ...     

Relative position determination of a lunar rover using high-accuracy multi-frequency same-beam VLBI

Multi-frequency same-beam VLBI means that two explorers with a small separation angle are simultaneously observed with the main beam of receiving antennas. In the same-beam VLBI, the differential phase delay between two explorers and two receiving telescopes can be obtained with a small error of several picoseconds. The differential phase delay, as the observable of the same-beam VLBI, gives the separation angular information of the two explorers in the celestial sphere. The two-dimensional relative position on the plane-of-sky can thus be precisely determined with an error of less than 1 m for a distance of 3.8×105 km far away from the earth, by using the differential phase delay obtained with the four Chinese VLBI stations. The relative position of a lunar rover on the lunar surface can be determined with an error of 10 m by using the differential phase delay data and the range data for the lander when the lunar topography near the rover and the lander can be determined with an error of 10 m.     

Research on application of MOOC in optical packet switching

An experiment on receiving and identifying multiple optical orthogonal codes （MOOC） sequence-based optical labels in an optical packet switching （OPS） network is reported. Two groups of MOOC with a code length of 23 and a code weight of 3 are used to identify the optical labels. The scheme and principle of OPS networks based on MOOC sequence-based optical labels are presented. Because optical labels contain OPS and routing information, the importance of optical label processing with multiple inconsecutive, random, and burst optical labels in an OPS network is pointed out. Considering the MOOC-based optical labels, we design a circuit consisting of a broadened network and a cascaded amplifier to receive multiple groups of low-power narrow pulses （optical labels in the MOOC-OPS network） with a period of 2 ns. The successful experimental results demonstrate that the designed scheme is feasible.     

Artificial neural network method for determining optical properties from double-integrating-spheres measurements

<正>Accurate measurement of the optical properties of biological tissue is very important for optical diagnosis and therapeutics.An artificial neural network(ANN)-based inverse reconstruction method is introduced to determine the optical properties of turbid media,which is based on the reflectance(R) and transmittance (T) of a thin sample measured by a double-integrating-spheres system.The accuracy and robustness of the method has been validated,and the results show that the root mean square errors(RMSEs) of the absorption coefficientμ_a and scattering coefficientμ'_s reconstruction are less than 0.01 cm~(-1) and 0.02 cm~(-1),respectively.The algorithm is not only very accurate in the case of a lower albedo(~0.33),but also very robust to the noise of R and T especially for theμ'_s reconstruction.     

不同前驱体溶液制备BiFeO3薄膜的晶体结构及电学性质研究

BiFeO3 是技术上广泛应用的极为重要的一类多铁性材料.本文采用sol-gel法,在ITO基底上分别采用乙酸和硝酸为溶剂制备纯相BiFeO3薄膜.XRD、电滞回线与介电性分析表明,在退火温度为600℃时,两种溶液均能制备出BiFeO3晶体,相比之下,利用乙酸制备BiFeO3比较容易,且铁电性好.