Plasma jets driven by ultraintense-laser interaction with thin foils

Experimental evidence of plasma jets ejected from the rear side of thin solid targets irradiated by ultraintense (>10(19) W cm(-2)) laser pulses is presented. The jets, detected by transverse interferometric measurements with high spatial and temporal resolutions, show collimated expansion lasting for several hundreds of picoseconds and have substantially steep density gradients at their periphery. The role played by radiation pressure of the laser in the jet formation process is highlighted analytically and by extensive two-dimensional particle-in-cell simulations.     

Copper and iron interactions with angiotensin-converting enzyme inhibitors. A study by fast-atom bombardment tandem mass spectrometry

Fast atom bombardment, combined with high-energy collision-induced tandem mass spectrometry, has been used to investigate gas-phase metal-ion interactions with captopril, enalaprilat and lisinopril, all angiotensin-converting enzyme inhibitors.Suggestions for the location of metal-binding sites are presented. For captopril, metal binding occurs most likely at both the sulphur and the nitrogen atom. For enalaprilat and lisinopril, binding preferably occurs at the amine nitrogen. Copyright 1999 John Wiley & Sons, Ltd.     

Laser-driven shock experiments on precompressed water: Implications for "icy" giant planets

Laser-driven shock compression of samples precompressed to 1 GPa produces high-pressure-temperature conditions inducing two significant changes in the optical properties of water: the onset of opacity followed by enhanced reflectivity in the initially transparent water. The onset of reflectivity at infrared wavelengths can be interpreted as a semiconductor<-->electronic conductor transition in water, and is found at pressures above approximately 130 GPa for single-shocked samples precompressed to 1 GPa. Our results indicate that conductivity in the deep interior of "icy" giant planets is greater than realized previously because of an additional contribution from electrons.     

Proton radiography of a laser-driven implosion

Protons accelerated by a picosecond laser pulse have been used to radiograph a 500 microm diameter capsule, imploded with 300 J of laser light in 6 symmetrically incident beams of wavelength 1.054 microm and pulse length 1 ns. Point projection proton backlighting was used to characterize the density gradients at discrete times through the implosion. Asymmetries were diagnosed both during the early and stagnation stages of the implosion. Comparison with analytic scattering theory and simple Monte Carlo simulations were consistent with a 3+/-1 g/cm3 core with diameter 85+/-10 microm. Scaling simulations show that protons>50 MeV are required to diagnose asymmetry in ignition scale conditions.     

Preparation of Microporous ORMOSILs by Thermal Degradation of Organically Modified Siloxane Resin

Silicon containing materials have traditionally been used in microelectronic fabrication. Semi-conductor devices often have one or more arrays of patterned interconnect levels that serve to electrically couple the individual circuit elements forming an integrated circuit. These interconnect levels are typically separated by an insulating or dielectric film. Previously, a silicon oxide film was the most commonly used material for such dielectric films having dielectric constants (k) near 4.0. However, as the feature size is continuously scaling down, the relatively high k of such silicon oxide films became inadequate to provide efficient electrical insulation. As such, there has been an increasing market demand for materials with even lower dielectric constant for Interlayer Dielectric (ILD) applications, yet retaining thermal and mechanical integrity. We wish to report here our investigations on the preparation of ultra-low k ILD materials using a sacrificial approach whereby organic groups are burnt out to generate low k porous ORMOSIL films. We have been able to prepare a variety of organically modified silicone resins leading to highly microporous thin films, exhibiting ultra-low k from 1.80 to 2.87, and good to high modulus, 1.5 to 5.5 GPa. Structure property influences on porosity, dielectric constant and modulus will be discussed.     

Polysiloxane-Modified Mesoporous Materials

We report the preparation of polysiloxane-modified mesoporous silica gels derived from the acid catalysed hydrolysis of tetraethoxysilane (TEOS) and oligomeric silanol terminated polydimethylsiloxane (PDMS) in the presence of the non-ionic surfactant, octaethylene glycol monohexadecyl ether. The gels were characterised using thermal gravimetric analysis (TGA), infra-red (IR) spectroscopy, X-ray diffraction (XRD) and ²⁹Si solid state cross-polarisation (CP) magic-angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy. TGA and IR spectroscopy showed the loss of surfactant after calcination and a decrease in the Si–OH band at 950 cm^–1 indicated further condensation had occurred. This was confirmed by the increase in Q⁴ at –110 ppm, in ²⁹Si MAS NMR spectroscopy, which also showed that calcination had led to the redistribution of PDMS forming a T species. XRD data showed ordering within the structure, with an initial d-spacing of 45 Å, decreasing to 35 Å after calcination.     

Poly(aryl ether)s containing o‐terphenyl subunits. II. Random poly(ether sulfone)s

The synthesis of a new A₂X‐type difluoride monomer, N‐2‐pyridyl‐4′,4″‐bis‐(4‐fluorobenzenesulfonyl)‐o‐terphenyl‐3,6‐dimethyl‐4,5‐dicarboxylic imide ( 3 ), is described. The monomer 3 was incorporated into a series of copoly(aryl ether sulfone)s by polymerization of 4,4′‐isopropylidenediphenol and 4,4′‐difluorophenylsulfone. The incorporation of monomer 3 had an observable effect on both the glass‐transition temperature of poly(aryl ether sulfone)s and the tendency for macrocyclic oligomers to form during polymerization. Replacement of the pyridyl imide group via a transimidization reaction with propargyl amine proceeded quantitatively and without polymer degradation. The acetylene containing copoly(aryl ether sulfone) could be crosslinked by simple thermal treatment, resulting in an increase in the glass‐transition temperature and solvent resistance. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 9–17, 2000     

Multi-MeV proton source investigations in ultraintense laser-foil interactions

A study of the properties of multi-MeV proton emission from thin foils following ultraintense laser irradiation has been carried out. It has been shown that the protons are emitted, in a quasilaminar fashion, from a region of transverse size of the order of 100-200 microm. The imaging properties of the proton source are equivalent to those of a much smaller source located several hundred microm in front of the foil. This finding has been obtained by analyzing proton radiographs of periodically structured test objects, and is corroborated by observations of proton emission from laser-heated thick targets.