Single electron transfer–degenerative chain transfer living radical polymerization of N‐butyl acrylate catalyzed by Na2S2O4 in water media

Living radical polymerization of n‐butyl acrylate was achieved by single electron transfer/degenerative‐chain transfer mediated living radical polymerization in water catalyzed by sodium dithionate. The plots of number–average molecular weight versus conversion and ln[M]₀/[M] versus time are linear, indicating a controlled polymerization. This methodology leads to the preparation of α,ω‐di(iodo) poly (butyl acrylate) (α,ω‐di(iodo)PBA) macroinitiators. The influence of polymerization degree ([monomer]/[initiator]), amount of catalyst, concentration of suspending agents and temperature were studied. The molecular weight distributions were determined using a combination of three detectors (TriSEC): right‐angle light scattering (RALLS), a differential viscometer (DV), and refractive index (RI). The methodology studied in this work represents a possible route to prepare well‐tailored macromolecules made of butyl acrylate in an environmental friendly reaction medium. Moreover, such materials can be subsequently functionalized leading to the formation of different block copolymers of composition ABA. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2809–2825, 2006     

Polymer electrolyte membranes for the direct methanol fuel cell: A review

The direct methanol fuel cell (DMFC) has the potential to replace lithium‐ion rechargeable batteries in portable electronic devices, but currently experiences significant power density and efficiency losses due to high methanol crossover through polymer electrolyte membranes (PEMs). Numerous publications document the synthesis and characterization of new PEMs for the DMFC. This article reviews this research, transport phenomena in PEMs, and experimental techniques used to evaluate new PEMs for the DMFC. Although many PEMs do not show significant improvements over Nafion®, the benchmark PEM in DMFCs, experimental results show that several new PEMs exhibit lower methanol crossover at similar proton conductivities and/or higher DMFC power densities. These results and recommendations for future research are discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Parts B: Polym Phys 44: 2201–2225, 2006     

Probing the use of small‐angle light scattering for characterizing structure of titanium dioxide/low‐density polyethylene nanocomposites

Small‐angle light scattering (SALS) measurements were used to study the structure of titanium dioxide (TiO₂)/low‐density polyethylene (LDPE) nanocomposites. The results showed that the scattering from LDPE crystalline structures and the scattering from TiO₂ nanoparticles can be resolved and separated. It is shown that the independent effects of crystallization conditions and the presence of nanoparticle aggregates on the spherulitic structure of the LDPE matrix can be determined by analyzing the scattering patterns using the methods proposed. From the SALS results, we conclude that the nanoparticle surface chemistry affects both nucleation of spherulites and their structure particularly under rapid cooling conditions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1084–1095, 2006     

Acrylic acid level and adhesive performance and peel master‐curves of acrylic pressure‐sensitive adhesives

Three series of pressure‐sensitive adhesives were prepared with constant glass‐transition temperature, using emulsion polymerization. The monomers chosen were butyl acrylate, 2‐ethylhexyl acrylate (EHA), methyl methacrylate (MMA), and acrylic acid (AA). Within each polymer series, the proportion of AA monomer was held constant for each polymer preparation but acrylic ester monomer levels were varied. Adhesion performance was assessed by measurement of loop tack, static shear resistance, and through the construction of peel master‐curves. Peel master‐curves were generated through peel tests conducted over a range of temperatures and peel rates and through application of the time–temperature superposition principle. Bulk effects dominated by polymer zero shear viscosity change as AA and EHA levels were varied were attributed to the observed effect on static shear resistance and the horizontal displacements of peel master‐curves. Static shear resistance was found to strongly correlate with log(a_C), a parameter introduced to horizontally shift peel master‐curves to form a superposed, “super master‐curve”. An interfacial interaction was proposed to account for deviations observed when loop tack was correlated with log(a_C). Surface rearrangements via hydrogen bonding with the test substrate were suggested as responsible for the interfacial interaction. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1237–1252, 2006     

Rheology,morphology, and estimation of the interfacial tension of binary blends based on low‐density polyethylene/poly(trimethylene terephthalate) and high‐density polyethylene/poly(trimethylene terephthalate) [retracted article]

It has come to our attention that this article, “Rheology, Morphology, and Estimation of the Interfacial Tension of Binary Blends Based on Low‐Density Polyethylene/Poly(trimethylene terephthalate) and High‐Density Polyethylene/Poly(trimethylene terephthalate)” by A. A. Shokri and S. E. Zamani was previously published under the title, “Rheology, Morphology and Estimation of Interfacial Tension of LDPE/EVA and HDPE/EVA Blends” by H. A. Khonakdar, S. H. Jafari, A. Yavari, A. Asadinezhad, U. Wagenknecht, in Polymer Bulletin 54, 75–84 (2005), . We have retracted the article, and offer our apologies to the authors of the original paper.     

Indirect fluorometric determination of diclofenac sodium.

A simple and easy method of analysis for diclofenac sodium is reported. A spectrofluorometric method for the microdetermination of diclofenac sodium has been developed through its reaction with cerium(IV) in an acidic solution and measurement of the fluorescence of the Ce(III) ions produced. Under the optimum experimental conditions for the oxidation reaction, 1.0 M H2SO4 with 90 min of heating time (100 degrees C), the range of application is 124.3-600 ng mL(-1) and the limit of detection is 72.7 ng mL(-1). The proposed method was applied to the determination of diclofenac sodium in pharmaceutical tablets. The results of the analysis show a good agreement with those obtained by the official USP 27 HPLC method.     

Gold ultra-microelectrode arrays: application to the steady-state voltammetry of hydroxide ion in aqueous solution.

Gold ultra-microelectrode arrays are used to explore the electrochemical oxidation of hydroxide ions and are shown to be analytical useful. Two types of ultra-microelectrode arrays are used; the first consist of 256 individual electrodes of 5 microm in radius, 170 of which are electrochemically active in a cubic arrangement which are separated from their nearest neighbour by a distance of 100 microm. The second array compromises 2597 electrodes of 2.5 microm in radius and of which 1550 of which are electrochemically active in a hexagonal arrangement separated by the nearest neighbour by 55 microm. Well defined voltammetric waves are found with peak currents proportional to the concentration of hydroxide ions in the range 50 microM to 1 mM. Detection limits of 20 microM using the 170 ultra-microelectrode and 10 microM with the 1550 ultra-microelectrode array are shown to be possible but with a higher sensitivity of 4 mA M(-1) observed using the 1550 ultra-microelectrode array compared to 1.2 mA M(-1) with the 170 ultra-microelectrode array.     

Phase equilibria in the Tl-TlBr-S system

The polythermal sections TlBr-Tl₂S, TlBr-Tl₄S₃, TlBr-TlS, and Tl₆SBr₄-Tl; the isothermal section at 300 K of the phase diagram; and the projection of the liquidus surface of the Tl-S-Br system have been investigated in the composition region Tl-TlBr-S by DTA, X-ray powder diffraction analysis, and microhardness measurements. The primary crystallization regions, including that of the only ternary compound (Tl₆SBr₄), have been determined, and the types and coordinates of the invariant and univariant equilibria in the phase diagram are determined.     

Ferromagnetic material CdGeP2:Mn for spintronics

Solid solutions Cd_1?x Mn_xGeP₂ (x=0?0.19) have been synthesized and identified. In these solutions, the unit cell parameters decrease with an increase in the manganese content. The solid solution Cd_0.81Mn_0.19GeP₂ is a ferromagnet with the Curie temperature T _C ≈ 311 K. The paramagnetic moment of Mn²⁺ ions equal to 5.8 μ_B, as well as the spontaneous magnetization constituting 76% of the total magnetization of a crystal, has been determined with the use of the Langevin function. The origin of ferromagnetism in CdGeP₂:Mn is exchange mediated by charge carriers (holes). These holes are caused by cationic defects in the structure of chalcopyrite.     

Structure–activity studies on the fungitoxicity of some triorganotin(IV) compounds

Seventeen triorganotin(IV) compounds, with the general formula R₃SnX, containing symmetrical and unsymmetrical combinations of alkyl and aryl groups on tin and with a wide variation in the non-carbon-bonded anionic (X) residues, were examined along with three formally pentacoordinated adducts of triaryltin chlorides with triphenylphosphine oxide for their antifungal activity against nine plant pathogenic and saprophytic fungi. The in vitro tests included inhibitory studies on radial growth, mycelial growth, spore germination, and germ tube elongation. A significant finding was the dependence of fungitoxicity on the nature of the X group in both the tributyltin and triaryltin series, in contrast to earlier published reports on the negligible influence of the X groups on overall toxicity relative to the R group. This suggests that the X group is significantly involved in transporting the biocide to the reactive sites, and that the X group which tends to confer increased solubility to the triorganotin compound gives rise to increased activity. In studies of R group variations, tri-iso-butyltin bromide was found to be much less fungitoxic than tri-n-butyltin compounds, a result which is reconcilable in terms of increased steric encumbrance at the tin site in the former case. The steric factor is also implicated in the reduced activities observed for tris(p-tolyl)tin and tris(p-chlorophenyl)tin compounds relative to (Ph₃SnX) towards most of the fungi screened in this study. In general, it was also noted that the triaryltins were more selective in their antifungal action than the trialkyltins, which exhibited broad spectral activity when applied at the concentration level of 10 μg cm^?3.