Precision Higgs physics at the CEPC

The discovery of the Higgs boson with its mass around 125 GeV by the ATLAS and CMS Collaborations marked the beginning of a new era in high energy physics.The Higgs boson will be the subject of extensive studies of the ongoing LHC program.At the same time,lepton collider based Higgs factories have been proposed as a possible next step beyond the LHC,with its main goal to precisely measure the properties of the Higgs boson and probe potential new physics associated with the Higgs boson.The Circular Electron Positron Collider(CEPC)is one of such proposed Higgs factories.The CEPC is an e~+e~- circular collider proposed by and to be hosted in China.Located in a tunnel of approximately 100 km in circumference,it will operate at a center-of-mass energy of 240 GeV as the Higgs factory.In this paper,we present the first estimates on the precision of the Higgs boson property measurements achievable at the CEPC and discuss implications of these measurements.     

弹性光网络中基于效用的公平性感知动态频谱分配方案(英文)

针对弹性光网络中不同粒度业务之间的服务公平性问题,提出了公平性感知的动态频谱分配算法.通过引入一个新的效用函数,使得进行频谱分配时不仅考虑不同粒度业务间的服务公平性,而且还兼顾网络整体的频谱资源利用率,从而大大缓解了网络整体阻塞性能损伤.仿真结果表明,在动态网络环境下,该方案可以极大地提高弹性光网络中不同粒度业务之间的服务公平性,并且没有明显的阻塞性能恶化.     

HET-450大功率霍尔电推力器仿真分析及试验

针对大功率霍尔推力器耐受强热载荷不易稳定工作、宽放电电压范围调整难以高效电磁调控等关键难点,兰州空间技术物理研究所与哈尔滨工业大学联合开展了10 kW级以上大功率霍尔推力器技术研究,开展了热分析设计,并建立热仿真模型,计算获得关键组件稳态温度,结果显示各部位温度均满足设计要求;同步建立了PIC仿真模型,进行了80 mg/s固定流率下,不同电压下电离特性分析,结果表明推力器放电腔口径较大情况下,电压低会使工质利用率降低从而导致推力器效率低;进一步,开展性能分析,得出600 V阳极效率低于500 V时工况,分析为电离不充分和壁面能量损失所致;此外,基于实验样机开展了试验研究,实现30 kW功率下的稳定工作,表明针对性热防护设计具有较好效果,并采用激光干涉推力测量法,获得推力为1.33 N,与仿真数据所得1.38 N偏差在5%以内,具有较高的符合度,表明推力器设计合理有效。     

A Parallel Study on （BN）n and （HAlNH）n （n=11-22） Clusters： Geometry and Stability

A parallel study on （BN）n and （HAlNH）n （n = 11-22） clusters is presented herein with ab initio HF/6-31G^＊ method. Two types of structures, i.e. cage-like and needle-shaped, are constructed. The calculated results indicate that the classical cage-like geometry is energetically more favourable for （BN）n while the needle-shaped （HAlNH）n structures are more stable than their cage-like counterparts. It is suggested that the nanostructures with higher structural similarity to the corresponding bulk phases possess greater stability. This idea leads to the viable way to intercept segment from bulk materials to construct models for theoretical study of complex nanostructures.     

壳聚糖—丝心蛋白合金膜的研究（Ⅱ）：半互穿聚合物网络型膜对…

研究了壳聚糖－丝心蛋白半互穿透合物网络型膜对ｐＨ值和离子的敏感性，发现该膜在ｐＨ〈３．３时溶胀度剧烈增加；在ｐＨ＝２时，是否出现溶胀极大值与膜组分的含量及交联剂的含量有关；膜在不同ｐＨ值溶液中可交替溶胀和收缩，且这种溶胀－收缩行为重复可逆，同时，该膜在不同离子溶液中的溶胀度亦不同，在相同离子强度的溶液中，此膜在３价离了了中的溶胀度最大。     

不同交联剂含量对戊二醛交联壳聚糖膜结构与性 能影响的研究

仔细研究壳聚糖膜的结晶度、溶胀度及其对二价铜离子的吸附量与交联剂戊二醛含量(特别是在戊二醛含量较低时)的关系。结果发现膜的结晶度、溶胀度以及对铜离子的吸附量均在戊二醛摩尔分数为0.25%时达到极大值。结晶度的增大可归结于轻度交联能使壳聚糖分子链在成膜时排列更为有序;而溶胀度和对铜离子吸附量的增加则可认为是交联能使壳聚糖中原先被氢键作用所束缚的氨基获得了自由。     

A 3D Homochiral Mn(Ⅱ) Coordination Polymer Based on the Ligand 2,2?-(Ethane-1,2-diylbis(oxy)) Dicinnamic Acid

A 3D homochiral coordination polymer [Mn(edca)]n(1) was synthesized from a flexible coupled cinnamic acid ligand, 2,2?-(ethane-1,2-diylbis(oxy)) dicinnamic acid(H_2 edca) and MnCl_2×4 H_2 O under solvothermal conditions. The complex crystallizes in orthorhombic, space group P2_12_12_1 with a = 5.5785(8), b = 13.0393(18), c = 23.133(3) ?, V = 1682.7(4) ?~3, M_r = 407.27, D_c = 1.608 Mg/cm~3, F(000) = 836, Z = 4, the final R = 0.0240 and wR = 0.0590 for 2983 observed reflections(I 2σ(I)). In 1, the edca2+ anions alternately bridge the Mn(Ⅱ) cations to form one-dimensional(1 D) infinite helical chains of [Mn(edca)]n, which are further connected by the ligands generating a three-dimensional(3D) homochiral network. The photoluminescence of 1 was also investigated in solid state at ambient temperature.     

基于动物丝蛋白的人工纺丝

动物丝,特别是蜘蛛丝近年来由于其优异的综合力学性能而备受关注。但是天然动物丝的应用由于种种原因而受到各种限制,因此人们期望通过人工纺丝获得性能与天然动物丝相近的人工丝纤维。本文就采用动物丝蛋白进行人工纺丝的历史和现状,从再生蜘蛛丝蛋白、重组蜘蛛丝蛋白和再生蚕丝蛋白等方面进行综述,比较了天然动物丝和人工丝纤维的力学性能,并且探讨了人工生物模拟纺丝制备高性能人工丝纤维（超级纤维）的前景。     

Synthesis and Crystal Structure of S,S''''-Bis(8-quinolyl)-1,8-dithiaoctane

1INTRODUCTIONPreviously,wehavereportedsomeflexiblemultidentateligands,suchasO,O?bis(8-quinolyl)-1,8-dioxaoctane(ODOQ)[1],1,5-bis(8-quinolylsul-fanyl)-3-oxapentane(OESQ)and1,8-bis(8-quino-lylsulfanyl)-3,6-dioxaoctane(ODSQ)[2,3]formAgcomplexeswitheithersinglestranddouble-helicalstructuresordiscretecageskeletons.SimilarligandscontainingSatomsarelikelytoplayimportantrolesintheformationofdiscretecage-moleculesinwhichthefoldingeffectofsulfuratomsaffordsthebackboneofthespacerperpendicularto…     

高硅ZSM-5沸石填充硅橡胶膜的研究(Ⅱ)——渗透蒸发性质的影响因素

研究了沸石的处理方式、渗透蒸发体系的组成以及醇-水混合物中氢键的变化对Silicalite-I沸石填充聚二甲基硅橡胶膜渗透蒸发性质的影响.实验结果表明,沸石经水热处理以及在醇-水混合物中加入盐、酸等电解质能提高膜对醇-水混合物的分离性能.