A new ellipse fitting method of the minimum differential-mode noise in the atom interference gravimeter

Ellipse fitting is a useful tool to obtain the differential signal of two atom interference gravimeters. The quality standard of ellipse fitting should be the deviation between the true phase and the fitting phase of the interference fringe. In this paper, we present a new algorithm to fit the ellipse. The algorithm is to minimize the differential noise of two interference gravimeters and obtain a more accurate value of the gravity gradient. We have theoretically derived the expression of the differential-mode noise and implemented the ellipse fitting in the program. This new algorithm is also compared with the classical methods.     

Nonlinear modes in rotating double well potential with parity–time symmetry

We investigate the nonlinear modes in a rotating double well potential with 79T symmetry. Focus on the existence and stability of the nonlinear PT modes in this system, we found that five types of PT modes can stably exist by given certain parameter settings. The multistable area between these modes are studied numerically and the bistable and tristable areas are delimited. With different input trial wavefunctions, five types of solitary wave modes are identified. We found that the rotating of the potential can significantly affect the power flow of the fundamental harmonic mode, whose effect is absent for the other modes.     

一维光子晶体斜入射波包的带隙结构

对波包的任意傅里叶分量进行坐标变换后,利用转移矩阵法推导出波包斜入射情形下一维光子晶体的色散关系表达式,利用色散关系曲线分析得出波包斜入射的第一带隙结构,与以往平面波的第一带隙结构不同,波包的带隙宽度小于平面波的带隙宽度,并且在位置上前者带隙包含在后者内部.比较了一维光子晶体分别在波包入射与平面波入射情形下带隙位置和宽度,分析了波包中心入射角的变化以及波包的角分布范围的变化对带隙结构的影响,得到了一维光子晶体对波包斜入射的带隙结构的基本特征,确定了计算波包带隙能够近似当作平面波处理的条件.研究表明,波包的带隙结构受入射角大小和波包角分布范围的影响.入射角越小,波包入射的带隙结构越接近平面波;波包的角分布范围越小,光子晶体对波包的带隙宽度和位置越接近平面波.     

Ba(Co1/3Nb2/3)O3微波介质陶瓷预烧温度研究

采用传统固相法制备Ba(Co1/3Nb2/3)O3微波介质陶瓷。研究了预烧温度对其物相组成、显微结构、烧结性能、微波介电性能的影响。结果表明:在不同预烧温度下制备的陶瓷样品主晶相为复合钙钛矿结构的Ba3CoNb2O9,900℃、1000℃有微量Ba3Nb5O15生成。最佳预烧温度为1100℃,在1380℃烧结4 h时,εr=31.8,Q×f=60164GHz,τf=-15×10-6/℃。合适的预烧温度能有效抑制第二相的生成,提升材料致密度,促使主晶相B位有序排列,进而降低介电损耗。     

台商大陆投资及区位选择影响因素研究

以对79家台商投资企业的问卷调查所得一手数据为样本,对台商投资大陆以及投资区位选择的影响因素进行了描述性统计分析,结果显示除集聚因素、市场因素、政策因素、劳动力因素等传统影响因素外,人文因素也是影响台商投资的重要因素.进一步,研究通过建立有序响应变量的累积logit模型,验证了劳工供应、租税奖励诱因、大陆市场广阔、成长迅速、海外人才引入方便性等因素是台商投资意愿的重要影响因素.     

猪胰脏中铁钙镁铜铅锌镉锰钴镍的测定

采用硝酸－过氧化氢在自动回流消化仪中消化猪胰脏,火焰原子吸收光度法测定铁、钙、镁、铜、锌、铅、镉、锰、钴、镍的含量。,方法简便,快速,结果令人满意,并对猪胰脏食用价值进行了评价。     

气相色谱法测定仓储双基发射药二号中定剂含量

 利用气相色谱法迅速分离并准确测定仓储发射药中具有安定作用的二号中定剂(二甲基二苯脲)的含量。该法与传统的溴化法比较,具有快捷、准确、直观、重复性好等特点,可以为正确评估发射药的质量等级提供可靠数据。     

非水相酶促肽合成的研究进展

生物活性肽 ,特别是寡肽 ,在免疫调节、激素调节、酶抑制、抗菌、抗病毒等方面有很大的应用潜力[1] .另外 ,调味肽也越来越显示出其在应用上的重要性 .肽作为一种终产品或者前体物质 ,在食品和药物生产上的商业潜力非常巨大 ,从而促进了肽合成的研究和发展 .目前肽合成主要有 3种方法 :化学法、重组DNA技术、酶法 .每种方法都有其优点和缺点 .总体上来说 ,在工业上化学法仍然使用得最多 ,其热力学动力学模型已经很好地建立起来 ;重组 DNA技术 ,由于需要一个长期、昂贵的研究和发展阶段 ,而且在发酵阶段存在表达效率低和产品提取回收困难…     

亲核型和自由基型七氟异丙氧基化试剂的设计和反应

氟烷基醚官能团是有机合成中一类重要的合成单元,作为含氟官能团的一种,已在构建药物分子及材料分子等方面引起了广泛关注[1].与非氟烷基醚类官能团相比,将氟烷基醚引入到有机分子中,可以很好地提高分子的脂溶性和代谢稳定性[2].     

Effect of Fluorine Substitution on the Electrochemical Property and Structural Stability of a Lithium-Excess Cation Disordered Rock-Salt Cathode

Lithium-excess cation disordered rock-salt materials have received much attention because of their high-capacity as a candidate for cathodes for lithium-ion batteries.The ultra-high specific capacity comes from the coordinated charge compensation of both transition metal and lattice oxygen.However,the oxygen redox at high voltage usually leads to irreversible oxygen release,thereby degrading the structure stability and electrochemical performance.Lithium-excess Li_1.14Ni_{0.57+0.5 x...}