射频激励扩散型冷却层叠式板条波导千瓦CO2激光器

提出了一种射频激励扩散型冷却层叠式板条波导ＣＯ２激光器结构，利用这种结构，从电极长度为５００ｍｍ的激光器件中警告了１０２０Ｗ输出，其光电效率为１０％。     

利用一维原子链模型研究薄膜瞬态结构变化

对于晶格结构响应的仿真与实验有助于我们理解激光激发引起的动态过程.利用一维原子链模型研究了激光加热后由于温度分布不均匀性产生的热应力对晶格的影响,该模型的计算结果与使用超快X射线衍射获得的实验结果相符合.该模型为研究光激发金属以及半导体等材料的超快晶格动力学提供了理论分析基础.     

射频激励相移阵列谐振腔波导CO2激光器输出特性研究

为保持器件结构紧凑型的同时获得稳定的高功率、高光束质量激光输出,将相移光学阵列谐振腔技术用于射频激励扩散型冷却板条波导CO₂激光器．实验发现,该设计方案虽然波导结构为矩形宽波导,但是由于采用了具有相移阵列结构的全反射镜,获得的激光束输出空间分布具有阵列输出光束的基本特征．在波导截面为1mm×20mm、增益介质长度为20cm的波导结构条件下,获得了46W的激光功率输出和11.3%的电光转换效率．激光束输出的远场空间分布呈空间压缩的极锐单峰．由于该结构具有的选模特性,远场为单峰空间分布特 关键词：     

An 880-nm Laser-Diode End-Pumped Nd：YVO4 Slab Laser with a Hybrid Resonator

We present an experimental study of a continuous-wave Nd： YVO4 laser diode-pumped directly in band at 880 nm. By using a compact positive confocal unstable-stable hybrid resonator, a maximal laser output of 170 W at 1064 nm is realized. The slope efficiency and optical-to-optical efficiency are 56.7% and 51.3%, respectively. The M2 factors in the unstable direction and in the stable direction they are 1.9 and 1.3, respectively.     

Parameter study of RF excited diffusively cooled all-metal slab waveguide CO_2 laser

In this paper, we have investigated some parameters of a radio frequency (RF) excited diffusively cooled all-metal slab waveguide CO2 laser based on the modified Rigrod theory by introducing a waveguide coupling efficiency which designates the coupling between the waveguide and the resonator mirrors. The parameters of the laser small signal gain go, saturation intensity Is, and waveguide coupling efficiency ηare studied theoretically and experimentally. In the experiments, three sets of output coupling flat mirrors with the different transitivities were used, and a maximum laser power output of 150 W was obtained from a gas discharge region of 2-mm height, 20-mm width, and 386-mm length coupled with a CASE-I optical waveguide resonator.     

射频激励层叠式波导CO2激光器

提出一种射频激励层叠式波导ＣＯ２激光器技术，在两个波导空间尺寸均为１×１４．５×２００ｍｍ３、射频电源频率为９９ＭＨｚ的条件下，获得最大输出功率为７５Ｗ、最大电光转换效率为１０．８％的实验结果，并在远场得到单峰分布的一维压窄光斑     

A Kilowatt Radio-Frequency Excited Diffusively Cooled All-Metal Slab Waveguide CO2 Laser

A new type of rf excited diffusively cooled all-metal slab waveguide CO2 laser is presented, in which the waveguide channel is constructed by two copper side walls and two copper electrodes, and the discharge is confined in the slab waveguide channel in terms of the voltage division structure. From this type of structure, over 1 kW laser power is obtained with an efficieney of more than 13%.     

激光二极管端面泵浦多段复合板条激光器热效应

针对激光二极管端面泵浦的多段渐变浓度复合板条激光增益介质,提出了两种选取掺杂浓度的方法,并分别计算了多段渐变浓度复合板条增益介质的热量、温度及应力分布.结果表明,与单一掺杂浓度板条增益介质相比,采用多段渐变浓度复合增益介质可显著降低增益介质内部的温度梯度及最大热应力,从而提高了激光器整体的损伤极限泵浦功率,有利于激光器的功率升级.     

Analysis of the far spatial coherent suppressed single peak field distribution of a rectangular wave-guide laser

A theory of the far spatial coherent-suppressed single-peak field distribution of a rectangular wave-guide CO₂ laser is presented. The theoretical analysis shows that a rectangular wave-guide laser can have an output intensity distribution in far field similar to that produced from a wave-guide array laser, which is in agreement with the experimental result. A single-peak mode output is obtained within 5 metres. The experimental far-field spread angle in the bigger-Fresnel number direction is 0.63 mrad, compared to the calculated one, 0.6 mrad, and when the length of the laser resonator is changed, a double-peak or multi-peak in far-field distribution of the laser is obtained.