Hydrogen peroxide biosensor based on electrodeposition of zinc oxide nanoflowers onto carbon nanotubes film electrode

A new amperometric biosensor for hydrogen peroxide was developed based on adsorption of horseradish peroxidase at the glassy carbon electrode modified with zinc oxide nanoflowers produced by electrodeposition onto multi-walled carbon nanotubes （MWNTs） film. The morphology of the MWNTs/nano-ZnO electrode has been investigated by scanning electron microscopy （SEM）, and the electrochemical performance of the electrode has also been studied by amperometric method. The resulting electrode offered an excellent detection for hydrogen peroxide at -0.11 V with a linear response range of 9.9×10^-7 to 2.9×10^-3 mol/L with a correlation coefficient of 0.991, and response time 〈5 s. The biosensor displays rapid response and expanded linear response range, and excellent stability.     

Electrochemical oxidation behavior of hydroxypivalaldehyde in the ionic liquids

The similar electrochemical oxidation behaviors of hydroxypivalaldehyde in ionic liquids （ILs） medium, C4MIMPF6, C4MIMBF4 and CsMIMPF6, are investigated using classic electrochemical methods, respectively. Only the product, hydroxypivalic acid is detected by high performance liquid chromatography （HPLC）. It can be conferred that the electrochemical oxidation of hydroxypivalaldehyde consists of two successive one-electron irreversible reactions at glass carbon （GC） electrode and the possible reaction mechanism in the ILs is proposed firstly. The diffusion coefficients of hydroxypivalaldehyde are obtained according to the electrochemical characteristics of hydroxypivalaldehyde in C4MIMPF6, C4MIMBF4 and CsMIMPF6.     

苯酚在热氧化法制备的SnO2/Ti 电极上的电氧化研究

A SnO₂/Ti electrode prepared by thermal oxidation was used as the anode for galvanostatic electrolysis in acidic solution containing phenol, the time-dependances of phenol concentration,chemical oxygen demand in solution(COD)and instantaneous current efficiency were determined during electrolysis.The results show that with the SnO₂/Ti anode instead of Pt,the COD significantly decreases at the same charge passage, and average current efficiency of oxidation increases by three times The mechanism for phenol oxidation at two electrodes was discussed.     

不确定混沌系统的径向基函数神经网络反馈补偿控制

对不确定混沌系统控制问题, 研究了一种基于径向基函数神经网络(radial basis function neural network, RBFNN)的反馈补偿控制方法. 该方法首先用RBFNN对混沌系统的动力学特性进行学习, 然后用训练好的RBFNN模型对混沌系统进行反馈补偿控制. 该方法的特点是不需要被控混沌系统的数学模型,可以快速跟踪任意给定的参考信号. 数值仿真试验表明了该控制方法不仅具有响应速度快、控制精度高, 而且具有较强的抑制混沌系统参数摄动能力和抗干扰能力.     

K-La-Ni/Si-2催化低碳烷烃与二氧化碳重整制合成气(英文)

Ｎｉ／Ｓｉ２催化剂具有较好的低碳烷烃与二氧化碳重整制合成气的反应性能，添加Ｌａ２Ｏ３助剂和Ｋ２Ｏ助剂可提高催化剂活性和合成气收率，从而进一步改善催化剂的低碳烷烃与ＣＯ２重整制合成气的反应性能，研制的ＫＬａＮｉ／Ｓｉ２催化剂，用于天然气与ＣＯ２重整反应制合成气可达９７％的低碳烷烃转化率和９５％以上的合成气收率。     

分数维方法研究GaAs薄膜中的极化子

本文采用分数维方法, 在讨论Al_0.3Ga_0.7As衬底上GaAs薄膜的分数维基础上, 计算了GaAs薄膜中的极化子结合能和有效质量. 随着薄膜厚度的增加, 极化子结合能和质量变化单调地减小. 当薄膜厚度L_w<70 Å并且衬底厚度L_b<200 Å时, 衬底厚度的变化对薄膜中极化子的结合能和质量变化的影响比较显著, 随着衬底厚度的增加, 薄膜中极化子的结合能和质量变化逐渐变大; 当薄膜厚度L_w>70 Å或者衬底厚度L_b>200 Å时, 衬底厚度的变化对薄膜中极化子的结合能和质量变化的影响不显著. 研究结果为GaAs薄膜电子和光电子器件的研究和应用提供参考. 关键词： 分数维方法 GaAs薄膜 极化子 低维异质结构     

高斯型弱散射屏产生的像面散斑场的分布特性研究

弱散射屏产生的远场散斑由一个中央亮斑和一个分布于亮斑周围而与正态散斑类似的散斑结构, 根据弱散射屏远场的散斑图样, 人们假设弱散射屏产生的像面散斑为均匀背景与正态散斑两者相干叠加的结果, 但这种假设与实际像面散斑存在歧异, 基于上述情况, 本文利用4f高通滤波光学成像系统, 研究了高斯型弱散射屏产生的像面散斑场的统计特性, 得出只有表面均方根粗糙度与入射光波的波长相差不多时上述假设才是可行的结论. 关键词： 弱散射屏 f光学成像系统')" href="#">4f光学成像系统 像面散斑     

飞秒激光低压N2等离子体特性的实验研究

在低于一个标准大气压的条件下对飞秒激光产生的N₂等离子体光谱进行了实验研究.结果表明, 各种样品气压下的激光N₂等离子体光谱均表现为连续谱和线状谱的叠加.随着样品气压的降低, 连续谱和原子谱线的强度经历了由缓慢增强发展为缓慢降低再到迅速降低的过程, 而正一价离子谱线强度呈现逐步增强的特征.在气压低于0.3 atm (1 atm=101325 Pa)时, 出现了正二价态的离子谱线. 给出了低压N₂等离子体对于飞秒激光传输和能量吸收的物理特性, 并初步讨论了低压等离子体通道特性.这些结果有助于加深了解飞秒激光等离子体的特性和机理, 特别是给出了在实验上测量不同价态离子光谱的条件, 为今后的研究提供了有益的实验依据. 关键词： 飞秒激光 气压 等离子体光谱 激光传输