飞秒激光-固体靶相互作用中渡越辐射的测量

 为了探索超热电子的加热机制，利用光学CCD相机和OMA光学多道分析仪，分别在靶背法线方向测量了光学渡越辐射（OTR）积分成像图案和光谱。实验在100 TW掺钛蓝宝石激光器上进行，飞秒激光与铜膜靶作用后，靶表面发光信号由空间分辨装置聚焦成像并引到CCD或OMA谱仪的狭缝上。测得的积分成像图案呈圆环状，光斑形成区域直径约为225 μm，在圆环边缘附近出现局部化明亮光信号，该现象表明，超热电子在传输的过程中存在成丝效应，其分布也不均匀。光谱在300～500 nm之间出现一系列非周期锐利尖峰，在400 nm（2ω0）附近出现的尖峰应归因于v×B加热机制产生的超热电子引起的相干渡越辐射（CTR）。     

双爆炸膜内壳层光电离X射线激光实验研究

报道了Pd-NaF,Pd-Cu,Ag-NaF和Ag-Cu耦合双爆炸膜内壳层光电离X射线激光的实验方法和一些实验结果。结果表明,在本实验条件下,激光加热NaF或Cu靶产生的1keV区的光子,可以增强Pd或Ag等离子体中类-Cu离子的3d¹⁰4p-3d⁹4s²软X射线发射的强度,但不足以形成X射线激光的输出。 关键词：     

Deuterium cluster jet produced at moderate backing pressures

A deuterium cluster jet produced in the supersonic expansion into vacuum of deuterium gas at liquid nitrogen temperature and moderate backing pressures are studied by Rayleigh scattering techniques. The experimental results show that deuterium clusters can be created at moderate gas backing pressures ranging from 8 to 23 bar, and a maximum average cluster size of 350 atoms per cluster is estimated. The temporal evolution of the cluster jet generated at the backing pressure of 20 bar demonstrates a two-plateau structure. The possible mechanism responsible for this structure is discussed. The former plateau with higher average atom and cluster densities is more suitable for the general laser-cluster interaction experiments.     

利用BSO晶体的电控自聚焦效应实现的一种新型电光调制

BSO(硅酸铋)晶体除了具有热自聚焦效应外¹,还具有电控自聚焦效应²,基于电控自聚焦效应,又进一步对高斯光束经BSO晶体自聚焦后的远场光斑中心处的光强与加在晶体通光方向上的电压和入射光功率的关系进行了理论和实验研究,提出一种新的电光调制方法。理论与实验相符,进一步验证了文献1、2的结论.     

超薄靶激光质子加速实验研究

在超短超强飞秒SILEX-Ⅰ激光装置上,开展了薄膜靶激光质子加速的实验研究。实验发现激光预脉冲、靶厚度对质子加速有很大的影响。在激光强度3×1018~3×1019W/cm2条件下,采用前表面厚度为3μm铜、后表面镀4μm厚CH靶,质子的最大能量达到3.15 MeV。而对190 nm厚CH膜靶,质子的最大能量为0.54 MeV。初步研究了激光偏振对质子加速的影响,相同激光功率条件下,圆偏振激光加速产生的质子最大能量略低于P偏振打靶。这些结果与靶后鞘层加速机制相一致。     

Dependence of Crystal Quality and β Value on Synthesis Temperature in Growing Gem Diamond Crystals

High quality Ib gem diamond single crystals were synthesized in cubic anvil high-pressure apparatus （SPD- 6 × 1200） under 5.4GPa and 1230℃-1280℃. The （100） face of seed crystal was used as growth face, and Ni70Mn25Co5 alloy was used as solvent/catalyst. The dependence of crystal quality andβ value （the ratio of height to diameter of diamond crystal） on synthesis temperature was studied. When the synthesis temperature is between 1230℃ and 1280℃, theβ value of the synthetic high-quality gem diamond crystals is between 0.4 and 0.6. The results show that when theβ value is between 0.4 and O. 45, the synthetic diamonds are sheet-shape crystals; however, when theβ value is between 0.45 and 0.6, the synthetic diamonds are tower-shape crystals. In addition, when theβ value is less than 0.4, skeleton crystals will appear. When theβ value is more than 0.6, most of the synthetic diamond crystals are inferior crystals.     

Self-Injection and Acceleration of Monoenergetic Electron Beams from Laser Wakefield Accelerators in a Highly Relativistic Regime

Self-injection and acceleration of monoenergetic electron beams from laser wakefield accelerators are first investigated in the highly relativistic regime, using 100 TW class, 27 fs laser pulses. Quasi-monoenergetic multi- bunched beams with energies as high as multi-hundredMeV are observed with simultaneous measurements of side-scattering emissions that indicate the formation of self-channelfing and self-injection of electrons into a plasma wake, referred to as a ＇bubble＇. The three-dimensional particle-in-cell simulations confirmed multiple self-injection of electron bunches into the bubble and their beam acceleration with gradient of 1.5 GeV/cm.     

多介质体散射的共轭梯度解法

讨论多个介质体的电磁散射体积分方程的共轭梯度迭代求解方法,给出了介质板上方具有介质目标时的电磁散射的数值结果。     

双荧光层靶Kα线强度比诊断靶内超热电子温度北大核心CSCD

利用双荧光层复合靶产生的Kα特征线强度比诊断了靶内超热电子的温度,即通过实验测量复合靶中两种不同材料荧光层辐射出的Kα特征线强度比,结合ITS3.0程序模拟结果,对超热电子温度进行诊断。将诊断结果与实验中利用电子磁谱仪测量的超热电子温度进行了比较,二者基本一致。结果表明,选取适当的荧光层靶厚,可以利用双荧光层复合靶产生的Kα特征线强度比对靶内的超热电子温度进行诊断。