Effect of Incident Intensity on Films Growth in Pulsed Laser Deposition

Incident intensity, defined by the amount of particles deposited per pulse, is an important parameter in the film growth process of pulsed laser deposition （PLD）. Different from previous models, we investigate the irreversible and reversible growth processes by using a kinetic Monte Carlo method and find that island density and film morphology strongly depend on pulse intensity. At higher pulse intensities, lots of adatoms instantaneously diffuse on the substrate surface, and then nucleation easily occurs between the moving adatoms resulting in more smaller-size islands. In contrast, at the lower pulse intensities, nucleation event occurs preferentially between the single adatom and existing islands rather than forming new islands, and therefore the average island size becomes larger in this case. Additionally, our results show that substrate temperature plays an important role in film growth. In particular, it can determine the films shape and weaken the effect of pulse intensity on film growth at the lower temperatures by controlling the mobility rate of atoms. Our results can match the related theoretical and experimental results.     

Multiple-State Storage Capability of Stacked Chalcogenide Films （Si16Sb33Te51/Si4Sb45Te51/Si11Sb39Te50） for Phase Change Memory

The multiple-state storage capability of phase change memory （PCM） is confirmed by using stacked chalcogenide films as the storage medium. The current-voltage characteristics and the resistance-current characteristics of the PCM clearly indicate that four states can be stored in this stacked film structure. Qualitative analysis indicates that the multiple-state storage capability of this stacked film structure is due to successive crystallizations in different Si-Sb-Te layers triggered by different amplitude currents.     

X射线衍射法在泌尿系结石研究中的应用

泌尿系结石是一种世界范围的常见病、多发病。准确分析尿石的化学成分和物相,有助于了解泌尿系结石的形成机制。X射线衍射法(XRD)是进行泌尿系结石研究的最重要方法之一,用作定性分析时具有可靠性,用作定量分析时具有准确性,且检测简便迅速、灵敏度高、多组分和多晶态可一次性检测。文章综述了XRD在泌尿系结石定性和定量分析中的应用以及XRD与质子激发X射线发射光谱(PIXE)、X射线光电子能谱(XPS)和原子力显微镜(AFM)等联合分析尿石的研究进展。     

圆偏振飞秒激光脉冲与低压氙气体靶相互作用软X射线辐射实验研究

利用平场光栅谱仪,分别在2和3 kPa的低气压下,测量了脉宽35 fs的圆偏振超强超短激光脉冲与5 mm长氙气体靶相互作用产生的波长在5～60 nm范围内的离子谱线。2 kPa时最强的跃迁为XeⅧ：4d105s(2S_1/2)—4d95s5p(2P_3/2)的17.085 6 nm线,3 kPa时最强的跃迁为11.343 nm的XeⅦ 4d105s2(1S0)—4d95s25f(3P₁)跃迁。两种气压下,Xe均被电离到XeⅦ,XeⅧ,XeⅨ态。     

Numerical Study on Left-Handed Materials Made of Ferrite and Metallic Wires

Due to coupling effect, we show that it is difficult to realize the left-handed material by placing metallic wires directly into a ferrite matrix. However by introducing an insulating material round the metallic wires to decouple the direct interaction between the metallic wire and ferrite matrix, we have proposed two microstructures, which are shown by numerical simulation to have negative refractive indexes. The influence of microstructure on the transmission property is also examined.     

Deuterium cluster jet produced at moderate backing pressures

A deuterium cluster jet produced in the supersonic expansion into vacuum of deuterium gas at liquid nitrogen temperature and moderate backing pressures are studied by Rayleigh scattering techniques. The experimental results show that deuterium clusters can be created at moderate gas backing pressures ranging from 8 to 23 bar, and a maximum average cluster size of 350 atoms per cluster is estimated. The temporal evolution of the cluster jet generated at the backing pressure of 20 bar demonstrates a two-plateau structure. The possible mechanism responsible for this structure is discussed. The former plateau with higher average atom and cluster densities is more suitable for the general laser-cluster interaction experiments.     

硝基甲烷异构化反应势能面的ab initio研究

在B3LYP/ 6 311++G(2d ,2p)水平上 ,优化得到硝基甲烷CH3 NO2 的 10种异构体和 2 3个异构化反应过渡态 ,并用G2MP2方法进行了单点能计算 .根据计算得到的G2MP2相对能量 ,探讨了CH3 NO2 势能面上异构化反应的微观机理 .研究表明 ,反应初始阶段的CH3 NO2 异构化过程具有较高的能垒 ,其中CH3 NO2 的两个主要异构化反应通道 ,即CH3 NO2 →CH3 ONO和CH3 NO2 →CH2 N(O)OH的活化能分别为 2 70 .3和 2 6 7.8kJ/mol,均高于CH3 NO2的C -N键离解能 .因而 ,从动力学角度考虑 ,CH3 NO2 的异构化反应较为不利 .     

基于带电粒子活化法开展的SGⅡ-U皮秒激光质子加速实验研究

基于带电粒子活化测谱方法在SGⅡ-U装置上开展了皮秒激光靶背鞘场机制质子加速实验研究,对靶参数进行了优化.利用带电粒子活化测谱方法测量了相同激光条件、不同Cu薄膜靶厚度情况下靶背鞘场加速质子的最高截止能量、角分布、总产额以及激光能量到质子的转化效率等关键参数.实验发现,SGⅡ-U皮秒激光靶背鞘场加速机制的最佳Cu薄膜靶厚度为10 μm,对应质子最高能量接近40 MeV,质子（>4 MeV）总产额约4×10¹²个,激光能量到质子的转化效率约2%.薄膜靶更厚或者更薄都会降低加速质子的最高截止能量;当靶厚减薄至1 μm时,皮秒激光的预脉冲开始对靶背鞘场产生显著影响,质子最高截止能量急剧下降,高能质子束斑呈现空心结构;而当靶厚增加至35 μm时,虽然质子束的能量有所降低,但是质子束斑的均匀性更好.     

电感储能型脉冲形成线高重复频率脉冲功率发生器

利用传输线中的电感单元和电压叠加的方式来获得纳秒(ns)级矩形高压脉冲是一种全新的思路。描述了这种发生器的基本原理,并利用同轴电缆和MOSFET开关制作了两种原型脉冲发生器(单线型和双线型)来论证此方案的可行性,并进行了初步实验验证,在四模块叠加的情况下,分别实现了4 kV/20 A,20 ns和2 kV/40A,20 ns的短脉冲。实验结果表明,电感型脉冲形成线电压叠加器是一种有潜力的紧凑型高压脉冲发生器。     

强激光锥型靶真空电子加速数值模拟研究

真空激光加速机制具有加速场梯度大、加速电子电量高的优点,目前制约真空加速机制研究发展的主要问题是如何产生具有一定初速度的电子并将其注入加速场。提出了一种利用强激光与锥型靶相互作用产生高能电子并实现真空加速的新方法,利用二维PIC(Particle-in-cell)粒子模拟程序对这一方法进行了研究。模拟结果显示,对于光强为10²¹ W/cm²量级的高斯激光脉冲,产生了能量为GeV量级、发散角约为1°的强流快电子束。此外还通过理论解析和参数模拟研究了靶半径对这种超热电子加速机制的影响。