离心式冷水空调机组中CFC11替代工质的研究

对几种 HFCs、HFEs 类新工质和混合工质M1、M2进行了以在离心式冷水空调机组中替代 CFC11为目标的理论循环性能分析。结果表明,M1具有作为 CFC11 灌注式替代物的潜力;HFC143 循环性能优良,更适合应用于新设计的系统中。     

湿空气的比相对湿度和通用焓湿图

本文提出了比相对湿度的概念,给出了在宽广的参数范围内计算湿空气热力性质的精确公式,并在此基础上绘制了可用于不同压力的通用焓湿图,为空调、干燥等技术中各种湿空气过程的热力计算提供了方便条件。     

光测仪器的轴系检测及数据处理

本文针对光测仪器的轴系检测提出了一种新的改进方法,该方法采用数字式电子水平仪测量垂直轴系的径向晃动量;并用不等间隔采样点的最小二乘法计算垂直轴系、水平轴系的晃动误差。该方法及计算程序已成功地应用于多项任务的轴系误差测量中。     

瓶颈开口角对二维颗粒流的影响

实验研究了平面传送带上颗粒流的特性，主要包括传送带出口处开口宽度以及瓶颈开口角度对颗粒流的影响.实验结果发现，改变瓶颈开口角度θ，当θ大于15°时，颗粒流量Q随着cosθ呈线性变化.同时，颗粒流量Q与传送带速度v以及开口大小R也密切相关，而在θ小于15°时，颗粒流量Q基本不随开口角度变化.     

Isoscaling in Statistical Sequential Decay Model

A sequential decay model is used to study isoscaling, i.e. the factorization of the isotope ratios from sources of different isospins and sizes over a broad range of excitation energies, into fugacity terms of proton and neutron number, R21（N, Z） = Y2（ N, Z）/Y1（ N, Z） = Cexp（αN -βZ）. It is found that the isoscaling parameters α and β have a strong dependence on the isospin difference of equilibrated source and excitation energy, no significant influence of the source size on α andβ has been observed. It is found that α and β decrease with the excitation energy and are linear functions of 1/T and △（Z/A）2 or△（N/A）2 of the sources. Symmetry energy coefticient Gsym is constrained from the relationship of a and source △（Z/A）2, /3 and source △（N/A）2.     

Electrochemical Deposition and Properties of ZnTe Nanowire Array

Pulsed electrodeposited technique is applied to fabricate ZnTe nanowire arrays with different diameters into the anodic alumina membrane in citric acid solution. The x-ray powder diffraction, scanning electron microscopy and transmission electron microscopy indicate that the high ordered, uniform and single-crystalline nanowires have been fabricated. The optical absorption spectra of the nanowire array show that the optical absorption band edge of the ZnTe nanowire array exhibit a blue shift compared with that of bulk ZnTe, and the nonlinear current-voltage characteristic is observed.     

Flat Supercontinuum Generation at 1550 nm in a Dispersion-Flattened Microstructure Fibre Using Picosecond Pulse

The generation of a flat supercontinuum of over 80nm in the 1550nm region by injecting 1.6ps 10 GHz repetition rate optical pulses into an 80-m-long dispersion-flattened microstructure fibre is demonstrated. The fibre has small normal dispersion with a variation smaller than 1.5 （ps·nm^-1·km^-1） between 1500 and 1650nm. The generated supercontinuum ranging from 1513 to 1591 nm has the flatness of ±1.5 dB and it is not so flat in the range of several nanometres around the pump wavelength 1552nm. Numerical simulation is also used to study the effect of optical loss, fibre parameters and pumping conditions on supercontinuum generation in the dispersion-flattened microstructure fibre, and can be used for further optimization to generate flat broad spectra.     

人体足跖骨的力学分析及其临床应用

本文研制新型的人体足底负荷测定装置,确定正常步态下的正常足和病理足的负荷谱.在此基础上,进行了人体足跖骨力学模型的理论分析计算和跖骨应力的实验测定,综合分析结果在足外科和矫、整形外科临床中得到了实际应用.     

教会学生算利息

为了适应商品经济的需要，初中数学教材中安排了单利计算利息和税收的内容。