金属离子与腺嘌呤异构体复合物的稳定性

在B3LYP/6-311++G**//6-31+G*基组水平上结合PCM模型系统的优化了气相和液相环境中14种腺嘌呤异构体与四种金属离子(Na+,K+,Mg2+,Ca2+)形成的132个稳定复合物。通过能量对比,得到了所有复合物异构体在气液两相中的稳定性顺序及不同金属离子与同一异构体形成的复合物的能量排序,首次给出了液相中这些不同金属离子复合物的最稳定结构。结果发现溶剂效应导致了液相中的复合物稳定性顺序与气相中的相比发生了很大变化;同一异构体与不同金属离子形成的复合物其稳定性在排序中也变化很大。对于这些变化,本文分别从金属离子与腺嘌呤的复合物在气相中的结合能(EBE)及在液相中的溶质溶剂相互作用能(Epol)能等方面进行了系统的阐述     

基于G-SPAD的卫星激光测距回波特性

从盖革模式单光子雪崩光电二极管的光电特性出发,分析了卫星激光测距的测距精度与激光脉冲宽度及回波强度的关系,并利用长春站卫星激光测距系统对地球动力学卫星进行观测.结果表明,当回波光子数为1 000左右时,系统测距精度为10.2mm左右,当回波光子数为8 000时,测距精度减小为9.4mm左右,表明回波强度较大时,可提高卫星激光测距系统的测距精度;当激光器脉宽为200ps时,系统测距精度为17.3mm,当脉宽为50ps时,系统的测距精度为10.0mm,表明卫星激光测距系统的测距精度随着脉宽变窄得到了有效提高.为进一步验证理论结果,对Ajisai卫星进行实测,分析了高重复频率激光测距系统对系统测距精度的影响,结果表明采用窄脉宽高重复频率的激光测距系统,激光测距有效回波数和标准点密度呈数量级增加,测距精度也有一定的提高.因此,为了改善卫星激光测距系统回波特性,应选用脉宽窄、重复频率高、能量大的激光器作为基于盖革模式单光子雪崩光电二极管的卫星激光测距系统的激光光源.     

New progress on beam availability and reliability of PKU high intensity CW proton ECR ion source

The stability and reliability of an ion source and its beam availability are extremely significant for any accelerator,especially for those high current long term CW operation ones like ADS. Although the first high quality 306-hours continuous wave(CW) operating curve at 50 m A@35 ke V has been successfully obtained with a standard compact 2.45 GHz ECR ion source at Peking University(PKU), but the uncertainties that caused beam trips before are unacceptable during an accelerator real operation and should be eliminated. Meanwhile, no permission will be given when the beam power is upgraded from 50 m A@35 ke V to 50 m A@50 ke V. To improve the PKU CW proton source quality, several upgrades were done recently. After those improvements, a new long term CW proton beam experiment at 50 m A@50 ke V was carried out in June 2016. The total running time is 300.5 hours, including near 6 hours ion source preparation and 294 hours non-disturb continuous operation. Within the continuous 13 days operation, no beam-off happened, no spark was observed,no beam drop appeared, no interrupting action was needed, and only a few beam fluctuations caused by the air conditional failure occurred. Beam availability and reliability within the 294 hours is 100%. The root-mean-square(RMS) emittance of this 50 m A@50 ke V CW proton beam is about 0.186 π.mm.mrad. A careful inspection of the ion source was done after this long term operation and no obvious damage was found. The restart experimental results obtained after the ion source inspection prove the high repeatability of PKU PMECRIS. In addition, a 130-m A H+beam was obtained at 50 k V with duty factor of 10%(100 Hz/1 ms) with this source. Details will be presented in this paper.     

光学超振荡与超振荡光学器件

传统光学器件的衍射极限极大地制约了远场超分辨光学系统的进一步发展.如何从光学器件层面突破光学衍射极限瓶颈,实现非标记远场超分辨光学成像,是光学领域面临的巨大挑战.光学超振荡在不依靠倏逝波的条件下,可以在远场实现任意小的亚波长光场结构,这为突破光学衍射极限提供了一条崭新的途径.近年来,光学超振荡现象和超振荡光学器件的相关研究得到了快速发展,在理论和实验上成功地演示了超振荡光场的产生和多种超振荡光学器件,并在实验上展示了超振荡光学器件在非标记远场超分辨光学显微、成像以及超高密度数据存储等应用领域的巨大优势和应用潜力.本文对光学超振荡相关理论、超振荡光学器件设计理论和方法、超振荡光学器件发展现状、超振荡光场测试方法以及超振荡光学器件的应用等方面进行详细介绍和分析.     

残余应力分析方法比较:X射线衍射法与应力释放法

残余应力分析方法主要有衍射法、应力释放法和声、光、磁等方法。其中,X射线衍射法与应力释放中的钻孔技术与理论最为成熟,应用最广。在应力均匀且数值较小时,两者可以给出相互接近的结果。然而当样品微小且微观结构复杂时,两者给出的结果会有明显的差异。本文利用上述两种方法对同一纯铜样品表面的残余应力进行分析,对比分析结果并讨论了相关的影响因素。我们对X射线衍射法与环芯法的适用性进行了讨论:前者适用于晶体材料的无损检测,而后者更能反映当前应力水平。此外,对方法的选用需要考虑应力测试的目的。     

Controllable synthesis of high aspect ratio Mg_2B_2O_5 nanowires and their applications in reinforced polyhydroxyalkanoate composites

Highly pure magnesium borate （Mg2B2O5） nanowires with an average diameter of - 30 nm, an average length of 15 μm, and a high aspect ratio of - 500 have been synthesized on a large scale via a two-step method. MgBO2（OH） nanowires with high aspect ratios were first prepared via a PVP-assisted hydrothermal technique. Using these nanowires as precursors, single crystalline Mg2B205 nanowires were synthesized by post-annealing treatment at a relatively low temperature of 700 ℃. The important effect of the MgBO2（OH）-Mg2B2O5 conversion process on the morphology of the Mg2B2O5 nanowires was investigated and it was indicated that the recrystallization process plays an important role in the protection of the one-dimensional （1D） nanostructure. Moreover, the rigidity and the toughness of the Mg2B2O5 nanowire- reinforced PHA composites were tremendously improved compared to those of the pure PHA. Our results demonstrate the effectiveness of Mg2B2O5 nanowires for reinforcement applications in polymer composites.     

Effects of interface roughness on photoluminescence full width at half maximum in GaN/AlGaN quantum wells

Low temperature photoluminescence(PL) measurements have been performed for a set of GaN/AlxGa1-xN quantum wells(QWs). The experimental results show that the optical full width at half maximum(FWHM) increases relatively rapidly with increasing Al composition in the AlxGa1-xN barrier, and increases only slightly with increasing GaN well width. A model considering the interface roughness is used to interpret the experimental results. In the model, the FWHM’s broadening caused by the interface roughness is calculated based on the triangle potential well approximation. We find that the calculated results accord with the experimental results well.     

流动注射-化学发光法测定富马酸依美斯汀

在酸性条件下,KMnO4与甲醛能够产生微弱的化学发光,而富马酸依美斯汀的存在能够大大增强该化学发光强度;结合流动注射技术,建立了测定富马酸依美斯汀的流动注射-化学发光新方法。该方法的线性范围分别为3.0×10-8～2.0×10-7g/mL,2.0×10-7～1.0×10-6g/mL和1.0×10-6～8.0×10-6g/mL。检出限为1.0×10-8g/mL,对2.0×10-6g/mL富马酸依美斯汀滴眼液平行测定11次,其相对标准偏差为1.3%。该方法已成功应用于滴眼液中富马酸依美斯汀的含量测定。     

微重力下低温贮箱压力控制技术进展

针对微重力下低温贮箱压力升高的问题,简要介绍了几种常用的低温贮箱压力控制的方法及原理,讨论了它们各自存在的问题,并简要展望未来低温贮箱压力控制技术的发展方向。文章指出,未来研究重点在于将主动制冷与被动绝热相结合,实现零蒸发贮存的热转移技术。     

Yb3+,Er3+共掺BaGd2ZnO5材料的制备及其上转换发光效率

采用溶胶-凝胶法制备了含有不同Yb³⁺,Er³⁺掺杂浓度的BaGd₂ZnO₅上转换发光材料,测量了这些样品在不同激发光密度下的上转换光发射功率及上转换效率。实验结果表明:在不同激发光密度下,所有样品的光发射功率都存在极大值,其中Yb³⁺掺杂摩尔分数为4%,Er³⁺掺杂摩尔分数为1%时样品的最大发射光功率可达20 mW;样品的上转换绝对效率也存在极大值,随着Yb³⁺和Er³⁺浓度增加,绝对效率的极大值向较低激发光密度方向移动,在Yb³⁺掺杂摩尔分数为9%,Er³⁺掺杂摩尔分数为3%时样品的上转换效率达到最高,绝对效率为3.2%,极值效率最大值为6.9%。