基于Zigbee的高层火灾定位及语音报警系统

近年来,我国高层建筑火灾发生率呈逐年上升趋势,高层建筑防火和火灾报警的研究,显得尤为迫切和重要,其中火灾报警系统已成为必要的装置,对现代建筑起着极其重要的安全保障作用。提出了一种高层火灾定位及语音报警系统,该系统由Zigbee无线传感器网络、火灾探测器、语音单片机组成。当高层建筑发生火灾时,系统将通过火灾探测器自动判断火灾的发生,然后利用无线传感器网络在第一时间发送给各楼层终端设备,自动触发各楼层语音单片机播报火灾发生的具体楼层和逃生注意事项,可以让人们更快做出反应、选择更合理的逃生方式,为楼内人员的逃生赢得宝贵时间,由此可最大程度地保护人们的生命安全。因此,对高层防火系统的研究可大大降低居民住宅、写字楼、宾馆、饭店等高层建筑的火灾损失。     

用任意偏向角测量三棱镜折射率

本文给出用任意偏向角测量三棱镜折射率的理论公式和实验方法，并给出与最小偏向角法测量结果的比较，具有几乎一样的误差。     

荷能离子在C60薄膜中引起的辐照效应

用 Raman散射和 XPS技术分析了能量为几百 ke V到几百 Me V的多种离子在 C60 薄膜中引起的辐照效应.分析结果表明 ,在低能重离子辐照的 C60 薄膜中 ,其晶态向非晶态的转变过程是由核碰撞主导的.在快离子 (1 2 0 ke V的 H离子和171.2 Me V的 S离子 )辐照的情况下,电子能损起主导作用.发现在H离子辐照过程中,电子能损有明显的退火效应 ,致使 C60 由晶态向非晶态转变的过程中,经历了一个石墨化的中间过程;而在 S离子辐照的情况下 ,电子能损的破坏作用超过了退火效应 ,因此 ,在C₆₀ 由晶态向非晶态转变的过程中,无石墨化的中间过程.Irradiation effecs (mainly including transformation from crystalline into amorphous state) of C 60 films induced by 120 keV H, He, N, Ar, Fe and Mo ions, 240 keV and 360 keV Ar ions, and 171.2 MeV, 125.3 MeV and 75.8 MeV S ions were analysed by means of Raman scattering and XPS technique. The analysis results indicate that amorphization process in the cases of N, Ar, Fe and Mo ions irradiation is dominated by nuclear collision, but in the case of H ion irradiation, the process is...     

相互作用玻色子模型中相变特征量的玻色子数N依赖行为

研究了相互作用玻色子模型中各种对相变比较敏感的特征量相对于总玻色子数N的依赖行为. 通过比较这些特征量在U(5)-SU(3)过渡区以及U(5)-O(6)过渡区在不同N情况下的临界行为, 发现BE(2)比值B(E2;4₁→2₁)/B(E2};2₁→0₁)和B(E2;0₂→2₁)/B(E2;2₁→0₁)等可以作为完全区分一级相变和二级相变的有效序参量.     

Molecular Dynamics Simulations of Helium Behaviour in Titanium Crystals

Molecular dynamics simulations are performed to investigate the behaviour of helium atoms in titanium at a temperature of 30OK. The nucleation and growth of helium bubble has been simulated up to 50 helium atoms. The approach to simulate the bubble growth is to add helium atoms one by one to the bubble and let the system evolve. The titanium cohesion is based on the tight binding scheme derived from the embedded atom method, and the helium-titanium interaction is characterized by fitted potential in the form of a Lennard-Jones function. The pressure in small helium bubbles is approximately calculated. The simulation results show that the pressure will decrease with the increasing bubble size, while increase with the increasing helium atoms. An analytic function about the quantitative relationship of the pressure with the bubble size and number of helium atoms is also fitted.     

一种新的无催化剂条件下的2,3-喹啉二羧酸酯的合成

无催化剂条件下,利用邻氨基二苯甲酮衍生物和丁炔二酸酯作为反应原料,二甲基亚砜(DMSO)作为溶剂,高效地构建2,3-喹啉二羧酸酯类化合物.并且根据反应的结果,对可能的反应机理进行了初步的探究.     

聚变堆液态包层提氚鼓泡器的概念设计

在气-液接触法提取液态锂合金中的氢的实验基础上,提出了以气-液交换柱为核心的提氚鼓泡器(LBTB)的概念设计。LBTB 主要由气体进样纯化器、气-液交换柱系统、饱和器－解吸器和辅助系统构成。LBTB以氩氢混合气为吹洗气,其主要功能是在线监测液态包层主回路中的氚行为,并检验多柱级联后的氚回收率是否可以达到90%的期望值。     

Field—ion microscopy observation of single—walled carbon nanotubes

Field-ion microscopy(FIM),a tool for surface analysis with atomic resolution,has been employed to observe the end structure of single-walled carbon nanotubes(SWCNTs).FIM images revealed the existence of open SWCNT ends,Amorphous carbon atoms were also observed to occur around SWCNTs and traditional field evaporation failed to remove them.Heat treatment was found to be efficacious in altering the end structures of SWCNT bundles.Carbon and oxygen atoms released from heated tungsten filament are believed to be responsible for the decoration imposed on the SWCNT ends.     

圆锥曲线上两点关于直线对称相关问题探究

我们经常看到一类问题：已知圆锥曲线和一直线相交，试判断圆锥曲线上是否存在两点关于该直线对称及其相关问题．对于这类问题，学生往往处理得不够得当，为此，本文提出四种方法：向量法、参数法、判别方法及区域法，并针对上述问题进行了例举分析，愿与读者相互切磋，共同探究．     

用重离子实验数据推算质子翻转截面和轨道翻转率

空间单粒子辐射环境主要由重离子和高能质子构成,但在地面利用两种离子评估器件单粒子效应敏感度成本太高,因此利用重离子实验数据推算质子敏感参数成为一个非常活跃的研究课题.利用Barak经验公式,在重离子实验获得器件的σ LET值曲线的基础上,计算了几种典型器件在不同能量下的质子翻转截面以及典型轨道上质子引起的翻转率,并同FOM方法预示的质子翻转率进行了比较,其结果将对卫星电子系统抗辐射加固设计具有重要参考价值. The radiation environments concerned with single event upset mainly consist of heavy ions from cosmic ray and large flux proton from solar events and planetary radiation belts. The most reliable calculation for SEE rate induced by proton and henvy ions are the way to use the experimentally measured data rospectively. But it is too expensive to test devices with both heavy ions and protons. So it is necessary to derive models for predicting proton cross sections and rates from heavy ion test data....