Training Effect and Hysteretic Behaviour of Angular Dependence of Exchange Bias in Co/IrMn Bilayers

The training effect and the hysteresis behaviour of the angular dependence of exchange bias are extensively investigated upon the variation of the IrMn layer thickness tXrMn in a series of Co/IrMn bilayers. When tIrMn is very small, both of them are negligible. Then they increase very sharply with increasing tUMn and then reach maxima at almost the same value OftXrMn. Finally they both decrease when tIrMn is further increased. The similar variation trends suggest that these phenomena arise from irreversible change of antiferromagnet spin orientations, according to the thermal activation model.     

Numerical Calculation of SAW Propagation Properties at the x-Cut of Ferroelectric PMN-33%PT Single Crystals

Surface acoustic wave （SAW） properties at the x-cut of relaxor-based 0.67Pb（Mg1/3Nb2/3）O3-0.33PbTiO3 （PMN- 33%PT） ferroelectric single crystals are analyzed theoretically when poled along the [001]c cubic direction. It can be found that PMN-33%PT single crystal is a kind of material with a low phase velocity and high electromechanical coupling coefficient, and the single crystal possesses some cuts with zero power flow angle. The results are based on the material parameters at room temperature. The conclusions provide device designers with a few ideal cuts of PMN-33%PT single crystals. Moreover, choosing an optimal cut will dramatically improve the performance of SAW devices, and corresponding results for crystal systems working at other temperatures could also be figured out by employing the method.     

阳极氧化TiN薄膜制备N掺杂纳米TiO2薄膜及其可见光活性

室温下通过电泳沉积(EPD)的方法在Ti片表面制备TiN薄膜, 然后对TiN薄膜进行阳极氧化得到N掺杂多孔纳米结构的TiO2薄膜. 利用X射线衍射(XRD), X射线光电子能谱(XPS), 扫描电子显微镜(SEM)及光电化学方法对得到的薄膜进行表征. XRD测试结果表明, 经过阳极氧化并在350 ℃空气气氛中退火1 h的薄膜中存在锐钛矿晶型的TiO2. XPS的结果表明, 样品中的N元素取代部分O, 且N的摩尔分数为0.95%. SEM显示, 经阳极氧化后薄膜表面出现多孔纳米结构. 光电化学测试结果显示, 阳极氧化提高了N掺杂TiO2薄膜在可见光下的光电响应. 经阳极氧化并热处理的薄膜在0 V电位及可见光照射下光电流密度为2.325 μA·cm-2, 而单纯热处理的薄膜在相同条件下光电流密度仅为0.475 μA·cm-2. 阳极氧化得到纳米多孔结构提高了N掺杂纳米TiO2薄膜的表面积, 从而对可见光的响应增大.     

Effects of Some Topological Ingredients on the Evolutionary Ultimatum Game

This study aims at figuring out the crucial topological ingredients which affect the outcomes of the ultimatum game located on different networks,encompassing the regular network,the random network,the small world network,and the scale-free network.With the aid of random interchanging algorithm,we investigate the relations between the outcomes of the ultimatum game and some topological ingredients,including the average range,the clustering coefficient and the heterogeneity,and so forth.It is found that for the regular,random and small-work networks,the average range and the clustering coefficient have evident impacts on the ultimatum game,while for the scale-free network the original degree heterogeneity and the underlying rich-club characterizations are the mainly important topologica ingredients that influence the outcomes of ultimatum game substantially.     

CO吸附和加氢反应过程的原位高压MAS NMR研究

应用原位变温高压MAS核磁共振技术,对比研究了CO在不同Rh基催化剂上的吸附和加氢反应过程. ²⁹Si MAS NMR研究结果表明：Rh基催化剂中加入金属助剂后,载体Silicate-1上的表面硅羟基减少,助剂金属与硅羟基作用锚锭在载体表面.¹³C MAS NMR研究结果表明：当引入CO/H2混合气后,在Rh/Silicate-1催化剂上只能观测到气相CO、线式吸附CO和孪式吸附CO的快速交换信号;而在Rh-Mn/Silicate-1和Rh-Mn-Li/Silicate-1催化剂上,还观测到了倾斜式吸附的CO共振信号,表明助剂Mn或Mn-Li的加入促进了CO的吸附. 随着反应温度升高,CO/H₂在Rh/Silicate-1催化剂上转化生成CO_²,进一步升高温度会有CH₄生成;而CO/H₂在RhMnLi/Silicate-1催化剂上反应活性更高,在较低的温度下就会转化生成CO₂,但未观测到甲烷的生成. ¹H MAS NMR 谱显示,反应后载体Silicate-1上硅羟基的量会减少,表明CO与载体部分表面硅羟基反应生成了CO₂.     

原子力显微扫描云纹法的相移技术研究

提出一种原子力显微镜扫描云纹法的相移新技术 ,运用原子力显微镜的压电扫描头作为相移元件 ,对所得云纹图像可进行 0 - 2 π范围内的四步相移。对该方法的测量原理和实验技术进行了详细的阐述。作为典型实验和应用实例 ,分别对由全息光栅和含热变形的电子封装试件栅形成的云纹进行相移分析。成功的实验结果表明 ,该方法是可行的 ,为微米云纹方法的条纹处理提供了一种新途径。该方法可望在微观变形的云纹法测量中发挥积极作用     

用复变量表示的环壳几何非线性方程及其摄动解

本文从小应变,中小转动问题的弹性薄壳一般方程出发,导出用复未知函数表示的非线性的环壳轴对称变形的基本方程,并用摄动方法分別求解了整环壳和开口环壳问题.所得到的结果与其他作者用数值方法得到的结果吻合很好。     

Fe/SnO2非晶多层膜的磁特性

研究了高频溅射制备的Fe/SnO₂非晶多层膜的磁特性.当SnO₂层厚度d_s固定为5nm时，样品的饱和磁化强度M_s随Fe层厚度d_m的减小而降低，这主要受样品的死层效应和维度效应的影响.另外，在d_m很小时，样品呈现准二维磁性.样品居里温度T_C随d_m的减小单调下降.样品矫顽力H_c随d_m的变化呈现 关键词：     

高温云纹干涉法的进展

本文对云纹干涉法在高温范围的测量应用进行了回顾。对制栅方法、高温云纹干涉光路系统及高温云纹干涉法在材料高温蠕变测量、高温蒸气管道现场蠕变测量、激光焊接残余应变分析等中的应用进行了简述     

用激光加工硅钢片降低铁损残余变形的云纹干涉法测量研究

应用双镀层高温高频光栅和云纹干涉法对激光加工硅钢片降低铁损的残余变形进行了测量研究。分别对采用ＣＯ２连续激光和ＹＡＧ脉冲激光不同参数处理后硅钢片表面的残余变形进行了测量，对双镀层Ｃｒ－Ｃｒ光栅的制作方法、云纹干涉法测量残余变形的原理进行了讨论。实验结果表明，硅钢片在激光加工后，试件表面产生负性残余应变是细化磁畴，降低铁损的直接原因