用重离子实验数据推算质子翻转截面和轨道翻转率

空间单粒子辐射环境主要由重离子和高能质子构成,但在地面利用两种离子评估器件单粒子效应敏感度成本太高,因此利用重离子实验数据推算质子敏感参数成为一个非常活跃的研究课题.利用Barak经验公式,在重离子实验获得器件的σ LET值曲线的基础上,计算了几种典型器件在不同能量下的质子翻转截面以及典型轨道上质子引起的翻转率,并同FOM方法预示的质子翻转率进行了比较,其结果将对卫星电子系统抗辐射加固设计具有重要参考价值. The radiation environments concerned with single event upset mainly consist of heavy ions from cosmic ray and large flux proton from solar events and planetary radiation belts. The most reliable calculation for SEE rate induced by proton and henvy ions are the way to use the experimentally measured data rospectively. But it is too expensive to test devices with both heavy ions and protons. So it is necessary to derive models for predicting proton cross sections and rates from heavy ion test data....     

Mutual Information of Pauli Channels with Correlated Noise

A general formula for the mutual information of the Paufi channels with memory modelled by correlated noise is derived. It is shown that the mutual information depends on the channel shrinking factor, the input state parameter and the channel memory coefficient. The analyses based on the general formula reveal that the entanglement is always a useful resource to enhance the mutual information of some Pauli channels, such as the bit flip channel and the bit-phase flip channel. Our analyses also show that the entanglement is not advantageous to the reliable transmission of classical information for some Pauli channels at any time, such as the phase flip channel and the phase damping channel.     

精品课程建设为大学物理课程教学基本要求实施奠定基础

本文介绍了对理工科类大学物理课程教学基本要求的实施与完善教学试点工作的进展情况．提出高等院校大学物理课程如何与《新课标》高中物理的有机衔接是面临的新课题,对本校大学物理课程内容、教学过程基本要求执行方案进行了梳理总结,并提出了进一步的试点方案．     

BEPCII Injector Linac Upgrade and Beam Instabilities

The upgrade project of the Beijing Electron Positron Collider （BEPCII） and its injector linac is working well. The linac upgrade aims at a higher injection rate of 5OmA/min into the storage ring, which requires an injected beam with low emittance, low energy spread and high beam orbit and energy stabilities. This goal is finally reached recently by upgrading the linac components and by dealing with rich and practical beam physics, which are described in this study.     

Molecular Dynamics Simulations of Helium Behaviour in Titanium Crystals

Molecular dynamics simulations are performed to investigate the behaviour of helium atoms in titanium at a temperature of 30OK. The nucleation and growth of helium bubble has been simulated up to 50 helium atoms. The approach to simulate the bubble growth is to add helium atoms one by one to the bubble and let the system evolve. The titanium cohesion is based on the tight binding scheme derived from the embedded atom method, and the helium-titanium interaction is characterized by fitted potential in the form of a Lennard-Jones function. The pressure in small helium bubbles is approximately calculated. The simulation results show that the pressure will decrease with the increasing bubble size, while increase with the increasing helium atoms. An analytic function about the quantitative relationship of the pressure with the bubble size and number of helium atoms is also fitted.     

Simulation of Helium Behaviour in Titanium Crystals Using Molecular Dynamics

The behaviour of helium in Ti crystals at 300 K has been investigated by means of the molecular dynamics. The study is focused on the influences of He-Ti interaction on the aggregation of helium atoms in the substrate. When a Born-Mayer potential is used to describe the He-Ti interaction, the He atoms are unable to cluster with each other due to the weak bridge barrier that cannot trap the helium atoms, Whereas using a He-Ti potential that is constructed by fitting the ab initio pairwise He-Ti potential, the clustering of He atoms can be observed. The results indicate that suitable He-Ti potential plays an important role in the formation of He clusters in metals. Moreover, it is noted that the shape of the formed He cluster is irregular, and the produced defect prefers to congregating on one side of the He cluster rather than spreading symmetrically around it.     

超薄宽带平面聚焦超表面及其在高增益天线中的应用

针对相位梯度超表面在灵活操控电磁波与提高天线增益中的潜在应用,提出一种新型的宽带超表面单元,实现了在较宽频带范围内操控电磁波波前与提高天线增益.本文首先设计了一种圆环十字形对称单元来控制反射波的相移量,单元厚度为1 mm,尺寸为0.3λ_0(λ_0=20 mm),工作频段15—18 GHz,而后验证了由该单元组成的相位梯度超表面在15—18 GHz范围内对电磁波的奇异反射与聚焦特性.最后将设计的反射聚焦超表面应用于提高天线增益中,仿真与测试结果均表明,天线最高增益在15—18 GHz内平均增加了11 d B且-1 dB增益带宽为15—18 GHz(相对带宽为18.2%).由于厚度薄、重量轻、频带宽,设计的该单元拓展了相位梯度超表面在微波领域的应用,有望为高增益天线的实现提供新的方法.     

可见-近红外光谱的模型转移分类方法

基于光谱技术建立的多元校正模型通常条件下只适用于同一台仪器、相同的测试条件及同批次或同类别的样品.在仪器、测试环境、样品发生变化后,已建光谱模型不再适配,需要进行模型转移.模型转移是限制光谱技术推广应用的关键技术瓶颈,模型转移是否成功直接影响到可见-近红外光谱技术的推广应用,为此,综述了其研究现状,并探讨了其未来发展方...     

水下弹性微穿孔吸声结构吸声系数研究

利用模态叠加法建立了水介质微穿孔板的数学模型,基于声电类比法得到其等效电路模型。研究了弹性微穿孔板和弹性背腔对垂直入射吸声系数的影响。与空气介质中的微穿孔板不同,水下微穿孔板因结构阻抗不足,难以取得满意的吸声效果,为此提出了增强型微穿孔吸声结构,并在水介质阻抗管内对理论结果予以验证。结果表明,随着增强型弹性微穿孔板弯曲刚度的增大,其在[20,2000]Hz范围内的平均吸声系数得到提高,逐步趋近于刚性微穿孔板的结果,弹性背板使微穿孔吸声结构的吸声峰向低频移动,低频吸声效果得到提高。     

高定向石墨表面金纳米粒子和金纳米线的研究

利用真空沉积方法在高定向石墨(HOPG)基底上直接制备了粒径分布较小的金纳米粒子.超高真空扫描隧道显微镜(STM)研究发现,在74℃退火后,表观直径为2.5nm的金纳米粒子在HOPG基底上形成了排列均匀的准一维纳米粒子链,并且此金纳米粒子链结构稳定.在122℃退火后,不同粒径的金纳米粒子在HOPG基底表面上聚合长大形成了准一维金纳米线.这一发现为制备由金粒子组成的有序纳米结构开辟了探索途径.