锂掺杂提高硫氰酸亚铜的电学特性及在钙钛矿太阳电池中的应用

高效钙钛矿太阳电池中通常采用有机p型半导体材料作为空穴传输层.有机材料在湿度、温度、紫外照射等环境因素下会出现严重的性能衰退,加速钙钛矿太阳电池的老化,成为实现其实际应用的主要障碍之一.本文提出采用无机硫氢酸亚铜(CuSCN)作为空穴传输材料,并通过锂掺杂提高其空穴传输特性;在此基础上采用聚[双(4苯基)(2,4,6-三甲基苯基)胺]修饰CuSCN表面,避免CuSCN和碘化铅(PbI₂)间的相互作用,实现了大晶粒、致密钙钛矿薄膜的制备,最终实现了钙钛矿太阳电池性能的有效提升.本工作为稳定、高效钙钛矿太阳电池的制备提供了可借鉴的策略.     

Device research on GaAs-based InAlAs/InGaAs metamorphic high electron mobility transistors grown by metal organic chemical vapour deposition

This paper applies a novel quad-layer resist and e-beam lithography technique to fabricate a GaAs-based InAlAs/InGaAs metamorphic high electron mobility transistor (HEMT) grown by metal organic chemical vapour deposition (MOCVD). The gate length of the metamorphic HEMT was 150~nm, the maximum current density was 330~mA/mm, the maximum transconductance was 470~mS/mm, the threshold voltage was -0.6~V, and the maximum current gain cut-off frequency and maximum oscillation frequency were 102~GHz and 450~GHz, respectively. This is the first report on tri-termination devices whose frequency value is above 400~GHz in China. The excellent frequency performances promise the possibility of metamorphic HEMTs grown by MOCVD for millimetre-wave applications, and more outstanding device performances would be obtained after optimizing the material structure, the elaborate T-gate and other device processes further.     

激光对电视成像跟踪系统的软杀伤效应研究

分析了电视成像跟踪系统的组成原理,在开展脉冲激光干扰CCD的实验基础上,进行了激光对电视成像跟踪系统的软杀伤实验与理论分析。实验指出,激光对电视成像跟踪系统的软杀伤主要是对CCD光电探测系统的软杀伤,软杀伤效果如何与激光成像是否位于跟踪系统的波门之内有很大关系。     

The research on suspended ZnO nanowire field-effect transistor

This paper reports that a novel type of suspended ZnO nanowire field-effect transistors (FETs) were successfully fabricated using a photolithography process, and their electrical properties were characterized by I--V measurements. Single-crystalline ZnO nanowires were synthesized by a hydrothermal method, they were used as a suspended ZnO nanowire channel of back-gate field-effect transistors (FET). The fabricated suspended nanowire FETs showed a p-channel depletion mode, exhibited high on--off current ratio of ～10⁵. When V_DS=2.5 V, the peak transconductances of the suspended FETs were 0.396 μS, the oxide capacitance was found to be 1.547 fF, the pinch-off voltage V_TH was about 0.6 V, the electron mobility was on average 50.17 cm²/Vs. The resistivity of the ZnO nanowire channel was estimated to be 0.96× 10²Ω cm at V_GS = 0 V. These characteristics revealed that the suspended nanowire FET fabricated by the photolithography process had excellent performance. Better contacts between the ZnO nanowire and metal electrodes could be improved through annealing and metal deposition using a focused ion beam.     

夹具对复合材料加筋板剪切试验屈曲载荷的影响

复合材料加筋板在剪切载荷作用下的屈曲和后屈曲性能试验是难度较高的结构试验,载荷通常需要由设计合理的夹具传递到试件上,本文采用的是对拉式的剪切试验夹具.在试验中,由于引入的夹具是弹性体,与试件结合成一体,参与了屈曲过程,所以与理想的约束情况有差异.本文采用数值方法,模拟夹具对试验结果的影响,发现不同的夹持模型,对屈曲载荷...     

基于灰度相关的图像匹配算法的改进

针对目前图像匹配算法中存在的匹配精度不高和匹配速度慢的缺点，对基于灰度相关的2类匹配算法——最小误差法和相关系数法进行了改进。最小误差法采用新的ML距离法，提出动态调整阈值的方法，既保证了匹配精度，又避免了局部噪声的影响；相关系数法对相关系数的计算公式进行了简化，并采用三步搜索策略进行匹配，以达到减少计算量和搜索位置的目的。实验证明：改进后的算法，在保证一定匹配精度的条件下，匹配速度大大提高，能够满足实际应用中的实时性要求。     

Realization of an All-Fibre Self-Organization Intra-Cavity Coherent Erbium-Doped Fibre Laser

An intra-cavity coherent coupling Michelson Er-doped fibre （EDF） laser （MCEDFL） is proposed and demonstrated. Characteristics of the MCEDFL are investigated. It is found that the MCEDFL with a polarizer can be coherent combined effectively. By the experiment based on fibre Bragg gratings （FBGs） with different reflectivity, we find that the reflectivity of the FBG play a vital role in improving the performance of the MCEDFL. This outcome adequately shows many favourable features, such as high efficiency, easy operation, and simple all-fibre configuration.     

CSPD-1溶液物理显影研究

本文介绍了命名为CSPD-1溶液物理显影处理工艺,用于中国全息干板的实验研究结果;全面地总结了实验操作中的技术关键问题;对观察到的新工艺优越性产生的机制,作了初步的理论讨论。     

随机桁架结构的非平稳随机动力响应分析

本文研究了随机桁架结构在非平稳随机激励下的动力响应问题。在利用随机因子法分析随机结构动力特性的基础上，给出了一种分析随机结构非平稳随机响应的新方法。从结构非平稳随机响应的表达式出发，同时考虑桁架结构的物理参数、几何尺寸的随机性，利用求解随机变量函数矩的方法和求解随机变量数字特征的代数综合法，导出了随机桁架结构在非平稳随机激励下位移响应均方值和应力响应均方值的均值、方差和变异系数的计算表达式。通过算例，分析了结构物理参数和几何尺寸的随机性对结构位移响应均方值和应力响应均方值随机变量随机性的影响。本文方法具有对随机结构进行一次动力分析便可求得动力响应的数字特征，且可以考察结构任一参数的随机性对结构非平稳随机响应分析结果的影响之优点。     

球形纤维素吸附剂对Cu~(2+)的吸附动力学与热力学研究

以离子液体([Bmim]Cl)为反应介质,丙烯酸为单体,对纤维素进行均相接枝共聚,并采用油包水反相悬浮技术制得球形纤维素吸附剂。采用静态吸附实验方法研究了该吸附剂对水溶液中Cu2+的吸附性能,包括各种因素(溶液pH值,溶液初始浓度,吸附时间,吸附温度)对吸附效果的影响。研究结果表明,适当提高溶液pH值,增加溶液初始浓度,以及延长吸附时间都有利于改善吸附效果;球形纤维素吸附剂对Cu2+的吸附符合Langmuir吸附等温式,吸附过程是自发的放热过程;吸附剂对Cu2+的吸附符合二级吸附动力学模型,吸附过程由膜扩散和颗粒内扩散联合控制。球形纤维素吸附剂对Cu2+的具有很好的吸附性并具有良好的再生性能,可以循环使用。