Approximation of transient temperatures in complex geometries using fractional derivatives

It is shown that time-dependent temperatures in a transient, conductive system can be approximately modeled by a fractional-order differential equation, the order of which depends on the Biot number. This approximation is particularly suitable for complex shapes for which a first-principles approach is too difficult or computationally time-consuming. Analytical solutions of these equations can be written in terms of the Mittag-Leffler function. The approximation is especially useful if a suitable fractional-order controller is to be designed for the system.     

Discrete semi-stable distributions

The purpose of this paper is to introduce and study the concepts of discrete semi-stability and geometric semi-stability for distributions with support inZ ₊. We offer several properties, including characterizations, of discrete semi-stable distributions. We establish that these distributions posses the property of infinite divisibility and that their probability generating functions admit canonical representations that are analogous to those of their continuous counterparts. Properties of discrete geometric semi-stable distributions are deduced from the results obtained for discrete semi-stability. Several limit theorems are established and some examples are constructed.     

Grid‐free surface vorticity method applied to flow induced vibration of flexible cylinders

In order to study cross flow induced vibration of heat exchanger tube bundles, a new fluid–structure interaction model based on surface vorticity method is proposed. With this model, the vibration of a flexible cylinder is simulated at Re=2.67 × 10⁴, the computational results of the cylinder response, the fluid force, the vibration frequency, and the vorticity map are presented. The numerical results reproduce the amplitude‐limiting and non‐linear (lock‐in) characteristics of flow‐induced vibration. The maximum vibration amplitude as well as its corresponding lock‐in frequency is in good agreement with experimental results. The amplitude of vibration can be as high as 0.88D for the case investigated. As vibration amplitude increases, the amplitude of the lift force also increases. With enhancement of vibration amplitude, the vortex pattern in the near wake changes significantly. This fluid–structure interaction model is further applied to simulate flow‐induced vibration of two tandem cylinders and two side‐by‐side cylinders at similar Reynolds number. Promising and reasonable results and predictions are obtained. It is hopeful that with this relatively simple and computer time saving method, flow induced vibration of a large number of flexible tube bundles can be successfully simulated. Copyright © 2004 John Wiley & Sons, Ltd.     

Damage and fracture evaluation of granular composite materials by digital image correlation method

This paper presents the applications of digital image correlation technique to the mesoscopic damage and fracture study of some granular based composite materials including steelfiber reinforced concrete, sandstone and crystal-polymer composite. The deformation fields of the composite materials resulted from stress localization were obtained by the correlation computation of the surface images with loading steps and thus the related damage prediction and fracture parameters were evaluated. The correlation searching could be performed either directly based on the gray levels of the digital images or from the wavelet transform (WT) coefficients of the transform spectrum. The latter was developed by the authors and showed higher resolution and sensitivity to the singularity detection. Because the displacement components came from the rough surfaces of the composite materials without any coats of gratings or fringes of optical interferometry, both surface profiles and the deformation fields of the composites were visualized which was helpful to compare each other to analyze the damage of those heterogeneous materials. The project supported by the National Natural Science Foundation of China (10125211 and 10072002), the Scientific Committee of Yunnan Province for the Program of Steel Fiber Reinforced Concrete, and the Institute of Chemical Materials, CAEP at Mianyang     

Phase Measurement Algorithm in Wavelength Scanned Fizeau Interferometer

Wavelength scanned interferometry allows the simultaneous measurement of top surface shape and optical thickness variation of a transparent object consisting of several parallel surfaces. Interference signals from these surfaces can be separated in frequency space, and their phases are detected by discrete Fourier analysis. However, these signal frequencies are shifted from the detection frequency by the refractive index dispersion of the object and a nonlinearity of the wavelength scanning. The Fourier analysis is sensitive to the detuning of the signal frequency and suffers from the multiple-beam interference noise. Conventional error-compensating algorithms cannot be applied to an object consisting of more than three reflecting surfaces. We derive a new 2N-1 sample error-compensating algorithm, which allows the phase detection of any order of harmonic frequency among the interference signals. The new algorithm suppresses the effect of signal frequency detuning as well as the multiple-beam interference noise and can be applied to the measurement of complex objects consisting of more than three reflecting surfaces.     

Interaction of two parallel plane jets of different velocities

The interaction of two parallel plane jets of different velocities is studied by flow visualization and PIV measurement to examine the influence of velocity ratio on the development ofjets in the initial region. It is found that the parallel plane jets develop toward the high velocity side and the jet width is reduced with a decrease in the jet velocity ratio. Corresponding to the variation of mean velocity field to the velocity ratio, the magnitudes of turbulence intensities, Reynolds stress and static pressure are weakened in the merging region of the jets and their peak locations of the properties are shifted to the high velocity side. These results indicate that the interaction of two parallel jets is weakened with a decrease in the velocity ratio of the jets.     

The 7th Asian Symposium on Visualization

The 7th Asian Symposium on Visualization (7ASV) was successfully held in Singapore from 3^rd to 7^th November 2003. This event was originally scheduled from 26^th to 30^th May 2003, but had to be postponed because of the outbreak of SARS (Severe Acute Respiratory Syndrome) in some parts of the world. A total number of 122 participants attended the Symposium of which, 107 were foreign participants from 16 countries (excluding Singapore) worldwide. There were 104 papers covering broad range of topics presented at the Symposium which were delivered in 2×7 long sessions, and 9 keynote papers.     

Aharonov–Bohm oscillations observed in nanoscale open-dot structures fabricated in an InAs surface inversion layer

We fabricated nanoscale open-dot structures in an InAs surface inversion layer using an atomic-force-microscope oxidation process. Due to its superior nanofabrication capability, small open-dot structures with the feature size ranging between 100 and 300 nm were successfully fabricated. The magnetoresistance signal measured at 4.2 K showed reproducible fluctuations and a periodic oscillation component that varies in both amplitude and periodicity depending on the dot size. We show that the period of the oscillations corresponds to that of the Aharonov–Bohm effect and propose that the possible mechanism for the oscillations is due to the formation of a one-dimensional electron channel enclosing the open-dot structure as a result of the electron transfer from the InAs oxide to InAs.     

Quantum Hall effect in back-gated InAs/GaSb heterostructures under a tilted magnetic field

We investigate the quantum Hall effect (QHE) in the InAs/GaSb hybridized electron–hole system grown on a conductive InAs substrate which act as a back-gate. In these samples, the electron density is constant and the hole density is controlled by the gate-voltage. Under a magnetic field perpendicular to the sample plane, the QHE appears along integer Landau-level (LL) filling factors of the net-carriers, where the net-carrier density is the difference between the electron and hole densities. In addition, longitudinal resistance maxima corresponding to the crossing of the extended states of the original electron and hole LLs make the QHE regions along integer-ν_net discontinuous. Under tilted magnetic fields, these R_xx maxima disappear in the high magnetic field region. The results show that the in-plane magnetic field component enhances the electron–hole hybridization and the formation of minigaps at LL crossings.     

Electron-active cyclotron resonance in p-doped InMnAs in high magnetic fields

We present a theoretical and experimental study of electron-active cyclotron resonance in p-doped InMnAs in high magnetic fields. Results are based on an 8-band Pidgeon–Brown model generalized to include finite k_z effects and s(p)–d exchange interaction between itinerant carriers and Mn d-electrons. The e-active transitions in the valence band in p-doped samples take place due to the nature of multiple valence bands (heavy and light holes). We have calculated the absorption spectra in high magnetic fields and identified optical transitions which contribute to the cyclotron resonance for both e-active and h-active polarizations. Calculations show agreement with experimental results.