Instability of quark matter core in a compact newborn neutron star with moderately strong magnetic field

It is explicitly shown that if phase transition occurs at the core of a newborn neutron star with moderately strong magnetic field strength, which populates only the electron’s Landau levels, then in the β -equilibrium condition, the quark core is energetically much more unstable than the neutron matter of identical physical condition.     

<Emphasis Type="Italic">J/Ψ</Emphasis>production

For more than 25 yearsJΨ production has helped to sharpen our understanding of QCD. In proton induced reaction some observations are rather well understood while others are still unclear. The current status of the theory ofJΨ production will be sketched, paying special attention to the issues of formation time andJΨ re-interaction in a nuclear medium.     

Hydrophobicity-induced drying transition in alkanethiol self-assembled monolayer—water interface

During the course of our investigation of the electron transfer properties of some redox species through highly hydrophobic long chain alkanethiol molecules on gold in aqueous and non-aqueous solvents, we obtained some intriguing results such as unusually low interfacial capacitance, very high values of impedance and film resistance, all of which pointed to the possible existence of a nanometer size interfacial gap between the hydrophobic monolayer and aqueous electrolyte. We explain this phenomenon by a model for the alkanethiol monolayer—aqueous electrolyte interface, in which the extremely hydrophobic alkanethiol film repels water molecules adjacent to it and in the process creates a shield between the monolayer film and water. This effectively increases the overall thickness of the dielectric layer that is manifested as an abnormally low value of interfacial capacitance. This behaviour is very much akin to the ‘drying transition’ proposed by Lum, Chandler and Weeks in their theory of length scale dependent hydrophobicity. For small hydrophobic units consisting of apolar solutes, the water molecules can reorganize around them without sacrificing their hydrogen bonds. Since for an extended hydrophobic unit, the existence of hydrogen bonded water structure close to it is geometrically unfavourable, there is a net depletion of water molecules in the vicinity leading to the possible creation of a hydrophobic interfacial gap.     

Experimental observation of quantum corrections to electrical resistivity in nanocrystalline soft magnetic alloys

X-ray diffraction patterns of nanocrystalline Fe-Cu-Nb-Si-B (FINEMET) alloys reveal that bcc α-Fe/α-FeSi crystallites with the average grain size of 20(5) nm are dispersed in amorphous matrix. Enhanced electron—electron interaction (EEI) and quantum interference (QI) effects as well as electron-magnon (and/or electron-spin fluctuation) scattering turn out to be the main mechanisms that govern the temperature dependence of resistivity. Of all the inelastic scattering processes, inelastic electron-phonon scattering is the most effective mechanism to destroy phase coherence of electron wave functions. The diffusion constant, density of states at the Fermi level and the inelastic scattering time have been estimated, for the first time, for the alloys in question Article presented at the International Symposium on Advances in Superconductivity and Magnetism: Materials, Mechanisms and Devices, ASMM2D-2001, 25–28 September 2001, Mangalore, India.     

On additives, morphological evolution and dielectric breakdown in low density polyethylene

A series of low density polyethylene systems has been studied with respect to structural evolution and short-term dielectric breakdown behaviour. All materials were based upon a single polymer, that is commonly used in high voltage applications, but with different additives. In all three of these systems, multiple melting transitions were observed, as a result of molecular fractionation effects during crystallization. In the virgin polymer, a space-filling banded spherulitic morphology was found to develop at low temperatures (102 °C and below) whereas, at higher temperatures, only a few isolated axialites were observed. Inclusion of the antioxidant resulted in greatly increased nucleation densities, such that, at low temperatures, no evidence of spherulitic organisation remained. At higher temperatures, sheaf-like lamellar aggregates developed, which were much smaller and much more numerous than in the case of the virgin polymer. Further addition of dicumyl peroxide (DCP) resulted in the rapid formation of a crosslinked network at 200 °C. Some crosslinking also occurred at 150 °C, but over a much longer timescale. Where extensive crosslinking occurred prior to crystallization, the resulting gel inhibited structural development, such that only a few small, isolated sheaves were able to form at 102 °C. In view of the principal application area of this material, the breakdown strength of each of the above systems was then measured and the whole data set was analysed statistically. When structural factors were considered alongside the statistics, no clear trends emerged to indicate that either the compositional or morphological variations were reflected in the short-term electrical failure processes.     

Effects of B′-site transition metal on the properties of double perovskites Sr2FeMO6 (M=Mo, W): B′ 4d-5d system

The crystal structure, magnetic and magnetotransport properties of the variation of B′-site transition metal in Sr₂FeMO₆ (M=Mo, W) with double perovskites structure have been investigated systematically. Measurements of magnetization vs. temperature at H=5 T show that Sr₂FeMoO₆ is a ferromagnet and Sr₂FeWO₆ is an antiferromagnet with T_N∼35 K. Additionally, the large magnetoresistance ratio (MR) of ∼22% (H=3 T) at room temperature (RT) was observed in the Sr₂FeWO₆ compound. However, the Sr₂FeMoO₆ compound did not show any significant MR even at high fields and RT (MR∼1%; H=3 T and 300 K). The implications of these findings are supported by band structure calculations to explain the interaction between the 4d(Mo) and 5d(W) orbitals of transition metal ions and oxygen ions.     

Quantum diffusion

Basic ideas and results which characterize quantum diffusion of defects in quantum crystals like solid helium as a new phenomenon are presented. Quantum effects in such media lead to a delocalization of point defects (vacancies, impurities etc.) and they turn into quasiparticles of a new type—defectons, which are characterized not by their position in the crystal lattice but by their quasimomentum and dispersion law. Defecton-defecton and defecton-phonon scattering are considered and an interpolation formula for the diffusion coefficient valid in all interesting temperature and concentration regions is presented. A comparison with the experimental data is made. Some alternative points of view are discussed in detail and the inconsistency of the Kisvarsanyi-Sullivan theory is shown.     

Compulsorily Phase Locked Interferometer Using Orthogonally Polarized Light Source of a Modulated LD with High Extinction Ratio

This paper describes a compulsorily phase locked differential interferometer using an orthogonally polarized light source of a modulated LD with high extinction ratio to reduce non-linearity of the interferometer caused by polarization cross-talk. The current modulated LD is used as a light source to make the interferometer compact and for the scanning phase of the interferometer. The interferometer is operated compulsorily at the maximum inclination point of the fringe intensity curve by fringe scanning and an electric system. A Wollaston prism of high extinction ratio (50 dB) is used to combine the polarizing beams and to make the polarization cross-talk very small. In one light source the polarized output beams are on the same propagation axis; in the other they have a small crossing angle (2.5 mrad ∼ 10 mrad) to completely exclude non-linearity of the interferometer causded by polarization cross-talk. Using jets of a gas mixture of nitrogen and ethylene, this interferometer was demonstrated to be useful in detecting the photothermal effect of a photothermal velocimeter under phase fluctuation in a turbulent flow.     

Extraction-ability and -selectivity of tetra-aza-crown ethers for transition metal cations

In order to investigate the relative effects of the differences between the structures and lipophilicities of 1, 10-dioxa-4, 7, 13, 16-tetra-azacyclo-octadecane (TA-18-crown-6) and the tetrabenzyl derivative of 1,10-dioxa-4, 7, 13, 16-tetra-azacyclo-octadecane (TBTA-18-crown-6) on their extraction-abilities and -selectivities for transition metal cations, constants of the overall extraction (logK _ex) of 1:1 (M:L) complexes, the distribution (K _D) for two diluents (CH₂Cl₂ and CHCl₃) with different dielectric constants have been determined at 25 ± 0.1 °C. The magnitude of logK _ex is largely determined by that of K _D. The equilibrium constants of TA-18-crown-6 have been compared with those of TBTA-18-crown-6. It is found that:(i) logK _ex sequences of TA-18-crown-6 and TBTA-18-crown-6 for transition metals in CH₂Cl₂ lie in order: Fe³⁺ > Cu²⁺ > Mn²⁺ > Co²⁺ > Cd²⁺ > Ni²⁺ > Zn²⁺ and Fe³⁺ > Cu²⁺ > Co²⁺ > Mn²⁺ > Ni²⁺ > Cd²⁺ > Zn²⁺ respectively; (ii) the stability sequences of two types of tetra-aza-crown ethers with the transition metal cations in CHCl₃ are the same as follows: Fe³⁺ > Ni²⁺ > Cu²⁺ > Co²⁺ > Zn²⁺ > Cd²⁺ > Mn²⁺, and (iii) unusual selectivities are observed for transition metal-tetra-aza-crowns, e.g. the high Fe³⁺/M ⁿ⁺ selectivity factors (S_f) of TA-18-crown-6, except for the competitive-extractions for the special case in CHCl₃ of TBTA-18-crown-6, it was found that the Mn²⁺/M ⁿ⁺ values were relatively higher according to the other transition metal cations. A systematic sequence in these two types of solvents is not found for a given transition metal cation in terms of the variation of selectivity with the tetra-aza-crown ethers. The results provide alternatives for the rational design of other specific ligands on the transition metal cations.