由蒽醌衍生的二价和三价过渡金属偶氮配合物及其致突变－畸变作用

制备了4-(5′-氨基萘-3′-磺酸)偶氮-(2″-N-(4苁,6苁-二氯-S-三嗪)苯-5″-(β-羟乙基砜硫酸酯)-2-甲基蒽醌(2a),4-(2′-氨基苯磺酸)偶氮-(2″-N-(4苁,6苁-二氯-S-三嗪)-3″-苯磺酸)-2-甲基蒽醌,4-(5′-氨基萘-3′-磺酸)偶氮-(2″-N-(4苁,6苁-二氯-S-三嗪)苯-5″-(β-羟乙基砜硫酸酯)-2-甲基蒽醌和4-(p-(β-羟乙基砜硫酸酯)偶氮-(2″-N-(4苁,6苁-二氯-S-三嗪)萘-5″-磺酸)-2-甲基蒽醌的FeIII,CoII金属配合物,并在安姆/沙门氏菌/微粒体致突变试验(Ames/Salmonella/Microsome Test)和大鼠胚胎中测定其致突变-畸变作用。不管是否使用代谢赋活剂S9mix,2a-Fe和2a-Co对TA98 and TA100菌株均无致突变-畸变作用。     

The obtaining of NiCr2O4 nanoparticles by unconventional synthesis methods

This paper presents a study regarding the obtaining of NiCr₂O₄ by two new unconventional synthesis methods: (i) the first method is based on the formation of Cr(III) and Ni(II) carboxylate-type precursors in the redox reaction between the nitrate ion and 1,3-propanediol. The thermal decomposition of these complex combinations, at ~300 °C, leads to an oxide mixture of Cr₂O_3+x and NiO, with advanced homogeneity, small particles and high reactivity. On heating this mixture at 500 °C, Cr₂O₃ reacts with NiO to form NiCr₂O₄, which was evidenced by FT-IR and X-ray diffractometry (XRD) analysis; (ii) the second method starts from a mechanical mixture of (NH₄)₂Cr₂O₇ and Ni(NO₃)₂·6H₂O. On heating this mixture, a violent decomposition at 240 °C with formation of an oxides mixture (Cr₂O₃ + CrO₃) and NiO takes place. On thermal treatment up to 500 °C, an intermediary phase NiCrO₄ is formed, which by decomposition at ~700 °C leads to NiCr₂O₄, evidenced by FT-IR and XRD analysis. NiCr₂O₄ is formed, in both cases, starting with a temperature higher than 400 °C, when the non-stoichiometric chromium oxide (Cr₂O_3+x ) loses the oxygen excess and turns to stoichiometric chromium oxide (Cr₂O₃), which further reacts with NiO.     

Optimization of Microwave-Assisted Extraction (MAE) for the Isolation of Antioxidants from Basil (Ocimum basilicum L.) by Response Surface Methodology (RSM)

Abstract

The recovery of antioxidants from basil (Ocimum basilicum L.) was modeled with the aid of response surface methodology (RSM) using microwave-assisted extraction (MAE). Face-centered central design (FCCD) was employed to optimize the MAE operational parameters including the extraction time (1 to 7?min), extraction temperature (30 to 120?°C), solid-to-solvent ratio (0.1 to 0.4), and solvent concentration (20 to 80% ethanol, v/v), and to obtain the best possible combinations of these parameters for a high antioxidant yield from basil. The total antioxidant capacity (TAC) was expressed in trolox (TR) equivalents per gram of dried sample (DS). Three of the operational parameters (temperature, extraction time and solvent concentration) were shown to have significant effect on the extraction efficiency of antioxidants in basil extracts (p?<?0.05). The solvent concentration was shown to be the most significant factor on antioxidant yield obtained by MAE. There was a close relationship between experimental and predicted values using the proposed method. This optimized MAE method shows an application potential for the efficient extraction of antioxidants from basil in the food and pharmaceutical industries.     

Interaction of Sodium Dodecyl Sulfate with Poly(ethyleneimine) in Bulk Solution and at the Air-Solution Interface

Interaction of sodium dodecyl sulfate (SDS) with the cationic polyelectrolyte poly(ethyleneimine) (PEI) was investigated in this study. Turbidity measurements were performed in order to analyze the interaction and complex formation in bulk solution as a function of polymer concentration and pH. Surface tension measurements were made to investigate the properties of SDS/PEI/water mixtures at air/solution interface. Results revealed that SDS/PEI complexes form in solution depending on the surfactant and polymer concentration. A decrease was observed in surface tension values in the presence of SDS/PEI mixtures compared to the values of pure SDS solutions. Both solution and interfacial properties exhibited pH dependent behavior. A shift was seen in the critical micelle concentration of SDS solutions as a function of PEI concentration and solution pH. Monovalent and divalent salt additions showed some influence on the interfacial properties of SDS solutions in the presence of PEI.     

Cloud point extraction of aluminum (III) in water samples and determination by electrothermal atomic absorption spectrometry,flame atomic absorption spectrometry and UV-visible spectrophotometry

Cloud point extraction was applied as a preconcentration step for the determination of trace level of Al(III) in water samples with electrothermal atomic absorption spectrometry (ETAAS), flame atomic absorption spectrometry (FAAS) and UV-visible spectrophotometry. The aluminum was extracted as aluminum-Eriochrome Cyanine R (ECR) complex, at pH 6 by micelles of the non-ionic surfactant octylphenoxypolyethoxyethanol (Triton X-114). The investigations showed that the same CPE procedure can be used for different detection techniques. The results obtained from these techniques were evaluated. Under the optimal conditions, limit of detection obtained with ETAAS, FAAS and UV-visible spectrophotometry were 0.03 ng mL^?1, 0.06 µg mL^?1 and 0.01 µg mL^?1, respectively. The accuracy of the procedure was tested by analysing certified reference material. The method was successfully applied to determination of aluminum in water samples and dialysis fluid.     

Selective back-extraction and preconcentration of zinc(II) from metal-1,3,5-triketone extracts prior to its determination by flame atomic absorption spectrometry

A simple back-extraction method was developed for the separation and preconcentration of trace levels of zinc from different matrices. Ethyl-2-(4-methoxybenzoyl)-3-(4-methoxyphenyl)-3-oxopropanoylcarbamate (EMPC) was used as a new complexing agent for the extraction of zinc(II) from the aqueous sample phase to the methyl isobutyl ketone (MIBK) phase as Zn(EMPC)₂ complexes. The Zn(II) can be selectively stripped with 1?mL of 0.5?mol?L^?1 HCl from Mⁿ⁺(EMPC)_n complexes [Ag(I), Al(III), Cd(II), Cr(III), Cu(II), Fe(II), Fe(III), Mn(II), Ni(II), Pb(II) and Pd(II)] which dissolved in MIBK phase. Some experimental parameters, which are important for the whole extraction process, including pH, sample volume, shaking time, amount of the EMPC reagent, amount of MIBK, ionic strength, and type of back-extractant were investigated. The recovery for Zn(II) was greater than 95%. The detection limit of the method was found to be 0.2?µg?L ^{? 1} and the relative standard deviation as 6.4%. The concentrations of Zn(II) in the certified reference materials (LGC6019 river water and NIST-1547 peach leaves) by the presented method were in good agreement with the certified values. The proposed method was succesfully applied to the determination of zinc in some natural waters, rice, hair, soil, and tea samples.     

Microstructure of nickel nanoparticles embedded in carbon films: case study on annealing effect by micromorphology analysis

The presented study is aimed at analyzing the surface texture of amorphous hydrogenated carbon layers containing nickel nanoparticles (Ni‐NPs@a‐C:H) within their structure, which were deposited by Radio Frequency (RF) sputtering and RF‐Plasma Enhanced Chemical Vapor Deposition (RF‐PECVD) methods on glass substrates. Prepared films were then used as research material following their annealing at two different temperatures of 250 °C and 350 °C in an inert argon atmosphere. Series of height samples were taken with the help of atomic force microscopy (AFM) operating in a non‐contact mode and examined in order to determine their fractal characteristics. Raw AFM data were first plane‐fitted to remove the surface bow exhibiting the so‐called residual surface, and then numerically processed to calculate the Areal Autocorrelation Function (AACF), which was later used to compute the Structure Function (SF). The log–log plots of the latter served for calculation of fractal properties of surfaces under investigation, including fractal dimension D, and pseudo‐topothesy K. The analysis of 3‐D surface texture helps to understand their essential characteristics and their implications as well as graphical models and their implementation in computer simulation. Copyright © 2016 John Wiley & Sons, Ltd.     

Copper-catalyzed NH/SH functionalization: A strategy for the synthesis of benzothiadiazine derivatives

A copper-mediated NS bond-forming reaction via NH/SH activation is described. This reaction occurs under mild conditions with high efficiency, step economy, and tolerates a wide variety of functional groups, providing an efficient means of accessing biologically important 1,2,4-benzothiadiazin-3(4H)-ones.     

Anti-diabetic Properties of Calcium Channel Blockers: Inhibition Effects on Aldose Reductase Enzyme Activity

Applied Biochemistry and Biotechnology - Aldose reductase (AR) belongs to NADPH-dependent oxidoreductases and converts glucose to sorbitol in the polyol pathway. AR inhibition is essential to...