Photoinduced electron transfer at liquid|liquid interfaces. Part VII. Correlation between self-organisation and structure of water-soluble photoactive species

The self-organisation of a variety of dyes at the water|1,2-dichloroethane interface was studied by admittance measurements, photocurrent–potential curves and light polarisation anisotropy of the photocurrent. The heterogeneous photo-oxidation of ferrocene was studied at interfaces sensitised by Sn(IV) meso-tetra-(4-carboxyphenyl) porphyrin dichloride (SnTPPC), chlorin e-6, protoporphyrin IX (protoIX) and Fe(III) protoporphyrin IX chloride (Fe-protoIX). Cyclic voltammograms and capacitance voltage curves exhibit different features associated with the self-assembly of the dye species at the liquid|liquid boundary. In the case of SnTPPC, the capacitance curves displayed the characteristic responses commonly associated with the specific adsorption of ionic species. On the other hand, chlorin e-6, protoIX and Fe-protoIX show rather complex behaviour suggesting not only changes in the excess charge but also in the dielectric permittivity of the interface. Differences in the photocurrent efficiency were also observed under the same experimental conditions. The relative magnitude of the photocurrent responses were rationalised in terms of the phenomenological electron transfer rate constant, the photon capture cross-sections and the lifetime of the triplet state as obtained from nanosecond flash photolysis. Finally, the average molecular orientation of the adsorbed photoactive species was estimated from the photocurrent dependence on the angle of light polarisation in total internal reflection. The results show a clear correlation between the orientation of the transition dipole and the distribution of the peripheral carboxyl groups responsible for the hydrophilic nature of the dyes.     

Polychlorinated polyamides—III. Synthesis and characterization of polyamides derived from perchloroterephthaloyl dichloride

Six new polyamides have been prepared either by polymerization in solution or by interfacial polymerization by reacting perchloroterephthaloyl dichloride with aromatic diamines. The polymers were characterized by i.r. spectroscopy, elemental analysis, DSC, and TGA. The glass transition temperature, the melting temperature, and the thermal decomposition temperature have been determined. In order to estimate the molecular weights, intrinsic viscosities were determined. Some of the polymers showed high thermal stability.     

Selenium speciation by coupling vesicle mediated HPLC with off-line ETAAS and on-line focused microwave digestion HG-AAS detection

A novel High Performance Liquid Chromatography (HPLC) method for the separation of selenium species with specific detection by off-line Electrothermal Atomization Atomic Absorption Spectrometry (ETAAS) or on-line focused microwave digestion (MW) Hydride Generation Atomic Absorption Spectrometry (HG-AAS) is described. Vesicular mobile phases of the cationic surfactant didodecyldimethylammonium bromide (DDAB) have been evaluated for the liquid chromatographic separation of inorganic selenium (selenite and selenate) and different selenoaminoacids (selenocystine, selenomethionine and selenoethionine) on a C(18) reversed-phase column modified by DDAB molecules. The effects of different parameters (pH, buffer and vesicle concentrations) of the mobile phase on the retention times have been determined. The detection limit for selenium with the proposed off-line HPLC-ETAAS method has been found to be 5 microg/L of Se. The detection limit using HPLC-"on line" focused microwave digestion-HG-AAS has been found to be 1 microg/L of Se, with a precision (repeatability) better than +/- 5%. The latter proved to be an exceptional on-line real-time chromatographic detector for selenium speciation purposes.     

Applications of the MBPT in the localized representation

Diagrammatic formulation of the MBPT is applied when the occupied and the virtual canonical orbitals are separately localized by unitary transformations. In this localized representation, due to the off-diagonal Fock matrix elements, the perturbation operator contains extra terms generating the so-called localization corrections. These corrections enter the perturbation energy in third and higher orders. Their magnitude depends on the type of localization, but they represent only a small fraction of the canonical corrections. The calculation of the localization corrections, however, does not need a significant amount of extra computer time. It is shown that by introducing an “order of neighborhood” local and nonlocal effects of the electron correlation can be separated and the contribution of the nonlocal effects can be neglected to a good approximation. Ab initio calculations have been carried out for the normal saturated hydrocarbons: C_2n+1H_4n+4 and for the all-trans conjugated polyenes C_2n+2H_2n+4. As to the ratio of the local and nonlocal corrections, it is shown that there is only a quantitative difference for these two kinds of systems (strongly or weakly localizable). Neglecting nonlocal effects, considerable amount of computer time can be saved.     

Rapid spectrophotometric determination of chlorate with dimedone bisthiosemicarbazone monohydrochloride

Summary Dimedone bisthiosemicarbazone monohydrochloride has been examined to evaluate its usefulness as a reagent for rapid and sensitive Spectrophotometric determination of chlorate (0.5–5.0 ppm) by oxidation of the reagent in 70% perchloric acid medium and measurement of the yellow product. The molar absorptivity at 417 nm is 1.86×10⁴ l·mole^–1·cm^–1. The relative standard deviation is 1.6% for 2.5 ppm of chlorate.

---

Spektropbotometrische Bestimmung von Chlorat mit Dimedonbisthiosemicarbazon-monocblorhydrat (I)

Zusammenfassung Die Verwendbarkeit von I als Reagens für die rasche und empfindliche spektrophotometrische Bestimmung von 0,5–5,0 ppm Chlorat durch Oxydation von I in 70%iger Perchlorsäure und Messung des gelben Reaktionsproduktes wurde untersucht. Die molare Absorptivität bei 417 nm beträgt 1,86×10⁴ l·mol^–1·cm^–1. Die relative Standardabweichung beträgt 1,6% für 2,5 ppm Chlorat.

     

Solubility and Flory Huggins parameters of SBES, poly(styrene-b-butene/ethylene-b-styrene) triblock copolymer, determined by intrinsic viscosity

Solubility parameter and Flory Huggins interaction parameter of a triblock SBES have been obtained from intrinsic viscosity measurements. The solubility of the block copolymer in all solvents (methyl-cyclohexane, cyclohexane, cyclopentane, toluene and benzene) was found good except in the case of n-hexane. The results obtained are similar to other found in literature for SBR and SBS rubbers, and indicate that cyclohexane and cyclopentane and methylcyclohexane are the most compatible solvents for this kind of polymer.     

Iron(III)-catalyzed Prins-type cyclization using homopropargylic alcohol: a method for the synthesis of 2-alkyl-4-halo-5,6-dihydro-2H-pyrans

[reaction: see text] A new Prins-type cyclization between homopropargylic alcohol and aldehydes in the presence of FeX(3) to obtain 2-alkyl-4-halo-5,6-dihydro-2H-pyrans in good yield is described. Osmium-catalyzed cis dihydroxylation provided direct access to trans-2-alkyl-3-hydroxy-tetrahydro-pyran-4-ones. Anhydrous ferric halides are also shown to be excellent catalysts for the standard Prins cyclization using homoallylic alcohol. Isolation of an intermediate acetal provides substantiation of a proposed mechanism.     

The synthesis of thienocycloheptenoindoles

A synthesis of the methylthieno[3,2-c]cyclohepteno[b]indole 7 from 2-methylthieno[3,2-b]cycloheptanone 3 is described. Unsuccessful attempts to prepare the isomeric thienocycloheptenoindole system present in formula 2 , from the dihydrobenzothiophenone 8 , and from derivatives of 5-(2-thienyl)-4-oxopentanoic acid, 17 and 18 , and from N-benzylcycloheptindol-1-one 22 were unsuccessful. The preparation of 4,5-dihydro-2-phenyl-1-thienylmethyl-3H-pyridazin-3-one 20 and of the 5-aminopyrazole 21 are reported.     

A density functional theory study on the electrocyclization of 1,2,4,6-heptatetraene analogues: converting a pericyclic to a pseudopericyclic reaction

A comprehensive B3LYP/6-31+G* study on the electrocyclization of 1,2,4,6-heptatetraene analogues was conducted. Starting from the cyclization of (2Z)-2,4,5-hexatrienal, a pericyclic disrotatory process favored by the assistance of a electron lone pair, we incorporated small modifications in its molecular structure to obtain a truly pseudopericyclic process. To this purpose electronegative atoms (fluorine and nitrogen) were added to give a more electrophilic character on the carbon atom which is attacked by the electron lone pair of the oxygen atom. The complete pathway for each reaction was determined, and changes in magnetic properties were monitored with a view to estimating the aromatization associated with each process. This information, together with the energetic and structural results, allowed us to classify the reactions as pseudopericyclic or pericyclic. Among all studied reactions only one was a truly pseudopericyclic process and another was a borderline case. The features of this unequivocally pseudopericyclic case were analyzed in depth.