混沌状态下永磁同步发电机的故障诊断——LMI法研究

本文以永磁同步风力发电机为研究对象, 在两相同步旋转坐标系下建立了永磁同步发电机的数学模型. 应用时间尺度和线性仿射变换建立了系统混沌模型, 验证了系统在某些参数和工作条件下会出现混沌运动. 随后在考虑系统不确定性的情况下设计了故障观测器, 在系统发生故障时, 通过所设计的故障观测器能对混沌状态下永磁同步发电机的故障做出准确估计. 仿真结果表明基于线性矩阵不等式方法的故障观测器能够对系统故障做出快速准确的诊断. 关键词： 永磁同步发电机 混沌 非线性不确定系统 故障诊断     

甘氨酸色氨酸寡肽链的红外光谱的密度泛函研究

运用密度泛函理论, 在6-31 G(d) 基组水平上对甘氨酸色氨酸交替组成的六种寡肽链结构进行几何优化, 并进行了结合能和振动光谱地分析. 结果表明, 寡肽的生长利于结构的稳定性. 随着肽链的生长, 单一基团的振动存在蓝移或奇偶震荡现象; 同类官能团的耦合振动存在红移现象; 而肽链端部基团的振动频率基本不变. 这些丰富的频移现象和尺寸效应、耦合效应、诱导效应、奇偶效应等因素共同竞争有关. 该结果对应用红外光谱对寡肽链的残基数及长度地测量等工作有指导意义. 关键词： 寡肽链 红外光谱 耦合效应 尺寸效应     

基于光声光谱技术的NO,NO2气体分析仪研究

NO, NO₂是大气污染源中的常见气体, 对环境具有严重的危害性. 为检测污染源中这两种气体的浓度, 构建了成本较低的基于红外热辐射光源的光声光谱气体检测系统. 分析计算得到了NO, NO₂ 在2500–6667 nm波段吸收谱线. 通过建立光声传输线RLC振荡电路模型和仿真得到品质因数、声压大小与谐振腔长、内腔半径以及调制频率的关系, 据此设计了光声池几何结构. 实验表明该系统所测得的光声信号与气体浓度有很好的线性关系, 并且对NO, NO₂气体极限检测灵敏度分别达到4.01 和1.07 μL. 通过调节激光发射波长和选取滤波片, 该系统还可用于其他微量气体的浓度检测. 关键词： 大气污染 光声光谱 气体检测     

Scholte波与含泥沙两相流介质属性关系的分析及仿真验证

基于四种超声悬浮液模型Urick, Urick-Ament, HT, Mcclements分析了Scholte波在两相流体与多孔介质固体界面处的传播特性. 结合各模型的复波数表达式建立含泥沙流体-多孔介质固体界面波特征方程, 分析了Scholte波速与两相流体积含量、粒径等介质属性的关系. 通过仿真实验获得界面波信号, 运用时延估计获得Scholte波速与泥沙含量、粒径的关系, 发现所得的波速与Urick-Ament和HT理论有相对好的一致性. 关键词： Scholte波 两相流体 多孔介质 泥沙含量     

Theory studies of the local lattice distortions and the EPR parameters for Cu2+, Mn2+ and Fe3+ centres in ZnWO4

The local lattice distortions and the electron paramagnetic resonance (EPR) parameters (g factors, hyperfine structure constants and zero-field splittings) for Cu²⁺, Mn²⁺ and Fe³⁺ in ZnWO₄ are theoretically studied based on the perturbation calculations for rhombically elongated octahedral 3d⁹ and 3d⁵ complexes. The impurity centres on Zn²⁺ sites undergo the local elongations of 0.01, 0.002 and 0.013 Å along the C₂ axis and the planar bond angle variations of 8.1°, 8.0° and 8.6° for Cu²⁺, Mn²⁺ and Fe³⁺, respectively, due to the Jahn–Teller effect and size and charge mismatch. In contrast to the host Zn²⁺ site with obvious axial elongation (～0.31 Å) and perpendicular (angular) rhombic distortion, all the impurity centres demonstrate more regular octahedral due to the above local lattice distortions. The copper centre exhibits significant Jahn–Teller reductions for the spin-orbit coupling and orbital angular momentum interactions, characterised by the Jahn–Teller reduction factor J (≈0.29 ? 1). The calculated EPR parameters agree well with the experimental results. The local structures of the impurity centres are analysed in view of the corresponding lattice distortions.     

Morphology Development in Multi‐Component Polymer Blends: I Composition Effect on Phase Morphology in PP/PET Polymer Blends

The relationship of the phase morphology of polypropylene/polyethylene‐terephthalate (PP/PET) blends and their corresponding compatibilized blends with composition was investigated using digital image analysis. A diameter, d _g , was defined and calculated to discuss the phase morphology of this polymer blend system. A figure‐estimation method was introduced to determine the width of the distribution of d _g . Based on the method, it is proven that the distribution of d _g obeys a log‐normal distribution and consequently, the distribution width, σ was calculated. Further, a fractal dimension, D _f , was introduced to describe the distribution of main sizes of the particles of the dispersed phase. The results showed that, while d _g increased with the concentration of the dispersed phase, σ and D _f show different dependence relations on composition;σ increases monotonously but D _f shows a maximum at a PET content of 30%, indicating that, even though the whole size distribution is much broader, the distribution of the main body of size becomes more uniform when the content of PET is less than 30%.     

Large Strain Tensile Deformation and Failure in Oriented Isotactic Polypropylene/Clay Nanocomposite: Role of Voiding and Molecular Orientation

Plane strain compression of isotactic polypropylene iPP)/clay nanocomposite in a channel die at 140 and 160°C, respectively, has been adopted to prepare oriented samples with well-controlled structure for comparative studies. Molecular orientation in the amorphous phase, independent of clay loadings, decreases with increasing preparation temperature, whereas crystallographic orientation is nearly the same for all oriented samples. Severer voiding and void coalescence during stretching, mostly induced by the crystals and inter-chain sliding in the amorphous phase, respectively, is suggested to be responsible for higher volume dilatation and lower failure strain in the oriented samples prepared at higher temperature (e.g., 160°C). Fracture toughness is well correlated with the molecular orientation and crystal-dependent voiding in the oriented samples with respect to preparation temperatures. Furthermore, debonding of clay in the iPP matrix, especially in the oriented samples prepared at 140°C, is another contributor to the enhanced toughness.     

Effect of Injection Parameters and Addition of Nanoscale Materials on the Shrinkage of Polypropylene Copolymer

The effect of variation of injection conditions and addition of nano-calcium carbonate (CaCO₃), nano-silicon dioxide (SiO₂) and full-vulcanized nano-powdered styrene butadiene rubber (PSBR) on the shrinkage of injection-molded polypropylene-ethylene copolymer (90/10, co-PP) were investigated. The results showed that the shrinkage was different for different locations along the flow path. The shrinkage in the length direction of the injection-molded sample varied with the adjustment of the processing parameters, while the shrinkage in the width and thickness direction was almost unchanged. The addition of nano-CaCO₃ and PSBR decreased the shrinkage of co-PP, while the shrinkage of co-PP/ SiO₂ composite was almost unchanged.     

Injection Molding Shrinkage and Mechanical Properties of Polypropylene Blends

Polypropylene (PP) blends based on isotactic polypropylene (iPP), propylene-ethylene block copolymer (bPP), and propylene–ethylene random copolymer (rPP) were prepared by melt blending and the effects of content of bPP and rPP on the shrinkage during solidification and storage and mechanical properties of the blends were studied. It was found that the addition of polypropylene copolymer could effectively reduce the processing shrinkage of iPP and the lowest shrinkage of the blends was achieved at a loading of 2 wt% bPP or rPP. The flexural modulus and tensile strength of the blends decreased a little while the impact strength and elongation at break were improved greatly compared with those of iPP.     

Microstructure,Rheology, and Potential Oil Absorbency of Poly(Butyl Methacrylate) and Poly(Hydroxyethyl Methacrylate) Blends

To prepare oil-absorptive polymers with moderate cross-linking structure, poly(butyl methacrylate) (PBMA) was synthesized as a linear hydrophobic polymer by suspension polymerization. In addition, hydroxyethyl methacrylate (HEMA), as a monomer, which could construct a network structure among the macromolecules via hydrogen bond interactions, was solution polymerized in dimethylacetamide (DMAc) with PBMA, yielding a polymer blend of PBMA and PHEMA. The solution of the polymer blend was investigated by rotational viscometry and extended rheometry. The results showed that the viscosity varied greatly with the temperature and shear rate for three different compositions. Fourier transform infrared (FTIR) spectra indicated that an entanglement or interlocking cross-linking structure of molecular chains was constructed by hydrogen bonds. The results from nuclear magnetic resonance (NMR) spectra exhibited a downfield movement of the proton peak as influenced by end groups or hydroxyls in the polymer chains. The rheological measurements demonstrated that the cross-linking structure greatly affected the rheological behavior of the blend solution. In addition, the cross-linking structure was also evaluated by oil absorbency of films.