镧掺杂水滑石材料的热分解过程研究

采用共沉淀法制备了系列La掺杂改性的含Cu类水滑石,高温焙烧得到其衍生混合氧化物材料,并用XRD,TG-DSC,FT-IR等对材料进行表征.结果表明,前驱物XRD图谱呈典型的水滑石衍射特征且颗粒结晶良好;经800℃焙烧后,掺杂La2O3含量为5.1%的样品仅有Mg1-xFexO晶相出现,说明La的掺杂提高了材料的高温稳定性,混合氧化物中的Cu离子呈高分散状态.     

瑶药野葛花中6种无机元素的测定

用原子吸收光谱法测定野葛花原生药、野葛花汤剂中的 Ca、Mg、Cu、Zn、Fe、Mn等 6种无机元素含量。结果表明 ,原药和水煎液中 Ca、Mg含量比较丰富 ;各种元素的煎出率存在着较大的差异 ,其中 Cu、Zn、Fe的煎出率较高 ,Zn最高 ,达到了 82 .5 6 % ;Ca最低 ,为 5 .5 8%。并且将其结果与葛根的无机元素做了比较。为探讨无机元素与中药药效之间的关系提供了基础数据。     

Single Production of Charged Top-Pions at High Energy Linear e+e- Colliders

The dominant decay modes of charged top-pions (π±t ) are tb or ~b. We consider the single production ofcharged top-pions in association with a top quark via e+ e- annihilation and calculate the production cross section of theprocesses e+ e- → t-bπ+ (tb-π-) at the leading order. We find that it can reach 1.2 fb with reasonable parameter values.The charged top-pions may be detected via the channel tbπ± in the future high energy e+ e- colliders.     

光学系统光阑应用的实例

介绍了一种光学组合系统，通过构造光学系统虚拟的视场光阑实现人眼屈光度测量，它是光学系统光阑应用的生动实例.     

MULTIPLICATION OF WEAK FUNCTIONS

This paper is a contionuation of [1] and is concerned with multiplication of weak functions. Here the weak functions are treated as generalized expansions in Hermite functions in [2].     

乙醇增敏光泽精－H_2O_2－Pb（Ⅱ）化学发光体系的研究及应用

本文研究了Ｈ＿２Ｏ＿２氧化光泽精发光反应及乙醇的敏化作用，发现加入乙醇可使铅催化Ｈ＿２Ｏ＿２，氧化光泽精的发光强度有较大幅度的增强；铅量在３×１０￣（－７）～８×１０￣（－５）ｇ／ｍＬ。范围内与发光强度成正比．方法检出限为０．１０μｇ／ｍＬ；对含４μｇ／ｍＬＰｂ（Ⅱ）１１次重复测定，其ＲＳＤ为２．３％．对３２种常见的阴阳离子进行了干扰实验，表明方法具有较好的选择性。本法应用于水样及沉积物标样中痕量铅的测定，结果良好。     

Non-equilibrium grain boundary cosegregation of Mo and P

The segregation of P at grain boundaries is believed to be an important cause of temper embrittlement in steels. As an alloy element, Mo may reduce the embrittlement. However, the concentration measured by Auger electron spectroscopy at the grain boundary in 2.25Cr1MoV and 12Cr1MoV showed that the concentration of P increased with that of Mo, which indicates that Mo and P cosegregated to the grain boundary in Cr-Mo steels.     

Enhanced hardness in B-doped ZnO thin films on fused quartz substrates by pulsed-laser deposition

B-doped ZnO thin films have been fabricated on fused quartz substrates using boron-ZnO mosaic target by pulsed-laser deposition technique, and the mechanical properties have been studied by nanoindentation continuous stiffness measurement technique and transmission electron microscope (TEM). Nanoindentation measurement revealed that the hardness of B-doped ZnO films, 9.32 ± 0.90 to 12.10 ± 1.00 GPa, is much greater than that of undoped ZnO films and very close to that of traditional semiconductor Si. The mean transmittance (%) is larger than 81% in the visible range (380-780 nm) for all the films, and the Hall effect measurement showed that the carrier density is around 2 × 10²⁰ cm⁻³ and the resistivity lower than 3 × 10⁻³ Ω cm. TEM characteristics show undoped thin films have more amorphous area between grains while the B-doped ZnO films have thin grain boundaries. We suggest that the grain boundaries act as the strain compensation sites and the decrease in thickness of grain boundaries enhances the hardness of the B-doped ZnO films.     

ASYMPTOTIC APPROXIMATION METHOD AND ITS CONVERGENCE ON SEMI-INFINITE PROGRAMMING

The aim of this article is to discuss an asymptotic approximation model and its convergence for the minimax semi-infinite programming problem. An asymptotic surrogate constraints method for the minimax semi-infinite programming problem is presented by making use of two general discrete approximation methods. Simultaneously, the consistence and the epi-convergence of the asymptotic approximation problem are discussed.