Graft Polymerization of Methyl Methacrylate- Acrylonitrile onto Poly(ethene-co-1-butene) and Its Toughening Effect on SAN Resin

Poly(ethene-co-1-butene)-graft-methyl methacrylate-acrylonitrile (PEB-g-MAN) was prepared by suspension grafting copolymerization of methyl methacrylate (MMA) and acrylonitrile(AN) onto PEB. PEB-g-MAN/SAN resin blends (ABMS) were prepared by blending PEB-g-MAN with styrene-acrylonitrile copolymer (SAN resin). The effects of AN/(MMA+AN) feed ratio (f_AN), PEB/(PEB+MMA+AN) feed ratio (f_PEB) and benzoyl peroxide (BPO) dosage on the monomer conversion ratio (CR), rubber's grafting ratio (GR), grafting efficiency (GE) of the copolymerization and the toughening effect of PEB-g-MAN on the SAN resin were investigated. FTIR quantitative analysis showed that when the weight percent of AN unit in the unextracted product was 21.5 wt% with f_AN of 25 wt%, the toughening effect of unextracted PEB-g-MAN on SAN resin was the highest. Gel permeation chromatography (GPC) analysis showed that when f_AN was 25 wt%, the grafted copolymer had the lowest molecular weight and ABMS had highest toughness. Transmission electron microscopy (TEM) analysis showed that the highest toughness occurred when the phase structure of ABMS was cocontinuous with f_AN of 25 wt%. When f_AN was 25 wt% PEB-g-MAN domains have numerous small SAN domains in them, which was occlusion structure. Scanning electron microscopy (SEM) analysis indicated that the ABMS fracture surfaces had plastic flow visible, which looked like a craze fibers morphology, for the sample with highest impact strength (f_AN = 25 wt%). Dynamic mechanical thermal analysis (DMA) showed that the miscibility of the PEB phase and SAN phase improved after graft copolymerization of MMA and AN onto PEB.     

Radiation-induced changes in electrical conductivity and structure of BaPbO3 after γ-irradiation

Several barium plumbate (BaPbO₃) solid samples, made from PbO and BaCO₃ powder by chemistry liquid-phase coprecipitation, were investigated before and after γ-irradiation. The solid samples were irradiated by a ⁶⁰Co γ-irradiation source whose dose rate is about 0.7?kGy per hour. The irradiation times were 0, 72, 144, 216, 288 and 360?h. Then, the four-probe method, X-ray diffraction (XRD), scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS) were used to indicate the changes in electrical conductivity and microstructure of BaPbO₃ after γ-irradiation. The XRD results indicated that the content of PbO was reduced as the irradiation dose was increased and eventually vanished from the surface of samples. However, there was no new obvious substance phase found from the XRD atlas. It seems that the PbO transformed into nearly amorphous Pb₅O₈. The conjecture could be proved by the results of annealing experiment and SEM. The XPS results seem to show that the microstructure of BaPbO₃ was slightly changed.     

Electroelastic behaviour of an annular interfacial crack between dissimilar piezoelectric layers

An annular interfacial crack between dissimilar piezoelectric layers subjected to electroelastic loadings was investigated under an electrically impermeable boundary condition on the crack surface by using the Hankel transform technique and the Cauchy singular integral equation method. The stress intensity factors and energy release rates were determined. Numerical results reveal the effects of crack configuration, electric loads and material parameters on crack propagation and growth. The results should be useful for the design of piezoelectric composite structures and devices of high performance.     

An Overview of Infrared Spectroscopy Based on Continuous Wavelet Transform Combined with Machine Learning Algorithms: Application to Chinese Medicines,Plant Classification,and Cancer Diagnosis

Abstract

Infrared spectroscopy has been a workhorse technique for materials analysis and can result in positively identifying many different types of material. In recent years there have been reports using wavelet analysis and machine learning algorithms to extract features of Fourier transform infrared spectrometry (FTIR). The machine learning algorithms contain back-propagation neural network (BPNN), radial basis function neural network (RBFNN), and support vector machine (SVM). This article reviews the important advances in FTIR analysis employing a continuous wavelet transform (CWT) and machine learning algorithms, especially in the applications of the method for Chinese medicine identification, plant classification, and cancer diagnosis.     

G波段500 W带状注扩展互作用速调管设计研究

针对太赫兹频段实现高功率面临物理机制上的难题,设计了一个G波段带状注速调管,展示了基于非相对论带状电子注和扩展互作用技术所能达到的功率水平以及影响性能的物理因素。文中设计基于电压24.5 kV、电流0.6 A,1 mm×0.15 mm的椭圆电子注,以及与之相匹配的互作用系统,即横向过尺寸哑铃型多间隙谐振腔,可以实现高功率和高增益。三维PIC仿真结果显示,在考虑实际腔体损耗的情况下,能够获得超过500 W的功率,电子效率和增益分别达到3.65%和38.2 dB。研究发现,输出功率和效率的提升很大程度上受到多间隙腔模式稳定性以及电路欧姆损耗的制约;输出腔的欧姆损耗对输出功率影响尤为显著,工程设计需要特别考虑。本文的研究为高频段带状注扩展互作用器件的研发打下了良好的基础。     

Global optical model potential describing 12C-nucleus elastic scattering

We construct a new global optical model potential to describe the elastic scattering of ¹²C. The experimental data of elastic-scattering angular distributions and total reaction cross sections for targets from ²⁴Mg to ²⁰⁹Bi are considered below 200 MeV within the framework of the optical model. The results calculated using the derived global optical potential are then compared with the existing experimental data. The reliability of the global optical potential is further tested by predicting the elastic scattering data out of the mass and energy ranges, within which the global potential parameters are determined, and reasonable results are also obtained.     

1200 V碳化硅功率MOSFET低温特性的实验表征及分析

碳化硅功率MOSFET是宽禁带功率半导体器件的典型代表,具有优异的电气性能。基于低温环境下的应用需求,研究了1200 V碳化硅功率MOSFET在77.7 K至300 K温区的静/动态特性,定性分析了温度对碳化硅功率MOSFET性能的影响。实验结果显示,温度从300 K降低至77.7 K时,阈值电压上升177.24%,漏-源极击穿电压降低32.99%,栅极泄漏电流降低82.51%,导通电阻升高1142.28%,零栅压漏电流降低89.84%(300 K至125 K)。双脉冲测试显示,开通时间增大8.59%,关断时间降低16.86%,开关损耗增加48%。分析发现,碳化硅功率MOSFET较高的界面态密度和较差的沟道迁移率,是导致其在低温下性能劣化的主要原因。     

农药辛硫磷的密度泛函理论计算及拉曼光谱分析

辛硫磷(Phoxim)是一种高效、低毒、低残留有机磷杀虫剂,能抑制胆碱酯酶活性.辛硫磷的分子构型用Gauss View 5.0构造,理论计算采用密度泛函理论(density functional theory, DFT)的B3LYP/6-31+G(d, p)基组计算农药辛硫磷的拉曼光谱,实验上则采用分辨率为2 cm~(-1)的三级显微拉曼光谱检测仪对辛硫磷-甲醇溶液,辛硫磷乳油进行拉曼光谱检测.将理论拉曼光谱与实验拉曼光谱进行对比,其中有几个对应比较一致的拉曼光谱峰分别位于667, 745, 997, 1025, 1298, 1588 cm~(-1)处.首次报道了辛硫磷的拉曼光谱,同时对辛硫磷在600～1800 cm~(-1)区间的拉曼光谱进行了指认,指出了其在相应的频移位置产生较强拉曼光谱的分子振荡模式.     

Mn2+、N2-共掺杂Zn2GeO4晶体电子结构和光学性质的研究

采用基于密度泛函理论的平面波超软赝势方法对本征Zn2GeO4,Mn2+掺杂Zn2GeO4,Mn2+/N2-共掺杂Zn2GeO4超晶胞进行了几何结构优化,计算了掺杂前后体系的晶格常数、能带结构、态密度和光学性质。结果表明,Mn离子掺入后,Mn离子3d轨道与O离子2p轨道之间有强烈的轨道杂化效应,掺杂系统不稳定,而Mn/N离子共掺后,Mn离子和N离子之间的吸引作用克服了Mn离子之间的排斥作用,能够明显地提高掺杂浓度和体系的稳定性。光学性质计算结果表明,Mn离子与N离子共掺杂能改善Zn2GeO4电子在低能区的光学跃迁特性,增强电子在可见光区的光学跃迁;吸收谱计算结果显示,Mn离子与N离子掺入后体系对低频电磁波吸收增加。     

飞行器气动参数辨识进展

飞行器气动参数辨识研究的主题,是应用系统辨识技术从飞行试验数据求取气动力,从而建立飞行器动力学系统的数学模型.它研究的对象是飞行器;解决的是空气动力学问题;采用的基本方程是飞行动力学的运动方程组;应用的研究手段是现代控制论的滤波、预测和估计理论.它是处于空气动力学、飞行力学、弹性力学和现代控制论之间的应用性研究课题. 本文综述了国内外公开发表的飞行器参数辨识研究的理论结果和实践经验,分八个专题——模型辨识,参数估计,数据预处理和相容性检验,试验设计与最佳输入,弹性与非定常效应,频域辨识,闭环辨识,辨识准度与系统验证——评述其研究进展和现状.