Block copolymer from α,ω-dihydroxyl polystyrene and polyethylene glycol

α,ω-Dihydroxyl polystyrene was synthesized by the addition of styrene oxide to polystyryl dianion initiated with sodium naphthalene. Diglyme was found to be an unsuitable solvent for the preparation of low molecular weight compounds. Block copolymerization of the α,ω-dihydroxyl polystyrenes (M?_n = 2250, 3140, and 6200) with poly(ethylene glycols) (M?_n = 404, 1960, and 5650) was pursued by introducing urethane linkages with 4,4′-diphenylmethane diisocyanate. The mechanical, thermal, and viscoelastic properties, solution viscosity, molecular weight distribution, and moisture absorption of the block copolymers obtained were examined. Incorporation of styrene blocks was found to disturb the crystallization and fusion of poly(ethylene glycol) blocks. Films cast from benzene solution were soft and elastic and absorbed up to 5.8% moisture.     

Propylene carbonate as a solvent for salting-out extraction and subsequent differential pulse polarography

Summary Selective and sensitive procedures are described for the direct differential pulse polarographic determination of antimony(III), indium(III) and cadmium(II) in propylene carbonate. This method was based on the salting-out extraction of their halide complexes into the solvent from acidic aqueous media. The extracted Sb(III), In(III) and Cd(II) complexes exhibit sharp differential pulse polarographic peaks at –0.21 V, –0.63 V and –0.72 V vs. SCE in salted-out propylene carbonate phases respectively. The lower limits of determination are 5.0g for Sb(III), 0.6g for In(III), and 0.2g for Cd(II) in 10 ml of the organic phase. A number of foreign ions are eliminated through both processes of solvent extraction and polarography using propylene carbonate.

---

Propylencarbonat als Lösungsmittel für die Fällungs-Extraktion und die nachfolgende Differential-Puls-Polarographie

Zusammenfassung Selektive und empfindliche Verfahren für die direkte Bestimmung von Sb(III), In(III) und Cd(II) in Propylencarbonat mit Hilfe der Differential-Puls-Polarographie wurden beschrieben. Die vorliegende Methode beruht auf der Fällungs-Extraktion der Halogenid-Komplexe aus wäßrig-saurem Medium in das Lösungsmittel. Die extrahierten Komplexe des Sb(III), In(III) und Cd(II) ergeben scharfe Peaks bei –0,21 V, –0,63 V und –0,72 V gegen die Kalomelelektrode in den betreffenden Propylencarbonat-Phasen. Die unteren Grenzen der Bestimmungen liegen bei 5,0g Sb, 0,6g In bzw. 0,2g Cd in 10 ml organischer Phase. Eine Anzahl Fremdionen wird durch die beiden Prozesse der Extraktion und der Polarographie in Propylencarbonat ausgeschaltet.

     

SO+(A2Π-X2Πr) emission produced from a dissociative charge-transfer reaction of He+ with SO2 at thermal energy

The extensive bands observed from the helium afterglow reaction of SO₂ in the 250–540 nm region are assigned to the new SO⁺(A²Π-X²Π_r) system produced from the He⁺/SO₂ dissociative charge-transfer reaction at thermal energy. They had been erroneously interpreted as the SO⁺₂ (C?-X?) system produced from He(2³S)/SO₂ Penning ionization. The spectroscopic constants for the SO⁺A²Π) and SO⁺(X²Π_r) states were determined.     

Multi-element determinations of trace elements in glass by instrumental photon activation analysis

An instrumental photon activation method is reported for multi-element determinations in glass. The concentrations of 17 elements in NBS standard glass can be determined by irradiation with 30-MeV bremsstrahlung and measurement of the resulting γ-rays with a Ge(Li) detector. The average of all relative standard deviations is 2.7%; the relative deviations from the NBS certified values range from 1.4 to 3.4%.     

Reaction of poly(vinyl chloride) with magnesium and grignard reagents

Reaction of poly(vinyl chloride) with magnesium under various conditions was attempted, but poly(vinyl chloride) did not react with magnesium. The reactions of poly(vinyl chloride) with benzylmagnesium chloride and allylmagnesium chloride as Grignard reagents were carried out in tetrahydrofuran at reflux temperature. It was found that the chlorine atoms in the poly(vinyl chloride) were replaced by benzyl and allyl groups by the coupling reaction, and a small amount of Grignard reagent of poly(vinyl chloride) was formed by the magnesium–halogen exchange reaction. The extent of the substitution increased with increasing reaction time and concentration of the Grignard reagent.     

Design of sugar–oligonucleotide conjugates installed gold nanoparticle for effective delivery to hepatic parenchymal cells

A novel oligonucleotide delivery system that is based on oligonucleotide–nanoparticle conjugates has been described. Installed oligonucleotides were modified with the carbohydrate at the 3′ terminus, accordingly, constructed nanoparticles display clustered carbohydrates on their outer layer for the targeted delivery of oligonucleotides. The method for the construction of ligand-functionalized nanoparticle was simple and reproducible. The stability of the nanoparticles displaying clustered carbohydrates greatly increased in serum compared to nanoparticles without carbohydrates. In order to investigate the targetability of oligonucleotide–nanoparticle conjugates into primary hepatic parenchymal cells, freshly isolated rat hepatocytes were incubated with nanoparticles and the amount of internalized gold nanoparticles was evaluated by an inductively coupled plasma mass spectroscopy analysis. Nanoparticles displaying clustered carbohydrates internalized more efficiently than nanoparticles without carbohydrate modifications. In particular, the cellular uptakes of oligonucleotide-conjugated gold nanoparticle increased 1.7 ～2.0-fold by galactose modification. Competition assay revealed that clustered galactose enhanced the internalization of the nanoparticle into primary hepatic parenchymal cells by a receptor-mediated process.

A uniqueness theorem of radially symmetric positive stationary solutions for a competition–diffusion system

In this paper, as a first step to study the global structure of solution, we treat a class of reaction–diffusion systems with competitive interaction, and discuss a uniqueness theorem of radially symmetric solutions for the system. To do this, the comparison principle and the shooting method are employed, and the spatial profile is investigated.     

The number of labeled graphs placeable by a given permutation

Let S be a finite set and σ a permutation on S. The permutation σ* on the set of 2-subsets of S is naturally induced by σ. Suppose G is a graph and V(G), E(G) are the vertex set, the edge set, respectively. Let V(G) = S. If E(G) and σ*(E(G)), the image of E(G) by σ*, have no common element, then G is said to be placeable by σ. This notion is generalized as follows. If any two sets of {E(G), (σ¹)*(E(G)),…,(σ^l−1)* (E(G))} have no common element, then G is said to be I-placeable by σ. In this paper, we count the number of labeled graphs which are I-placeable by a given permutation. At first, we introduce the interspaced Ith Fibonacci and Lucas numbers. When I = 2 these numbers are the ordinary Fibonacci and Lucas numbers. It is known that the Fibonacci and Lucas numbers are rounded powers. We show that the interspaced Ith Fibonacci and Lucas numbers are also rounded powers when I = 3. Next, we show the number of labeled graphs which are I-placeable by a given permutation is a product of the interspaced Ith Lucas numbers. Finally, using a property of the generalized binomial series, we count the number of labeled graphs of size k which are I-placeable by σ. © 1996 John Wiley & Sons, Inc.     

Study of the thermal degradability of poly(α-methylstyrene) with modified end groups

To induce degradabilities in polymers in response to environmental conditions, endm odification reactions of poly(α-methylstyrene) (PMS) derivatives were carried out. 2-Phenylallyl halide derivatives such as 2-phenylallyl bromide, 2-(p-tolyl)allyl bromide, and α-trifluoromethylstyrene were found to be suitable end-modification agents. For example, the ω-2-phenylallyl-PMS derivative was prepared with almost quantitative functionality by the reaction of the living PMS derivative with 2-phenylallyl bromide. In a similar way, ω-3,3-difluoro-2-phenylallyl- and ω-2-(4-toly)allyl-PMS derivatives were synthesized. Based on thermogravimetric analysis, the onset of the degradation temperature of the endmodified PMS derivatives decreased in the following order: ω-hydrogen- > ω-3,3-difluoro-2-phenylallyl- > ω-2-phenylallyl- > ω-2-(p-tolyl)allyl-PMS. Actually, the onset temperature of ω-2-(p-tolyl)allyl-PMS derivatives was 50°C lower than that of ω-H-PMS derivatives. These results indicate that the active species is produced effectively at the endunsaturated bond, which initiates depolymerization of the polymer at rather low temperatures. Therefore, it is concluded that a 2-phenylallyl substituent at the end of the PMS chain induces effective degradation through a radical mechanism.