Surface heating and energy transfer in pulsed microwave catalytic systems: A microwave-induced acoustic study

Since the early demonstrations of our concept of pulsed microwave catalysis in chemistry, we have witnessed the coming of age of the technique as an enabling technology in the industrial world, despite the inadequate understanding of the basic mechanisms of how microwaves interact with metallic surface sites and the subsequent energy transfer. We shall present here some very recent developments of the microwave-induced acoustic technique and its applications to a better understanding of the basic surface heating and energy transfer phenomena in pulsed microwave catalytic systems.     

Operator‐splitting method for the analysis of cavitation in liquid‐lubricated herringbone grooved journal bearings

This paper presents an operator‐splitting method (OSM) for the solution of the universal Reynolds equation. Jakobsson–Floberg–Olsson (JFO) pressure conditions are used to study cavitation in liquid‐lubricated journal bearings. The shear flow component of the oil film is first solved by a modified upwind finite difference method. The solution of the pressure gradient flow component is computed by the Galerkin finite element method. Present OSM solutions for slider bearings are in good agreement with available analytical and experimental results. OSM is then applied to herringbone grooved journal bearings. The film pressure, cavitation areas, load capacity and attitude angle are obtained with JFO pressure conditions. The calculated load capacities are in agreement with available experimental data. However, a detailed comparison of the present results with those predicted using Reynolds pressure conditions shows some differences. The numerical results showed that the load capacity and the critical mass of the journal (linear stability indicator) are higher and the attitude angle is lower than those predicted by Reynolds pressure conditions for cases of high eccentricities. Copyright © 2004 John Wiley & Sons, Ltd.     

Apparatus for High-Resolution Solid Hydrogen Matrix Isolation Spectroscopy and Its Application

Apparatus integrating a Fourier transform-infrared (FT-IR) spectrometer and a mid-infrared difference frequency generation (DFG) laser spectrometer was built for the study of the matrix isolation spectrum in solid molecular hydrogen. A 3-cm-long molecular hydrogen crystal was grown in a liquid-helium Dewar, and its infrared absorption spectrum in the 1-5 μm region was recorded to test the system. The W₀(0) (ν=0←0, J=6←0) line around 2410 cm⁻¹ of solid hydrogen was investigated with the DFG laser spectroscopy. High-resolution matrix isolation spectrum of CO² co-deposited with hydrogen on a BaF₂ cold plate at liquid-helium temperature was studied.     

Molar conductivity calculation of Li-ion battery electrolyte based on mode coupling theory

A method is proposed to calculate molar conductivity based on mode coupling theory in which the ion transference number is introduced into the theory. The molar conductivities of LiPF6, LiClO4, LiBF4, LiAsF6 in PC (propylene carbonate) are calculated based on this method. The results fit well to the literature data. This presents a potential way to calculate the conductivities of Li-ion battery electrolytes.     

Native and stearic acid modified ceria-zirconia supports in normal and reversed-phase HPLC

Porous ceria-zirconia composite with narrow particle size distribution and large specific surface area was synthesized by a sol-gel process. Chromatographic properties of the native supports was investigated in normal phase mode for the separation of test mixtures of basic, neutral and acidic compounds. The new packing material exhibited polar and basic properties, which are suitable for the separation of basic compounds. Lypophilic packing has been obtained by the modification of the ceria-zirconia with stearic acid, which exhibited strong hydrophobicity relative to the native packing. Therefore, the modified ceria-zirconia behaves as a reversed-phase packing material. Different selectivity towards basic compounds was observed on the new packing compared to the native ceria-zirconia and conventional ODS stationary phase.     

The design of an irradiator for the continuous processing of liquid latex

This paper presents anew design concept for a gamma irradiation plant for the continuous processing of pumpable liquids. Typical applications of such a plant include

• * the irradiation vulcanisation of natural latex rubber

• * disinfection of municipal sewage sludge for agricultural use

• * sterilisation of liquids in the pharmaceutical and cosmetics industries

• * industrial processing of bulk liquids

The authors describe the design and operation of the latex irradiator now operating on a small production scale in Malaysia and proposed developments.

The design allows irradiation processing to be carried out under an inert or other gaseous environment.

State-of-the-art computer control system ensures the fully automatic processing operation needed by industrial computers.     

First experiments on transmutation studies of129I and237Np using relativistic protons of 3.7 GeV

First experiments on the transmutation of long-lived¹²⁹I and²³⁷Np using relativistic protons of 3.7 GeV are described. Relativistic protons generate in extended Pb-targets substancial neutron fluences. These neutrons get moderated in paraffin and are used for transmutation as follows:¹²⁹I(n,)¹³⁰I and²³⁷Np(n,)²³⁸Np. The isotopes¹³⁰I (T _1/2-12.36 h) and²³⁸Np (T _1/2=2.117 d) were identified radiochemically. One can estimate the transmutation cross-section (n,) in the given neutron field as (¹²⁹I(n,))=(10±2)b and (²³⁷Np(n,))=(140±30)b The experiments were carried out in November 1996 at the Synchrophasotron, LHE, Dubna, Russia. The investigation has been performed at the Laboratory of High Energies, JINR, Dubna.     

Penicillin biosynthesis: Retention of configuration at c-3 of valine during its incorporation into the arnstein tripeptide

[3-³H]-valine was efficiently synthesised from sodium α-ketoisovalerate. With a β-lactam negative mutant of C. acremonium, l-[1-¹⁴C-3-³H]-valine and dl-[1-¹⁴C-3-³H]-valine were independently incorporated into the Arnstein tripeptide dimer, i.e. Bis-δ-(l-α-aminodipyl)-l-cystinyl-bis-d-valine, with full retention of trieium at C-3 of the d-valine residue. This result strongly suggested retention of configuration at C-3 of valine when the tripeptide was biosynthesised, and further limited the number of possible mechanisms for the biosynthesis of penicillins.