A study on small-world brain functional networks altered by postherpetic neuralgia

Understanding the effect of postherpetic neuralgia (PHN) pain on brain activity is important for clinical strategies. This is the first study, to our knowledge, to relate PHN pain to small-world properties of brain functional networks. Functional magnetic resonance imaging (fMRI) was used to construct functional brain networks of the subjects during the resting state. Sixteen patients with PHN pain and 16 (8 males, 8 females for both groups) age-matched controls were studied. The PHN patients exhibited decreased local efficiency along with non-significant changes of global efficiency in comparison with the healthy controls. Moreover, regional nodal efficiency was found to be significantly affected by PHN pain in the areas related to sense (postcentral gyrus, inferior parietal gyrus and thalamus), memory/affective processes (parahippocampal gyrus) and emotional activities (putamen). Significant correlation (p < 0.05) was also found between the nodal efficiency of putamen and pain intensity in PHN patients. Our results suggest that PHN modulates the local efficiency, and the small-world properties of brain networks may have potentials to objectively evaluate pain information in clinic.     

听觉频域掩蔽效应的自适应β阶贝叶斯感知估计语音增强算法

为了在噪声抑制和语音失真中之间寻找最佳平衡,提出了一种听觉频域掩蔽效应的自适应β阶贝叶斯感知估计语音增强算法,以期提高语音增强的综合性能。算法利用了人耳的听觉掩蔽效应,根据计算得到的频域掩蔽阈自适应调整β阶贝叶斯感知估计语音增强算法中的β值,从而仅将噪声抑制在掩蔽阈之下,保留较多的语音信息,降低语音失真。并分别用客观和主观评价方式,对所提出的算法的性能进行了评估,并与原来基于信噪比的自适应β阶贝叶斯感知估计语音增强算法进行了比较。结果表明,频域掩蔽的β阶贝叶斯感知估计方法的综合客观评价结果在信噪比为-10 dB至5 dB之间时均高于基于信噪比的自适应β阶贝叶斯感知估计语音增强算法。主观评价结果也表明频域掩蔽的β阶贝叶斯感知估计方法能在尽量保留语音信息的同时,较好的抑制背景噪声。      

Bi2Te3拓扑绝缘体表面颗粒化铅膜诱导的超导邻近效应

拓扑绝缘体的出现为寻找拓扑超导体和Majorana费米子提供了一种可能的途径. 在拓扑绝缘体Bi₂Te₃表面沉积极薄的不连续铅膜, 试图通过邻近效应感应出大片的超导区, 为下一步研究拓扑超导电性创造条件.借助四引线电输运测量实验, 在0.25 K的低温下看到了超流现象, 表明沉积在Bi₂Te₃表面的厚度小于20 nm的颗粒化铅膜能够诱导邻近效应, 并且使大片Bi₂Te₃超导. 关键词： 超导邻近效应 S-N-S结 拓扑绝缘体     

Non‐Isothermal Crystallization Kinetics of PA6/Attapulgite Composites Prepared by Melt Compounding

The non‐isothermal crystallization behaviors of neat polyamide 6 (PA6) and PA6/attapulgite (ATB) composites were examined using differential scanning calorimetry. The results show that ATB acts as a nucleator for PA6 matrix, accelerating the crystallization, and simultaneously obstructs the crystallization especially for the composites with higher ATB content. The analysis results using the Jeziorny and Liu equations verify the dual actions of the nucleation and the obstruction of crystallization of the ATB in the PA6 matrix. Kissinger's method is employed to obtain the activation energy of the crystallization processes; the results further indicate that the addition of ATB may also cause the above actions. It is speculated that there is a very complicated crystallization mechanism in the PA6/ATB composites based on the analysis of Avrami exponents obtained by the Jeziorny model.     

Topological Structure of Entropy of 4-Dimensional Axisymmetric Black Holes

Using the relationship between the entropy and the Euler characteristic, an entropy density is introduced to describe the inner topological structure of the entropy of 4-dimensional axisymmetric black holes. It is pointed out that the density of entropy is determined by the singularities of the timelike Killing vector field of spacetime, and these singularities carry the topological numbers, Hopf indices and Brouwer degrees, which are topological invariants. At last, Kerr–Newman black hole as an example of axisymmetric black holes is given. What’s more, the entropy and the latent heat of the topological phase transition of the black hole mentioned above are calculated and the latent heat just lies in the range of the energy of gamma ray bursts. This work is supported in part by the NSFs of China under Grant No. 10575068 and of Shanghai Municipal Committee of Science and Technology under Grant No. 04ZR14059 and Shanghai Leading Academic Discipline Project under Project Number: T0104.     

半导体纳米粒子SERS基底对大肠杆菌的无损检测研究

很多致命的疾病都与细菌感染密切相关,快速、准确地检测和鉴定细菌及微生物,一直是微生物学家及有关科研工作者追求的目标,拉曼光谱可以提供丰富的谱图信息,而表面增强拉曼光谱(SERS)有很高的检测灵敏度,然而一些贵金属SERS基底却容易使蛋白质变性,影响检测结果。以大肠杆菌(E.Coli)作为目标检测细菌,首先检测到大肠杆菌的拉曼光谱,之后采用两种不同的SERS基底(ZnO,Ag溶胶)进行检测。结果表明Ag溶胶基底有很强且较丰富的SERS信号,但是相对于E.Coli的本体拉曼谱峰有较大位移,说明与银溶胶相互作用的细菌存在一定的蛋白质变性过程;而ZnO纳米粒子与细菌作用的SERS信号虽然较弱,但是与E.Coli的本体拉曼信号较为相似,说明ZnO纳米粒子对E.Coli本体基本无损,这将有利于SERS在生物体系的无损检测。该结果可以为利用生物相容性好的半导体SERS基底进行细菌的检测提供有益的参考。     

Study on the recovery of NBTI of ultra-deep sub-micro MOSFETs

Taking the actual operating condition of complementary metal oxide semiconductor (CMOS) circuit into account, conventional direct current (DC) stress study on negative bias temperature instability (NBTI) neglects the detrapping of oxide positive charges and the recovery of interface states under the `low' state of p-channel metal oxide semiconductor field effect transistors (MOSFETs) inverter operation. In this paper we have studied the degradation and recovery of NBTI under alternating stress, and presented a possible recovery mechanism. The three stages of recovery mechanism under positive bias are fast recovery, slow recovery and recovery saturation.     

Improved method for loss measurements in planar waveguides

A method employing an isosceles prism and a right-angle one is developed for loss measurement in planar waveguides. During the measuring process, the isosceles prism is fixed and the right-angle prism fixed on the waveguide slides by following the waveguide. Only by adjusting the gap thickness we can realize the loss measurement in planar waveguides. The method is demonstrated with an Ag/Na ion-exchanged waveguide fabricated on BK7 glass from AgNO₃ melt diluted with NaNO₃ (mass ratio 1:9), with the condition of 4 h and . The experimental results show that the method has the advantages on convenient operation, accurate results and no required end polishing.     

激光跟瞄仿真系统及两种跟瞄方法

基于OpenGL和大气传输光学分析的3维全数字仿真是激光跟瞄系统的重要研究手段。为提高跟踪和瞄准精度,从激光跟瞄仿真系统整体出发,研究了目标成像中的投影变换、成像与跟踪的关系、高精度跟踪现有算法的控制过程仿真等内容,并提出了基于大视口、目标大气传输图像序列的跟瞄仿真技术。说明了仿真系统中跟瞄精度分析的特点。就某仿真场景,设计了“头部顶点”和“两点提取”两种跟瞄方法,在不同大气湍流条件下得到了它们的跟瞄精度,说明应用该激光跟瞄仿真系统,能够预先设计、测试和验证一些跟瞄方法,帮助进行算法分析和改进,从而提高工作效率和节约成本。     

BEPCII直线加速器数字延时触发器的设计与实现

针对北京正负电子对撞机II期（BEPC II）直线加速器升级改造过程中束流位置探测器（BPM）电子学对外部触发信号的需求,设计了一台高精度延时控制、上升时间短和参数灵活调节的数字延时触发器。采用FPGA（现场可编程门阵列）作为主控制器展开设计,重点介绍了基于FPGA的边沿检测模块和多通道延时处理模块的设计与仿真,描述了FPGA和驱动电路的设计方案以及在直线加速器上的应用。经测试,延时可调范围4 ns～4 μs,最小步进4 ns,步进误差0.125%;上升时间2 ns,延时抖动135.4 ps。