Effect of microstructure on the coercivity of HDDR Nd-Fe-B permanent magnetic alloy

The effect of the grain boundary microstructure on the anisotropy and coercivity was investigated in an HDDR Nd-Fe-B permanent magnetic alloy. Considering the special microstructure of its magnetic powder grain, an anisotropic theoretical model influenced simultaneously by the structure defect at the grain boundary and the exchange coupling interaction was put forward. The variations of the structure defect factors based on the nucleation and pinning mechanism with 2r ₀/lex (where r ₀ and lex are the defect thickness and the length of exchange coupling, respectively) were calculated. The results show that the coercivity mechanism of an HDDR Nd-Fe-B permanent magnetic alloy is greatly related to its microstructure defect at the grain boundary. For a fixed lex, when 2r ₀/lex < 1.67, the coercivity is controlled by the pinning mechanism; when 2r ₀/lex > 1.67, it is determined by the nucleation mechanism. The coercivity reaches the maximum when 2r ₀/lex = 1.67. The calculation result is consistent well with the experimental result given by Morimoto et al. Supported by the National Natural Science Foundation of China (Grant No. 50671055)     

Properties of proton-rich nuclei in a three-body model

Using a three-body model and realistic two-body potentials, we investigate the properties of the nuclei ¹⁸Ne and ²⁸S near the proton dripline. We figure out the two-proton separation energies, occupation of the valence protons, root-mean-square radii of matter and the valence protons. Besides, the spatial correlation densities are displayed to reflect the correlation between the two valence protons. The first excited 0⁺ state of ¹⁸Ne is most likely to be a halo state according to our calculation. Turning off the Coulomb interactions among the three-body systems, we get the two-neutron separation energies and configuration of the valence neutrons of their corresponding mirror nuclei. The results indicate that the three-body model is proper to describe some proton-rich nuclei and can be used to deduce reliable information.     

A version of Stöber synthesis enabling the facile prediction of silica nanospheres size for the fabrication of opal photonic crystals

A sol-gel synthesis procedure based on the method proposed by Stöber et al. (J Colloid Interface Sci 26:302–315, 1968) has been adopted for the one-step preparation of mono-dispersed silica nanospheres. An excellent control of the particle diameter over a wide range is obtained by varying the amount of silicon alkoxide only, while the concentration of all other components is kept fixed: this allows the fabrication of artificial opals with a finely tuned and precisely predictable lattice parameter.     

Effects of carbonization and substrate temperature on the growth of 3C-SiC on Si(1 1 1) by SSMBE

The growth of 3C-SiC on Si(1 1 1) substrate was performed at different carbonization temperatures and substrate temperatures by solid-source molecular beam epitaxy (SSMBE). The properties of SiC film were analyzed with in situ reflection high energy electron diffraction (RHEED), X-ray diffraction (XRD), atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). The best carbonization temperature of 810 °C was found to be optimal for the surface carbonization. The quality of SiC film grown on Si at substrate temperature of 1000 °C is best. The worse crystalline quality for the sample grown at higher temperature was attributed to the large mismatch of thermal expansion coefficient between SiC and Si which caused more dislocation when sample was cooled down to room temperature from higher substrate temperature. Furthermore, the larger size of single pit and the total area of the pits make the quality of SiC films grown at higher temperature worse. More Si atoms for the sample grown at lower temperature were responsible for the degradation of crystalline quality for the sample grown at lower temperature.     

Proposal for Remotely Realizing Multi-qubit Controlled-Phase Gates

A feasible proposal is explored to remotely perform a family of multi-qubit controlled-phase gates (MQCPG), with the aid of entanglement transfer and quantum repeater. To remotely realize the gates, some local transformations, including single-qubit rotating operation, controlled-NOT gate and quantum phase gate, are employed during the realization. It turns out that MQCPG can be implemented among separate spatially agents with nearly unit fidelity and success probability. Besides, required classical information consumption of the proposed scenario is worked out. Furthermore, some attractive issues are discussed including the feature of present proposal and the experimental feasibility based on current technologies. Remarkably, it is revealed that our proposal essentially accesses to several nontrivial features lying in breaking through the limitation that error probability scales exponentially with the length of the channel in the course of the realization of the gates, and well compatibility with today’s experimental technologies.     

The Essence of Operators’ Weyl Ordering Scheme and New Operator Identities for Converting Q−P Ordering to Weyl Ordering

We find new operator formulas for converting Q?P and P?Q ordering to Weyl ordering, where Q and P are the coordinate and momentum operator. In this way we reveal the essence of operators’ Weyl ordering scheme, e.g., Weyl ordered operator polynomial ${_{:}^{:}}\;Q^{m}P^{n}\;{_{:}^{:}}$ , $$\begin{aligned} {_{:}^{:}}\;Q^{m}P^{n}\;{_{:}^{:}} =&\sum_{l=0}^{\min (m,n)} \biggl( \frac{-i\hbar }{2} \biggr) ^{l}l!\binom{m}{l}\binom{n}{l}Q^{m-l}P^{n-l} \\ =& \biggl( \frac{\hbar }{2} \biggr) ^{ ( m+n ) /2}i^{n}H_{m,n} \biggl( \frac{\sqrt{2}Q}{\sqrt{\hbar }},\frac{-i\sqrt{2}P}{\sqrt{\hbar }} \biggr) \bigg|_{Q_{\mathrm{before}}P} \end{aligned}$$ where ${}_{:}^{:}$ ${}_{:}^{:}$ denotes the Weyl ordering symbol, and H _m,n is the two-variable Hermite polynomial. This helps us to know the Weyl ordering more intuitively.     

Graphene-based passively Q-switched Nd:KLu(WO4)2 eye-safe laser operating at 1,425 nm

With graphene as saturable absorber, an Nd:KLu(WO₄)₂ eye-safe laser operating at 1,425 nm is demonstrated. To the best of our knowledge, this is the first demonstration that an Nd:KLu(WO₄)₂ laser operates at the eye-safe 1.4-μm region. A maximum total average output power of 170 mW is obtained under the pump power of 9.6 W, corresponding to an optical–optical efficiency of 1.77 %. The minimum pulse width and the highest pulse repetition rate are 153 ns and 97 kHz, respectively. Also the characteristics of the graphene used as saturable absorber for a 1.4-μm laser were studied for the first time.     

Analysis of Two-Phase Cavitating Flow with Two-Fluid Model Using Integrated Boltzmann Equations

In the present work, both computational and experimental methods are employed to study the two-phase flow occurring in a model pump sump. The two-fluid model of the two-phase flow has been applied to the simulation of the three-dimensional cavitating flow. The governing equations of the two-phase cavitating flow are derived from the kinetic theory based on the Boltzmann equation. The isotropic RNG$k-\epsilon-k_{ca}$ turbulence model of two-phase flows in the form of cavity number instead of the form of cavity phase volume fraction is developed. The RNG $k-\epsilon-k_{ca}$ turbulence model, that is the RNG$k-\epsilon$ turbulence model for the liquid phase combined with the $k_{ca}$model for the cavity phase, is employed to close the governing turbulent equations of the two-phase flow. The computation of the cavitating flow through a model pump sump has been carried out with this model in three-dimensional spaces. The calculated results have been compared with the data of the PIV experiment. Good qualitative agreement has been achieved which exhibits the reliability of the numerical simulation model.     

基于MSP430的直线导轨定位装置的设计与实现

直线导轨是数控技术的重要组成部件,它的精确程度非常重要。以MSP430单片机为核心,设计了一个直线导轨精确定位装置。此装置采用两相四线的ST57型步进电机和60CM的螺纹丝杆组成一个直线导轨组,选用M7128驱动器驱动步进电机,使用PWM波精确定位算法程序精确控制电机转速。MSP430的IO端口控制步进电机的正反转,使得步进电机带动螺纹丝杆转动,让滚动丝杠上的物体往复移动,并在电脑上显示当前位移值。试验证明,其定位精度为0.01cm,具有较高的可靠性和准确性,低成本,稳定性好。