Tertiary amine-mediated synthesis of microporous carbon membranes

Microporous carbon membranes were prepared on an -alumina support by a pyrolysis of cationic tertiary amine/anionic polymer composites. The precursor solutions contain a thermosetting resorcinol/formaldehyde (RF) polymer and a cationic tertiary amine. Three types of cationic tertiary amines with different chain lengths were used, such as tetramethlammonium bromide (TMAB), tetrapropylammonium bromide (TPAB) and cetyltrimethylammonium bromide (CTAB). A porous structure was produced by a decomposition of the amine and the resulting pores assisted the further gasification of the RF polymer at high temperature. The carbon/alumina membranes have thin and continuous carbon top layers with a thickness of 1 μm. Gas permeation tests were performed using single gases of CO₂, O₂, N₂, CF₄, n-C₄H₁₀ and i-C₄H₁₀, as well as binary mixtures of CH₄/n-C₄H₁₀ and N₂/CF₄ at different temperatures between 23 and 150 °C. The carbon membrane prepared using TMAB showed separation factors higher than 650 for the CH₄/n-C₄H₁₀ mixtures and higher than 8100 for the N₂/CF₄ mixture. From the permeation of pure gases with different molecular sizes, the pore sizes of the carbon membrane prepared using TMAB, TPAB and CTAB are estimated to be 4.0, 5.0 and larger than 5.5 Å, respectively, indicating that the micropore size of the carbon membranes is controllable by using different amines.     

Metal-dependent regioselective oxidative coupling of 5,10,15-triarylporphyrins with DDQ-Sc(OTf)3 and formation of an oxo-quinoidal porphyrin

[reaction: see text] Regioselectivity of the oxidative coupling of 5,10,15-triarylporphyrin metal complexes with DDQ-Sc(OTf)(3) was dependent on the central metal and meso-aryl substituent. Oxo-quinoidal porphyrin was obtained from Ni(II) porphyrin under the same conditions.     

Synthesis of 2-alkylidenetetrahydrofurans by Ru-catalyzed regio- and stereoselective codimerization of dihydrofurans with alpha,beta-unsaturated esters

2-(1-Alkoxycarbonyl)alkylidenetetrahydrofurans were readily synthesized by the codimerization of 2,3- or 2,5-dihydrofurans with alpha,beta-unsaturated esters using a zerovalent Ru catalyst, Ru(cod)(cot), with high regio- and stereoselectivity.     

Control of photoinduced energy- and electron-transfer steps in zinc porphyrin-oligothiophene-fullerene linked triads with solvent polarity

The dramatic changes of the lifetimes of the charge-separated (CS) states were confirmed in zinc porphyrin (ZnP)-oligothiophene (nT)-fullerene (C(60)) linked triads (ZnP-nT-C(60)) with the solvent polarity. After the selective excitation of the ZnP moiety of ZnP-nT-C(60), an energy transfer took place from the (1)ZnP moiety to the C(60) moiety, generating ZnP-nT-(1)C(60). In polar solvents, the CS process also took place directly via the (1)ZnP moiety, generating ZnP(*+)-nT-C(60)(*-), as well as the energy transfer to the C(60) moiety. After this energy transfer, an indirect CS process took place from the (1)C(60) moiety. In the less polar solvent anisole, the radical cation (hole) of ZnP(*+)-nT-C(60)(*-) shifted to the nT moiety; thus, the nT moiety behaves as a cation trapper, and the rates of the hole shift were evaluated to be in the order of 10(8) s(-1); then, the final CS states ZnP-nT(*+)-C(60)(*-) were lasting for 6-7 mus. In the medium polar solvent o-dichlorobenzene (o-DCB), ZnP-nT(*+)-C(60)(*-) and ZnP(*+)-nT-C(60)(*-) were present as an equilibrium, because both states have almost the same thermodynamic stability. This equilibrium resulted in quite long lifetimes of the CS states (450-910 mus) in o-DCB. In the more polar benzonitrile, the generation of ZnP-nT(*+)-C(60)(*-) was confirmed with apparent short lifetimes (0.6-0.8 mus), which can be explained by the fast hole shift to more stable ZnP(*+)-nT-C(60)(*-) followed by the faster charge recombination. It was revealed that the relation between the energy levels of two CS states, which strongly depend on the solvent polarity, causes dramatic changes of the lifetimes of the CS states in ZnP-nT-C(60); that is, the most appropriate solvents for the long-lived CS state are intermediately polar solvents such as o-DCB. Compared with our previous data for H(2)P-nT-C(60), in which H(2)P is free-base porphyrin, the lifetimes of the CS states of ZnP-nT-C(60) are approximately 30 times longer than those in o-DCB.     

Preparation of monodisperse SiO2 nanoparticles by membrane emulsification using ideally ordered anodic porous alumina

Monodisperse SiO2 particles of nanometer dimensions were fabricated by membrane emulsification using ideally ordered anodic porous alumina. For the preparation of monodisperse emulsion droplets, the dispersed phase was pressed through a porous alumina membrane into the continuous phase. After solidification treatment of the emulsion droplets, prepared spherical SiO2 nanoparticles with uniform sizes were obtained. From scanning electron microscope observation of the obtained particles, it was confirmed that the size distribution of SiO2 nanoparticles is relatively narrow.     

Solvent extraction of sodium picrate with 15-crown-5 into carbon tetrachloride. The determination of the dimer-formation constant of a crown ether-univalent metal salt 1∶1∶1 complex

The theory is derived to determine the dimer-formation constant,K ₂, of a crown ethermetal salt 111 complex in organic solvents of low dielectric constant by solvent extraction. The theoretical predictions are verified experimentally by extraction of sodium picrate (NaA) with 15-crown-5 (15C5) into carbon tetrachloride. All the experiments were conducted at 25°C. The logK ₂ value of the Na(15C5)A complex in carbon tetrachloride has been determined to be 4.05±0.11. Moreover, the partition constant of the complex is calculated.     

1H-NMR study of polyisoprenes

¹H-NMR spectra of polyisoprene were assigned using polymers of isoprene-1,1,4,4-d₄, isoprene-1,1,5,5,5-d₅, and isoprene-4,4-d₂ polymerized with various catalysts. The methylene-proton signal at 2.1 ppm in cis-1,4 - and trans-1,4-polyisoprenes was divided into H₄- and H₁-proton signals; H₄ resonated at 2.21 ppm in both cis-1,4 and trans-1,4 units whereas H₁ resonated at 2.05, 2.21, and 2.15 ppm. Splitting due to the dyad sequences of 1,4 and 3,4 units was apparent. The methine-proton (H₃) in a 3,4 unit showed a broad peak centered around 1.5 ppm in C₆D₆. The overlapping of this signal with the methyl-proton signals at 1.73 and 1.63 ppm resulted in some uncertainty in the determination of the microstructure of polyisoprene which contained a considerable amount of 3,4 unit.     

Supramolecular porphyrin-fullerene via 'two-point' binding strategy: axial-coordination and cation-crown ether complexation

A highly stable porphyrin-fullerene conjugate with defined distance and orientation, was formed using a newly developed 'two-point' binding strategy involving axial-coordination and cation-crown ether complexation; photochemical studies performed in benzonitrile revealed efficient charge separation and slow charge-recombination in the supramolecular complex.     

Determination of a polymeric hindered amine light stabilizer in polypropylene formulated with magnesium hydroxide flame retardant by reactive thermal desorption-gas chromatography.

A polymeric hindered amine light stabilizer (HALS), Tinuvin 622 (MW [symbol: see text] 4000), in PP materials formulated with a magnesium hydroxide flame retardant was determined by reactive thermal desorption (RTD) gas chromatography (GC). Two kinds of the HALS components that were formed through the RTD in the presence of tetramethylammonium hydroxide [(CH3)4NOH, TMAH] were clearly observed in the chromatograms of the PP samples, with negligible interference from the other additives and the PP substrate. Here, the coexisting flame retardant was proved to affect significantly the RTD process of the occluded HALS. As a result, the recovery of the HALS components in the RTD-GC chromatograms of the PP samples increased with increase in the content of the flame retardant. This enhancement of the HALS recovery is attributed mainly to the preferential exposure of the HALS on the surface of the ground PP sample through the interaction between the polymeric HALS and the flame retardant in the molten PP during kneading. In spite of such a considerable action of the flame retardant, the observed intensities of the characteristic peaks of HALS by RTD-GC showed a good linear relationship with the HALS content in the PP samples with constant content of the flame retardant (50 phr); this relationship could be used as the calibration line for the determination of the polymeric HALS in the PP materials containing the flame retardant.