Oligothiophene-containing coumarin dyes for efficient dye-sensitized solar cells

We have developed oligothiophene-containing coumarin dyes fully functionalized for dye-sensitized nanocrystalline TiO(2) solar cells (DSSCs). DSSCs based on the dyes gave good performance in terms of incident photon-to-current conversion efficiency (IPCE) in the range of 400-800 nm. A solar energy-to-electricity conversion efficiency (eta) of 7.4% was obtained with a DSSC based on 2-cyano-3-[5'-(1,1,6,6-tetramethyl-10-oxo-2,3,5,6-tetrahydro-1H,4H,10H-11-oxa-3a-aza-benzo[de]anthracen-9-yl)-[2,2']bithiophenyl-5-yl]acrylic acid (NKX-2677) under simulated AM 1.5G irradiation (100 mW cm(-2)) with a mask: short-circuit current density (J(sc)) = 13.5 mA cm(-2); open-circuit voltage (V(oc)) = 0.71 V; fill factor (FF) = 0.77. Transient absorption spectroscopy measurements indicated that electron injection from NKX-2677 to the conduction band of TiO(2) is very rapid (<100 fs), which is much faster than the emission lifetime of the dye (1.0 ns), giving a highly efficient electron injection yield of near unity.     

Complexation of acyclic ligands having two terminal quinoline units with alkali metal cations

Abstract

Acyclic multidentate ligands consisting of an oligooxyethylene chain (di-, tri-, tetra-, and penta-) and two terminal rigid quinaldate end groups were newly prepared and their complexation properties with alkali metal cations were estimated by the solvent extraction method to indicate a better affinity for K⁺. Among them, the tetraethylene glycol derivative showed the highest K⁺ binding on about the same level as 18-crown-6. Their conformations in solution and in the solid state were examined by using ¹H- and ¹³C-NMR spectroscopy and X-ray crystal analyses, respectively. The better binding of K⁺ in comparison with the corresponding glymes or analogues having the same donor sites was reasonably explained by considering the effective co-ordination of the carbonyl oxygen of the ester groups and the parallel π-stacking interaction between two quinaldate surfaces.     

Synthesis of the C22-C37 segment of prorocentin

The synthesis of the C22-C37 segment of prorocentin, isolated from the dinoflagellate Prorocentrum lima, was achieved. Because the relative stereochemical relationship between C26 and other stereocenters (C28/C31/C32 established as R*/R*/R*) in the C22-C37 region of natural prorocentin has not yet been determined, both epimers at C26 of the C22-C37 segment were selectively constructed. The synthesis was based on a 5-exo epoxide ring opening reaction to form an oxolane (E-ring), Brown asymmetric methallylation to install the C26-stereocenter, acryloylation of the resulting alcohol, and ring-closing olefin metathesis to establish the Z-olefin at C23/C24.     

Efficient partial hydrogenation of trichloromethyl to gem-dichloromethyl groups in platinum on carbon-catalyzed system

While gem-dichloromethyl groups can be directly synthesized by the mono-dechlorination of the corresponding trichloromethyl groups, the suppression control of the over-reduction to form chloromethyl or methyl functionalities is quite difficult. We have established the efficient and widely applicable mono-dechlorination method of the trichloromethyl groups to form the corresponding gem-dichloromethyl groups using platinum on carbon in dimethylacetamide as a specific solvent at 25 °C under a hydrogen atmosphere. The mono-dechlorination of the α,α,α-trichloromethylcarbonyl groups smoothly proceeded by the use of platinum on carbon as a catalyst in a highly chemoselective manner, while the efficient mono-dechlorination of the alkyl- and aryl-trichloromethyl groups required the combined use of Bu₃SnH.     

Asymmetric Michael addition of 2-alkoxyphenyl α-substituted nitroacetates to non-prochiral α,β-unsaturated carbonyl compounds catalyzed by podand-type alkali metal 2′-substituted 1,1′-binaphthalen-2-oxides

The asymmetric Michael addition of 2-alkoxyphenyl α-substituted nitroacetates to non-prochiral α,β-unsaturated carbonyl compounds catalyzed by 10 mol % of sodium 2′-[2-(2-methoxyethoxy)ethoxy]-1,1′-binaphthalen-2-oxide gave the desired adducts in high yields with up to 95% ee.     

Evolution and characterization of fluorite-like nano-SrBi2Nb2O9 phase in the SrO-Bi2O3-Nb2O5-Li2B4O7 glass system

Transparent glasses of various compositions in the system (100−x)Li₂B₄O₇−x(SrO-Bi₂O₃-Nb₂O₅) (where x=10, 20, 30, 40, 50 and 60, in molar ratio) were fabricated via splat quenching technique. The glassy nature of the as-quenched samples was established by differential thermal analyses. X-ray powder diffraction (XRD) and transmission electron microscopic studies confirmed the amorphous nature of the as-quenched and crystallinity in the heat-treated samples. Fluorite phase formation prior to the perovskite SrBi₂Nb₂O₉ phase was analyzed by both the XRD and high-resolution transmission electron microscopy. Dielectric and the optical properties (transmission, optical band gap and Urbach energy) of these samples have been found to be compositional dependent. Refractive index was measured and compared with the values predicted by Wemple-Didomemenico and Gladstone-Dale relations. The glass nanocomposites comprising nanometer-sized crystallites of fluorite phase were found to be nonlinear optic active.     

Effect of adsorbed water on the electrorheology of silica suspensions

Monodisperse silica particles were formed by hydrolyzing tetraethylorthosilicate in an ethanol solution and the silica suspensions dispersed in a silicone oil were prepared by a different procedure. The effects of adsorbed water on the electrorheological (ER) behavior were studied under oscillatory shear. The amounts of adsorbed water and surface silanol groups were determined by thermogravimetric analysis. The magnitude of the complex viscosity, |η^*|, increases with the application of electric fields. The physically adsorbed water is primarily responsible for the ER effect. However, the fluids containing large amounts of adsorbed water do not always show excellent ER performance. The surface silanol groups have an important role in promoting the ER effect. Not only the amount but also the situation of silanol groups determines the ER activity of adsorbed water.     

Solution-phase synthesis of alpha-human atrial natriuretic peptide (alpha-hANP)

Alpha-human atrial natriuretic peptide (alpha-hANP) was synthesized by assembling six peptide fragments in solution followed by deprotection with HF and subsequent air-oxidation. The trimethylbenzyl group was employed as an S-protecting group of cysteine. The HF-dimethylselenide-m-cresol system was employed as a final deprotecting reagent and, at the same time, as a reducing reagent of Met(O). Synthetic alpha-hANP elicited potent diuretic and natriuretic activity in rats.     

Facile solid-phase synthesis of sulfated tyrosine-containing peptides: total synthesis of human big gastrin-II and cholecystokinin (CCK)-39.

Chemical synthesis of tyrosine O-sulfated peptides is still a laborious task for peptide chemists because of the intrinsic acid-lability of the sulfate moiety. An efficient cleavage/deprotection procedure without loss of the sulfate is the critical difficulty remaining to be solved for fluoren-9-ylmethoxycarbonyl (Fmoc)-based solid-phase synthesis of sulfated peptides. To overcome the difficulty, TFA-mediated solvolysis rates of a tyrosine O-sulfate [Tyr(SO3H)] residue and two protecting groups, tBu for the hydroxyl group of Ser and 2,2,4,6,7-pentamethyldihydrobenzofuran-5-sulfonyl (Pbf) for the guanidino group of Arg, were examined in detail. The desulfation obeyed first-order kinetics with a large entropy (59.6 J.K-1.mol-1) and enthalpy (110.5 kJ.mol-1) of activation. These values substantiated that the desulfation rate of the rigidly solvated Tyr(SO3H) residue was strongly temperature-dependent. By contrast, the SN1-type deprotections were less temperature-dependent and proceeded smoothly in TFA of a high ionizing power. Based on the large rate difference between the desulfation and the SN1-type deprotections in cold TFA, an efficient deprotection protocol for the sulfated peptides was developed. Our synthetic strategy for Tyr(SO3H)-containing peptides with this effective deprotection protocol is as follows: (i) a sulfated peptide chain is directly constructed on 2-chlorotrityl resin with Fmoc-based solid-phase chemistry using Fmoc-Tyr(SO3Na)-OH as a building block; (ii) the protected peptide-resin is treated with 90% aqueous TFA at 0 degree C for an appropriate period of time for the cleavage and deprotection. Human cholecystokinin (CCK)-12, mini gastrin-II (14 residues), and little gastrin-II (17 residues) were synthesized with this method in 26-38% yields without any difficulties. This method was further applied to the stepwise synthesis of human big gastrin-II (34 residues), CCK-33 and -39. Despite the prolonged acid treatment (15-18 h at 0 degree C), the ratios of the desulfated peptides were less than 15%, and the pure sulfated peptides were obtained in around 10% yields.     

Synthesis and photophysical properties of azuleno[1′,2′:4,5]pyrrolo[2,1-b]quinazoline-6,14-diones: Azulene analogs of tryptanthrin

Azulene analog of tryptanthrin, azuleno[1′,2′:4,5]pyrrolo[2,1-b]quinazoline-6,14-dione, was successfully prepared by the condensation reaction of azuleno[2,1-b]pyrrole-2,3-dione with isatoic anhydride in the presence of sodium hydride or diisopropylethylamine (DIPEA). Its 2-halo derivatives were also obtained in high yields by the condensation reaction with 5-haloisatoic anhydrides in the presence of DIPEA. Reactivity toward electrophilic reagents was revealed by halogenation with N-bromosuccinimide (NBS) or N-iodosuccinimide (NIS) to afford 12-halo derivatives in high yields. Among the halo derivatives, 2-iodo and 12-iodo derivatives were reactive enough to afford phenylethynyl derivatives under Pd-catalyzed Sonogashira cross-coupling conditions. Within the phenylethynyl derivatives, only 12-phenylethynyl derivative was transformed into its 1,1,4,4-tetracyanobutadiene (TCBD) derivative by the reaction with TCNE. Amphoteric redox properties of the novel azulene analogs of tryptanthrin were characterized by spectroscopic and voltammetric analyses.