Slow cyclotron instability in a high-power backward-wave oscillator

The linear dispersion relation of a backward-wave oscillator (BWO), derived earlier by the authors, is modified to include effects of RF surface current at the beam-vacuum interface. This modified dispersion relation results in an unstable interaction between the slow cyclotron mode (SCM) and the structure mode in addition to the conventional Cherenkov instability caused by the slow space charge mode. Numerical analysis is then carried out using parameters of a BWO experiment at University of Maryland. Fine structure of the SCM instability is elucidated. The analysis indicates that BWO radiation would not be suppressed near cyclotron absorption in an infinitely long system.     

Stagnation flow on a cylinder with partial slip--an exact solution of the Navier-Stokes equations

The stagnation slip flow on an axially moving cylinder is studied.The Navier–Stokes and energy equations reduce to nonlinearordinary differential equations under a similarity transform.For large slip, the flow field decays exponentially into potentialflow. The heat transfer can be expressed as an incomplete gammafunction. In general, the heat transfer increases with slip,Prandtl number and Reynolds number.     

Numerical study on performance of disk MHD generator using frozen inert gas plasma

In an magnetohydrodynamic (MHD) generator using a frozen inert gas plasma (FIP), the availability of a frozen argon plasma, the influence of plasma uniformity at the generator inlet on the performance, and the feasibility of a large-scale generator are numerically examined by /spl gamma/-/spl theta/ two-dimensional simulation. The FIP is produced by pre-ionizing inert gas without an alkali metal seed at the generator inlet, then the ionization degree of the plasma is kept almost constant in the whole of the channel because of considerable slow recombination of the inert gas just like frozen reaction plasma. It is found that not only helium, but also argon frozen plasma MHD generation is realized, although highly accurate control of inlet ionization degree is necessary for argon. It is important to reduce the nonuniformity of plasma properties at the generator inlet in order to raise the maximum enthalpy extraction ratio. Even for the large-scale generator with 1000-MW thermal input, the ionization degree is kept almost constant in the whole of the channel and the high performance is obtainable. This result is extremely attractive for the FIP MHD generator.     

Nonlinear magneto-optical diffraction by two-dimensional magnetic superstructures

Nonlinear (at the second-harmonic frequency of the incident light) optical reflection by two-dimensional magnetic superstructures is theoretically studied. A square lattice of magnetic dots and a hexagonal lattice of magnetic bubbles (cylindrical magnetic domains) are considered. Because the periods of these structures are comparable with the wavelengths of the fundamental and the second-harmonic radiation, it would be possible to observe diffraction at the second-harmonic frequency. A polarization analysis of nonlinearly diffracted radiation is performed and the numbers of observable diffraction orders for the above structures are estimated. Received: 10 January 2002 / Published online: 11 June 2002     

Fluorides of ruthenium and chromium: Theoretical studies

The electronic and structural characteristics of CrF₅, CrF₄, RuF₅ and RuF₄ were studied. Ab initio (SCF-CI) calculations were performed with different structures and spin states for each complex. The favored conformation always corresponds to the highest multiplicity: doublet for CrF₅ in D_3h, triplet for CrF₄ in T_d, quadruplet for RuF₅ in C_4v and quintuplet for RuF₄ in D_4h symmetry.     

Transport of gases in aromatic polyesters: Correlation with WAXD studies

Polymer packing density can be conveniently measured by either density-based measurements (direct or estimated free volume) or wide-angle X-ray diffraction (WAXD) spectra. Previously reported diffusivity and permeability values for various polyarylates and polyimides are examined on the basis of the packing density measured by these different techniques. It is shown that in these rigid glassy polymers, the mean intersegmental distance, the d-spacing, obtained from WAXD provides a better measure of the effect of polymer packing on diffusivity than either direct density measurements or estimated free volumes. It has been possible to correlate previously reported diffusivity and sorption data for various polyarylates and polycarbonate on the basis of the WAXD investigation, using the d-spacing and the amorphous peak width, respectively. The effect of polyarylate structure on d-spacing has been studied. A series of polyarylates have been synthesized with different substituents on the bridge carbon. In this series the d-spacing remains constant while the carbonyl group density and the glass transition temperatures are varied. However, small substituents on the aromatic ring cause significant changes in the d-spacing. These results can be used to tailor polyarylates with desired intersegmental distances and chain flexibility.     

Study of the reciprocal space image of the biaxial nematic phase in the plane of the amphiphilic bilayer

High resolution synchrotron X-ray measurements have been performed on the uniaxial and biaxial phases of the lyotropic mixture potassuim laurate, decanol and water. An elegant magnetic orientational procedure allows us to obtain the cut of the reciprocal space image of the biaxial phase at the plane perpendicular to the amphiphilic bilayer. The analysis of densitometric profiles of the diffracted bands indicate an anisotropic micellar correlation in the plane of the amphiphilic bilayer. It is suggested that an anisotropic distribution of decanol and potassium laurate in this plane could be responsible for this effect.     

Kinetic model for hydrocarbon-assisted particulate boron combustion

A kinetic model is presented to describe the high temperature (1800 K < T < 3000 K) surface oxidation of particulate boron in a hydrocarbon combustion environment. The model includes a homogeneous gas-phase B/O/H/C oxidation mechanism consisting of 19 chemical species and 58 forward and reverse elementary reactions, multi-component gas-phase diffusion, and a heterogeneous surface oxidation mechanism consisting of ‘elementary’ adsorption and desorption reaction steps. Thermochemical and kinetic parameters for the surface reactions are estimated from available experimental data and/or elementary transition state arguments. The kinetic processes are treated using a generalized kinetics code, with embedded sensitivity analysis, for the combustion of a one-dimensional (particle radius), spherical particle. Model results are presented for the oxidation of a 200 μm boron particle in a JP-4/air mixture at ambient temperatures of 1400 K and 2000 K. These results include temperature and gas-phase species profiles as a function of radial distance and particle burning rates. © 1994 John Wiley & Sons, Inc.     

LIDAR mapping of ozone-episode dynamics in Paris and intercomparison with spot analyzers Supplementary material available at http://link.springer.de/journals/apb

Continuous mapping of an ozone episode in Paris in June 1999 has been performed using a differential absorption lidar system. The 2D ozone concentration vertical maps recorded over 33 h at the Champ de Mars are compiled in a video clip that gives access to local photochemical dynamics with unprecedented precision. The lidar data are compared over the whole period with point monitors located at 0-, 50-, and 300-m altitudes on the Eiffel Tower. Very good agreement is found when spatial resolution, acquisition time, and required concentration accuracy are optimized. Sensitivity to these parameters for successful intercomparison in urban areas is discussed. Received: 11 February 2002 / Published online: 14 March 2002     

Thermal conductivity of poly(vinyl chloride)/polycaprolactone blends

Thermal diffusivity, heat capacity, and density of polyvinyl chloride/polycaprolactone (PVC/PCL) blends were measured by the laser flash method, DSC, and pycnometry, respectively. The thermal conductivity of the PVC/PCL blends was determined from the results. The miscibility of the blend and crystallinity of PCL were determined by DSC. The effect of blend structure on thermal conductivity is discussed. The phase compositions of the PVC/PCL blends are of three types depending on PCL content: i.e., up to 33%, from 33 to 70%, and above 70% PCL by weight. Thermal conductivity, thermal diffusivity, and heat capacity of the PVC/PCL blends are strongly affected by the phase composition of the blend, which changes in a complicated way with PCL content. © 1994 John Wiley & Sons, Inc.