Surface and Catalytic Properties of K/V Catalysts Coating on Porous Al2O3 Substrate

The morphology of different ratio K/V catalysts supported on porous α‐alumina substrate was investigated by atomic force microscopy (AFM). Changes in the particle size distribution, pore size distribution were analyzed respectively using AFM software. In addition, their catalytic activities and compositions for carbon oxidation were studied by x‐ray diffraction (XRD), differential scanning calorimetry (DSC), and temperature‐programmed reactions (TPR). As a result, with the increase of K concentration, the mean particle size gradually increased and the mean pore size decreased. According to the catalytic activity studies, the catalytic activity of the KVO₃ and K₃V₅O₁₄ phases are more effective than KCl.     

羧甲基壳聚糖衍生物及其振动光谱的理论研究

用量子化学从头算STO 3G法研究了羧甲基壳聚糖及其衍生物的结构和稳定性，计算结果表明:1)壳聚糖单体经羧甲基化后，得到2种可能的产物，其中羧甲基在壳聚糖单体2位氨基上的取代产物较6位羟基上的取代产物稳定； 2)以羧甲基壳聚糖为母体经加成反应，得到羧甲基壳聚糖衍生物（2 羟基 3 丁氧基）丙基 羧甲基壳聚糖的2个异构体， 其中构型1更稳定.在优化构型的基础上，计算所得的构型1的振动光谱与实验结果相吻合.     

Lyotropic liquid crystalline phases formed in an ionic liquid

Lyotropic liquid crystalline phases of an amphiphilic block copolymer are constructed and characterized in an ionic liquid with comparison of component and temperature effects.     

The interfacial dilational properties of hydrophobically modified associating polyacrylamide studied by the interfacial tension relaxation method at an oil-water interface

The interfacial dilational viscoelastic properties of hydrophobically associating block copolymer composed of acrylamide (AM) and a low amount of 2-phenoxylethyl acrylate (POEA) (<1.0 mol%) at the octane-water interfaces were studied by means of the interfacial tension relaxation method. The dependencies of interfacial dilational elasticity and viscous component on the dilational frequency were investigated. The interaction of hydrophobically associating block copolymer [P(AM/POEA)] with sodium dodecyl sulfate (SDS) has been explored. The results show that at lower frequency, the dilational elasticity for different concentration copolymer is close to zero; at higher frequency, the dilational elasticity shows no change with increased frequency; At moderate frequency (10(-3)-1 Hz), the dilational elasticity decreased with a decrease in the dilational frequency. The results show that the hydrophobic groups of [P(AM/POEA)] chains can be associated by inter- or intrachain liaisons in water solution. The dilational viscous component for P(AM/POEA) comes forth a different maximum value at different frequencies when the polymer concentration is different. It is generally believed that the dilational viscous component reflects the summation of the various microscopic relaxation processes at and near the interface and different relaxation processes have different characteristic frequencies. The spectrum of dilational viscous component may appear more than once maximum values at different frequencies. The influence of SDS on the limiting dilational elasticity and viscous component for polymer solution was elucidated. For 5000 ppm polymer solution, the limiting dilational elasticity decreased with an increase in SDS concentration. The dilational viscous component passed through a maximum value with a rise in the dilational frequency, which appeared at different frequency when SDS concentration is different; and the higher is the concentration, the lower is the dilational frequency. It can be explained that macromolecules may be substituted by SDS molecules in the interface and the interaction of molecules decrease, which makes the limiting dilational elasticity decrease. For 200 ppm polymer solution, the limiting dilational elasticity increased firstly and then decreased with SDS concentration increasing. This may be explained that the interfacial polymer concentration is so low that SDS molecules absorbed in the interface dominate dilational properties of the interfacial film even at very low SDS concentration. However, SDS molecules can gradually substitute the polymer molecules in the interface with a rise in SDS concentration, which results in the decrease in the limiting dilational elasticity.     

Thermogravimetry study of the pyrolytic characteristics and kinetics of macro-algae Macrocystis pyrifera residue

Macrocystis pyrifera is one important marine macro-algae, while its residues produced by industrial alginate extraction is a hot potato. To figure out whether its residue is suitable for pyrolysis for biofuel, the pyrolytic characteristics and kinetics of macro-algae M. pyrifera residue was investigated using thermogravimetric method from 50 to 800 °C in an inert argon atmosphere at different heating rates of 5, 10, 20, and 30 °C min^?1. The activation energy and pre-exponential factor was calculated by Flynn–Wall–Ozawa, Kissinger–Akahira–Sunose, and Popescu methods, and the kinetic mechanism was deduced by Popescu method. The results showed that the primary devolatilization stage of M. pyrifera residue can be described by Jander function $ \left(\left[ {1 - \left( {1 - \alpha } \right)^{1/3} } \right]^{2}\right) $ . The average activation energy of M. pyrifera residue was 222.4 kJ mol^?1. The results suggested that the experimental results and kinetic parameters provided useful information for the design of pyrolytic processing system using M. pyrifera residue as feedstock.     

Structure and wettability relationship of coelectrospun poly (L‐lactic acid)/gelatin composite fibrous mats

Coelectrospun polylactide(PLA)/gelatin (GE) composite fibrous matrixes have been identified to exhibit much improved performances compared to the respective components; however, the reasons for their water contact angles decreasing to zero at proper PLA/GE ratios remain unclear. To get a deep understanding of the phenomenon, PLA and GE were coelectrospun with different PLA/GE ratios in this study. Although the resulting composite fibers were homogeneous in appearance, they were detected different microscopic structures by transmission electron mircroscope (TEM) and via morphological observations after selective removal of either PLA or GE component. Together with the results of degradation study in phosphate buffered solution, a kind of cocontinuous phase separation microstructure could be identified for the PLA(50 wt%)/GE(50 wt%) composite fibers, which also showed the water contact angle of 0°. This value was far lower than those of electrospun PLA (～123°) and GE (～42°) fibrous matrixes. The X‐ray photoelectron spectrometry (XPS) data revealed that the polar side groups of protein macromolecules have moved toward composite fiber surface with solvent evaporation during electrospinning, due to the hydrophobic interaction between PLA and GE. Then the excellent hydrophilicity of PLA(50 wt%)/GE(50 wt%) composite fibers could be suggested as the consequence of: (1) the cocontinuous phase separation structure could provide more interface and void for water molecules penetrating; and (2) the accumulation of polar groups on composite fiber surface significantly increased the surface wettability. Copyright © 2010 John Wiley & Sons, Ltd.     

Simultaneous determination of phthalates and adipates in human serum using gas chromatography–mass spectrometry with solid‐phase extraction

A gas chromatography–mass spectrometry assay was developed and validated for the simultaneous determination of phthalates and adipates in human serum. The phthalates and adipates studied were dimethyl phthalate, diethyl phthalate, dibutyl phthalate, benzylbutyl phthalate, di‐2‐ethylhexyl phthalate, di‐n‐octyl phthalate, diethyl adipate, dibutyl adipate, diisobutyl adipate, bis(2‐butoxyethyl) adipate and di‐2‐ethylhexyl adipate, with diisooctyl phthalate as internal standard. The extraction and cleaning up procedure was carried out with solid‐phase extraction cartridges containing dimethyl butylamine groups, which showed extraction efficiencies over 88% for each analyte and the internal standard. The calibration curves obtained were linear with correlation coefficients greater than 0.98. For all analytes, the assay gave CV% values for intra‐day precision from 4.9 to 13.3% and mean accuracy values from 91.4 to 108.4%, while inter‐day precision was 5.2–13.4% and mean accuracy 91.0–110.2%. The limits of detection for the assay of phthalates and adipates were in the range 0.7–4.5 ng/mL. The method is simple, sensitive and accurate, and allows for simultaneous determination of nanogram levels of phthalates and adipates in human serum. It was successfully applied to an investigation on the level of phthalates and adipates in a non‐occupationally exposed population.     

驱油体系化学剂间相互作用对界面吸附膜的影响

采用界面张力弛豫技术研究了不对称Gemini表面活性剂C12COONa-p-C9SO3Na、部分水解聚丙烯酰胺Mo-4000、疏水缔合水溶性聚丙烯酰胺(HMPAM)等驱油体系化学剂在癸烷/水界面上的扩张流变性质,考察了不同离子强度、不同类型电解质对体系界面流变性质的影响,计算得到界面扩张弹性模量和粘性模量的全频率谱,并通过归一化方法(cole-cole图)探讨了界面吸附膜的弛豫过程。研究发现,界面膜内分子重排和界面与体相间分子扩散交换是影响膜性质的主要弛豫过程。表面活性剂体相浓度增大有利于界面分子重排过程,而低频有利于扩散交换过程;不同结构聚合物以及不同离子强度、不同类型电解质对表面活性剂吸附膜有不同的影响。