Uniform hierarchical silica film with perpendicular macroporous channels and accessible ordered mesopores for biomolecule separation

Herein, we demonstrate that silica films with perpendicular macroporous channels and accessible ordered mesopores can be conveniently prepared. The hierarchical macroporous–mesoporous silica films are synthesized by using zinc oxide nanorod array as macroporous template and CTAB surfactant as mesoporous template. In basic surfactant-containing solution, ordered mesoporous silica shells homogeneously grow on the zinc oxide nanorod array. The growth of the mesostructures do not require any chemical modification for the zinc oxide nanorod, which opens a new way for preparing hierarchical silica films with perpendicular mesochannels. The prepared hierarchical macroporous–mesoporous silica films possess a uniform thickness of 2 mm, large perpendicular macropores with a length of 1.8 mm and a width of 80 nm, and accessible ordered mesopores. Separation experiment demonstrates that this macroporous–mesoporous film can effectively separate biomolecules with different sizes.     

多支链烷基苯磺酸钠水溶液的表面性质

用自制的四种高纯度多支链烷基苯磺酸钠,研究了支链结构对其表面性质的影响.结果表明,随支链烷基碳数增加,临界胶束浓度降低,标准吸附自由能DGadӨ更负;但是,饱和吸附量Γmax却随支链烷基碳数增加而减小,且临界胶束浓度时的表面张力γcmc随吸附量减小而降低,表现出与一般表面活性剂不同的变化趋势.从多支链烷基苯磺酸钠的分子结构特点,解释了随支链烷基碳数增加Γmax和γcmc的变化规律,探讨了分子的独占面积(as)对Γmax及γcmc的影响.     

Influence of demulsifiers of different structures on interfacial dilational properties of an oil-water interface containing surface-active fractions from crude oil

The influences of two commercial demulsifiers that have a straight chain and branch chain, respectively, on the dilational viscoelasticity of an oil-water interfacial film containing surface-active fractions from crude oil were investigated. The branch-chain demulsifier AE-121 could efficiently substitute surface-active fractions of different average molecular weights from the oil-water interface, while straight-chain SP-169 could only efficiently substitute those of large average molecular weight. It was apt to form a mix-adsorption layer with surface-active fractions of small average molecular weight. The results showed that the molecular size (or represented by average molecular weights) of the surface-active fractions was an important factor influencing the reciprocity of demulsifiers and surface-active fractions at the oil-water interface. This effect could be well explained by the difference between sizes of surface-active fraction molecules and vacancies between demulsifier molecules at the interface. The results of SDBS also proved this explanation.     

CuAl2O4 powder synthesis by sol-gel method and its photodegradation property under visible light irradiation

Nanocrystalline spinel CuAl₂O₄ powders were prepared by sol-gel method from nitrate Cu(NO₃)₂·3H₂O, Al(NO₃)₃·9H₂O and complex C₆H₈O₇·H₂O. Sintering was carried out at 400, 500, 600, 700, 800°C respectively for 2 h in air. The XRD patterns started to appear CuAl₂O₄ peaks after sintering of 500°C and consist of only CuAl₂O₄ peaks as spinel crystal after sintering of 700°C. The powders were analyzed by TEM and UV-vis diffuse reflectance spectrum to be round, about 10–30 nm in size and Eg=1.77 eV. Photodegradation property of nanocrystalline CuAl₂O₄ powders was investigated by using methyl orange as model pollutant and mercury lamp (λ>400 nm) as energy source. The results indicated that CuAl₂O₄ powders sintered at 700°C had the excellent visible photocatalytic property. Under the irradiation of visible light, methyl orange could be degraded 97% in 120 min.     

Tuning Ground States of Bis(triarylamine) Dications: From a Closed‐Shell Singlet to a Diradicaloid with an Excited Triplet State

Three bis(triarylamine) dications were isolated by using weakly coordinating anions. Their electronic structures in the ground state were investigated by various experiments in conjunction with theoretical calculations. The ground‐state electronic structures of these species were tunable by substituent effects, with two of them as closed‐shell singlets and one of them as an open‐shell singlet in the solid state. The excited state of the latter is thermally accessible, indicated by EPR and SQUID measurements. The work provides a new and stable diradicaloid structure motif with an excited triplet sate.     

呼出气体酒精含量探测器检定的注意事项

介绍呼出气体酒精含量探测器的工作原理和国家标准对使用探测器的要求,为确保探测器有效准确的量值溯源,采用呼出气体酒精含量探测器自动检测系统进行检定。该系统能够解决标准气体不易保存和定值容易发生改变的难题,同时控制吹气压力,保证探测器采样的一致性,并列举了检定操作时应注意的问题和细节。     

Improved interframe registration based nonuniformity correction for focal plane arrays

In this paper, an improved interframe registration based nonuniformity correction algorithm for focal plane arrays is proposed. The method simultaneously estimates detector parameters and carries out the nonuniformity correction by minimizing the mean square error between the two properly registered image frames. A new masked phase correlation algorithm is introduced to obtain reliable shift estimates in the presence of fixed pattern noise. The use of an outliers exclusion scheme, together with a variable step size strategy, could not only promote the correction precision considerably, but also eliminate ghosting artifacts effectively. The performance of the proposed algorithm is evaluated with clean infrared image sequences with simulated nonuniformity and real pattern noise. We also apply the method to a real-time imaging system to show how effective it is in reducing noise and the ghosting artifacts.     

Polynomial solutions of a nonlinear difference equation

A class of nonlinear difference equations is considered. We show how their polynomial solutions can be computed in a systematic manner.