Pigment identification and decoration analysis of a 5th century Chinese lacquer painting screen: a micro‐Raman and FTIR study

To investigate the pigments and decoration applied to a wood‐based lacquer painting screen from the tomb of Si‐ma Jin‐long, Shanxi Province, central China, made by Chinese craftsmen in the 5th century, a combination of micro‐Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), wavelength dispersive X‐ray fluorescence (WDXRF), and microscopic examination was used. The obtained results are as follows: (1) the black, yellow, and red colors are identified as carbon black, orpiment and realgar, and cinnabar, respectively, by using micro‐Raman spectroscopy. The FTIR result shows that the white pigment filled in the leaves is not lead white, as assumed in the literature, but gypsum. Whether lead white was used at other locations remains unanswered and requires more samples for further work; (2) the thickness of each discernable pigment layer, as observed under the microscope, is approximately equal and the differences among them are small, suggesting a superfine painting skill; besides, a noticeable smooth interface between wood and the red grounding substance indicates that a polishing process might have been applied before the painting; (3) the red background was proved to contain cinnabar, but further FTIR analyses found no evidence for the presence of Chinese wood oil; and (4) the most interesting finding, rarely reported before, is that white grains of different sizes are found in both pigment layers and the grounding substance, which are perhaps an intentional addition. Further, in situ XRF and Raman analyses indicate that they are sourced from hydroxyapatite, coming probably from the intentional addition of animal bone ash to the lacquer. But how such a process could be finished and what purpose it served have not yet been answered. Copyright © 2009 John Wiley & Sons, Ltd.     

Optical properties of AgI/Ag infrared hollow fiber in the visible wavelength region

We report on AgI/Ag infrared hollow fiber with low-loss in visible region. Improved methods of silver plating and iodination were proposed to fabricate the hollow fiber. The surface roughness of the silver layer and the silver iodide layer was reduced by the pretreatment with an SnCl2 solution and low iodination temperature. Losses for the Er:YAG and green laser light were 0.4 and 7dB/m. The loss property of green laser beam was low to deliver a pilot beam for the invisible infrared laser light. Owing to the smooth and uniform AgI film, the loss spectrum of the hollow fiber showed clear interference peaks in the visible region. An empirical formula for AgI material dispersion was derived, which is of special importance for the design of high-performance AgI/Ag hollow fiber.     

诱导空间非相干束匀滑技术的近区特性及改善技术

诱导空间非相干技术是面向激光驱动惯性约束核聚变的一种具有自身独特优势的束匀滑方法.然而直接使用诱导空间非相干方法将引起强烈的近区强度空间调制,这将威胁装置的运行安全,并严重限制装置的最大输出能力.这也是该方法应用于聚变级高功率激光装置的主要技术障碍之一.本文介绍了一种通过双透镜滤波系统对诱导空间非相干束匀滑技术导致的近区空间强度调制进行匀滑的技术.利用该技术可以在保留诱导空间非相干束匀滑方法的先天优势(更好的远区匀滑特性)的前提下,获得均匀、稳定的近区强度分布,从而避免高功率激光系统在使用诱导空间非相干束匀滑技术时,因为近区强度不均匀、不稳定导致的器件损伤及输出能力受限.在理论建模和数值分析的基础上,以近区调制度、软化因子和透过率为主要评价指标,对比分析了方形、圆形、高斯型等3种滤波孔在不同尺寸下的近区输出效果,最终给出了一种典型的优化结果:16×16诱导空间非相干分割数、0.8倍衍射极限宽度、方形小孔.此时近区强度分布均匀,同时保证了较好的远区匀滑效果和高的能量利用率.在此基础上,针对装置的实际应用情况,进一步分析了准直误差对近区强度分布的影响,结果表明准直误差小于0.1倍衍射极限便不会影响输出的近区质量.对诱导空间非相干束匀滑方法所得焦斑的模拟分析表明,滤波系统的加入能进一步改善焦斑的低频不均匀性.     

转镜式高速扫描相机时间分辨率的测定

 介绍了产生时间分辨率的原因，测量时间分辨率在高速摄影中的作用，前人曾做过的工作，时间分辨率测定的难点；着重介绍了新的测量方法，给出了实际测定的结果。结果表明，对于GSJ型相机，时间分辨率可达8.6 ns，测量的均方根误差为1.1 ns。     

中心波长为28.5nm多层膜镜反射率测量

在“星光-Ⅱ”装置上以类Ne铬x射线激光作为标定源，以平场光栅谱仪为分光元件进行了285nm的Mo/Si多层膜反射镜效率测量.介绍了实验方法，给出了实验结果，本次研制的两块多层膜镜反射率分别为31%和9.6%. 关键词： x射线多层膜反射镜 反射率测量 x射线激光     

Mg掺杂PST薄膜的溶胶-凝胶法制备及晶相形成研究

利用溶胶-凝胶法成功制备了Mg掺杂Pb_0.4Sr_0.6Mg_xTi< sub>1-xO_3-x薄膜，利用x射线衍射仪对薄膜的物相和结构进行了分析， 用扫描电子显微镜对薄膜的形貌和断面等进行了观察.研究结果表明，薄膜以立方钙钛矿为 晶相，薄膜中晶相以团聚状颗粒存在，晶相含量受热处理条件和Mg的掺杂量所控制.Mg掺杂 对Pb_0.4Sr_0.6Mg_xTi_1-xO_3-x 薄膜晶相含量的影响与钙钛矿中的氧空位缺陷相关.在一定的掺杂范围内，由掺杂引起晶相 的晶格畸变较小时，体系掺Mg平衡了晶体内本征氧空位引入的电荷不平衡，使晶相更为稳定 ，析晶能力提高，晶体形成量随掺杂浓度的提高而提高.当掺杂浓度达到一定量时， 随着Mg 掺杂浓度增加，一方面使形成晶体时杂质浓度增加造成参与形成晶相的组成含量下降，另一 方面使进入钙钛矿结构的Mg增加，氧空位大量增加使畸变程度提高，形成的晶相不稳定，析 晶能力下降，晶体含量随掺杂Mg浓度的增加而不增反降.在相同条件下制备的Pb_{0.4Sr0.6MgxTi1-xO3-x薄膜中Mg掺量约为 x=0.01时，得到的钙钛矿相含量最高，本征氧缺陷所带入的正电荷和Mg引入时带入的负电荷 间达到平衡.此外，Mg的掺入还影响到析晶与热处理过程之间的关系.在高Mg掺量范围，Mg含 量越高，形成的晶相越不稳定，热处理时间越长，使热处理过程中分解的晶相量越多，随Mg 掺量越高和热处理时间越长，薄膜中晶相含量越低. 关键词： 溶胶-凝胶法 PST薄膜 Mg掺杂 晶相形成}     

Isotropic ferromagnetic resonance field shift in as-prepared permalloy/FeMn bilayers

Exchange-coupled wedged-permalloy (Py)/FeMn bilayers are studied by ferromagnetic resonance (FMR) technique at room temperature. In comparison, Py single layer films were also made. For Py single layer films and Py/FeMn bilayers, only one uniform resonance peak was observed at high magnetic fields, indicating no interfacial diffusion at the Py/FeMn and Py/Cu interfaces. Negative isotropic in-plane resonance field does exist in Py/FeMn bilayers and its magnitude increases with decreasing Py layer thickness. In order to explain above phenomena, interfacial perpendicular anisotropy must be considered simultaneously, in addition to irreversible rotation of spins in FeMn layers. This is because the perpendicular resonance field of the bilayers is larger than that of Py single layer films.     

余弦二值编码纯相位全息图的数字微镜器件显示

分析了采用错误减算法的迭代过程,在已知物波函数傅里叶谱的振幅和物波函数振幅的情况下恢复出纯相位的物波函数,最大限度地保留物波的振幅及相位信息.提出采用余弦二值编码生成二值全息图,即全息图的透射率函数取0或1.二值全息图通过数字微镜器件全息显示系统进行了重构显示,重构效果很好.理论分析了数字微镜器件的衍射效率,表明其最大衍射效率仅和微镜之间的间隔尺寸与微镜边长之比有关.余弦二值编码方法从理论上消除了零级衍射,可以制作像素较多的全息图.     

Use of elemental size distributions in identifying particle formation modes

The chemical composition of particles generated during pulverized coal combustion is the consequence of their formation processes. This work aims to use the size resolved elemental composition of coal-derived particles to identify their formation modes. A size-classified bituminous coal is burnt in a laboratory drop tube furnace at 1150, 1250, and 1350 °C, respectively. The elemental composition of the size-segregated particles from coal combustion is analyzed and the total mass fraction size distributions of Si and Al are obtained. Three particle formation modes are observed in these distribution profiles. The coarse mode has the highest value of the total mass fraction of Si and Al while the ultrafine mode has the lowest one. The total mass fraction of Si and Al in these two modes is nearly independent of particle size. It is believed that the coarse mode is formed by the mineral coalescence mechanism and the ultrafine mode by the vaporization–condensation mechanism. The difference in the total mass fraction of Si and Al between the central mode and the other two indicates that the central mode is formed by different mechanisms. Based on the observation that the total mass fraction of Si and Al in this mode increases with increasing particle size, heterogeneous condensation of vaporized species on existing fine residual ash particles is proposed to account for the formation of these particles. The study of the elemental composition of the three modes represented in five categories verifies the proposed formation mechanisms for them to some extent.     

硫化砷非晶态波导光阻断效应的机理研究

在实验研究了As₂S₈和掺杂As₂S₈薄膜波导光阻断效应的基础上,讨论了反常电子组态的形成机理和转移机理,提出了光阻断效应切断过程和回复过程的动力学模型,数值分析结果与实验数据十分符合,理论预期与实验现象一致,表明该模型抓住了光阻断效应的基本特征,揭示了过程本质,反映了实验现象的内在机理. 关键词： 光波导技术 硫属化合物玻璃 光阻断效应 动力学模型