Effects of annealing on luminescence efficiency of large-size YAG:Ce crystal grown by temperature gradient techniques

<正>YAG:Ce crystal with a diameter of 110 mm is successfully grown by the temperature gradient technique (TGT).The effects of annealing on the luminescence efficiency of YAG:Ce crystal are investigated,and the optimal annealing temperature and atmosphere are obtained.The mechanism of variation behavior of the luminescence efficiency of YAG:Ce under different annealing conditions is discussed and some details on the luminescence associated with color centers are analyzed.     

A robust photometric calibration framework for projector-camera display system

A novel photometric calibration framework is presented for a projector-camera （ProCam） display system, which is currently under booming development. Firstly, a piecewise bilinear model and five 5-ary color coding images are used to construct the homography between the image planes of a projector and a camera. Secondly, a photometric model is proposed to describe the data flow of the ProCam display system for displaying color images on colored surface in a general way. An efficient self-calibration algorithm is correspondingly put forward to recover the model parameters. Aiming to adapt this algorithm to different types of ProCam display system robustly, a 3× 7 masking coupling matrix and a patches image with 1024 color samples are adopted to fit the complex channel interference function of the display system. Finally, the experimental results demonstrate the validity and superiority of this calibration algorithm for the ProCam display system.     

Spectral Characterization of Couplings in a Mixed Optomechanical Model *

Abstract:We study the spectrum of single-photon emission and scattering in a mixed optomechanical model which consists of both linear and quadratic optomechanical interactions. The spectra are calculated based on the exact long-time solutions of the single-photon emission and scattering processes in this system. We find that there exist some phonon sideband peaks in the spectra and there are some sub peaks around the phonon sideband peaks under proper parameter conditions. The correspondence between the spectral features and the optomechanical interactions is confirmed, and the optomechanical coupling strengths can be inferred by analyzing the resonance peaks and dips in the spectra.     

氧等离子体处理对纳米二氧化硅溶胶涂覆高强、高模聚乙烯纤维拉伸性能的影响

基于艾琳方程,提出用于定量分析纤维表面和纳米涂覆层间的纳米界面结构的理论模型.实验结果表明,纤维高分子链段受力塑性变形时,纳米界面结构内纳米微粒阻碍其形貌变化产生热激活体积,该热激活体积是纳米界面结构性能的重要表征;氧等离子体处理对纳米二氧化硅溶胶涂覆高强、高模聚乙烯纤维有增韧作用.由不同处理样品的扫描电子显微镜图片和傅里叶变换红外光谱曲线对比分析可知,经氧等离子体处理纳米二氧化硅溶胶涂覆高强、高模聚乙烯纤维的纳米涂覆层纳米颗粒分布均匀,纳米颗粒还填补纤维表面微观缺陷,活性官能团被引入到纤维表面. 关键词： 激活体积 氧等离子体 高强、高模聚乙烯纤维 纳米界面结构     

Theoretical and experimental investigation of thermal effects in a high power Yb-doped double-clad fiber laser

In this paper, based on the thermal conduction equations and the steady-state rate equations, a theoretical and numerical analysis of thermal effects is investigated for a single end pumped Yb-doped double-clad fiber laser (YDDC). The distributions of signal power and temperature for different pump powers and fiber parameters are compared. According to the results, the parameters of the optical-cavity have been optimized and an effective method has been adopted to reduce the thermal effects in an experimental investigation. As a result, an output power of 621 W has been obtained with a slope efficiency of 78%.     

Optimization of direct modulation rate for circular microlasers by adjusting mode Q factor

Semiconductor microcircular lasers have been investigated as potential light sources for photonic integrated circuits and optical interconnections for more than two decades. However, the direct modulation bandwidths of the circular microlasers remain a challenge, especially when being compared with other microlasers, such as photonic crystal lasers. In this paper, microcircular lasers connected to an output waveguide are investigated for high‐speed direct modulation with optimized mode Q factors. Small signal modulation with a resonance frequency of f_R = 12.5 GHz is realized for a AlGaInAs/InP circular microlaser with a radius of 10 µm at 290 K. Furthermore, clear eye diagrams are observed at 12.5 Gbit/s for a 15‐µm radius circular microlaser with f_R = 6.9 GHz.     

次条纹积分干涉计量

叙述了次条纹积分干涉干时的原理，仅用一幅光载频干涉纹图获取全部位相信息。先用分段积分法求出条纹初始位相，再由最小二乘原理，迭代出信息的位相解。并讨论了条纹位相的算法，误差修正和测量面形的应用。     

纳米材料二氧化锡的制备和激子态光学特性研究

报道纳米材料二氧化锡的制备和室温下激子态光学特征，应用弱量子限域下激子响应模型对结果进行了解释。     

体积相位全息光栅的设计与制备

本文指出全息干版薄膜在曝光后处理过程中的收缩性和折射率变化对制备全息光栅的周期、倾斜度、布喇格入射角及衍射角的影响问题,并根据实验数据对光栅设计进行修正,再结合Kogelnik衍射方程及折射率调制度和曝光量的线性关系,在实验中基本上能准确设计出指定周期、倾斜度和衍射效率的全息光栅。