不依赖于统计模型的手性毛细管电泳分离多指标同时优化

考虑到手性毛细管电泳分离机理的复杂性，提出了不依赖于统计模型的二进制编码遗传算法多目标优化策略。根据实验参数的多少及其重要性，采用均匀设计安排完成初步实验。并用Derringer功效函数作为多指标同时优化的评价指标，以取得较高的分离度和较快分离速度；通过对实验参数给予编码，转化为二进制字符串，根据得到的总功效函数值大小进行遗传算法操作，产生新的一组实验条件。重复上述过程直到得到最佳分离条件为止。此方法成功地应用于华法令对映体的毛细管电泳分离条件优化。     

Hydrogen adsorption on zigzag (8,0) boron nitride nanotubes

The chemical adsorption of H atoms on an (8,0) zigzag boron nitride nanotube is studied using the density functional theory with the supercell method. One to four H atoms per 32 B and 32 N are considered. The results show that H atoms prefer to adsorb on the top sites of adjacent B and N atoms to form an armchair chain along the tube axis. An even-odd oscillation behavior of the adsorption energy of H atoms on the tube is found, and the average adsorption energy of even H atoms is obviously bigger than that of odd H atoms. The results can be understood with the frontier orbital theory. Based on this adsorption behavior, several high-symmetric structures of H adsorbed boron nitride nanotubes with 50% and 100% coverages are studied. The pairs of lines' pattern with 50% coverage has the biggest average adsorption energy per H(2) among the chosen configurations, corresponding to approximately 4 wt % hydrogen storage.     

ToF-SIMS analysis of surface-anchored organometallic clusters

ToF-SIMS analysis of the organometallic cluster Os₃(μ-H)(CO)₁₀(μ-SCH₂CH₂SH) chemically attached onto a silver or gold surface, and of the cluster fragment Os₃(μ-H)(CO)₁₀(μ-OSi) on a silica surface, allows for identification of the surface organometallic species, and also gives information on its reactivity.     

高阻隔材料——偏氯乙烯悬浮共聚树脂

本文介绍偏氯乙烯悬浮共聚树脂的优异阻隔性能、合成配方与工艺。     

磷脂酰胆碱与牛血清白蛋白相互作用的FT-IR研究

利用傅立叶变换红外(FT-IR)和拉曼(FT-Raman)光谱研究了高浓度磷脂酰胆碱(PC)与牛血清白蛋白(BSA)的相互作用,及Eu3＋对该作用的影响.FT-IR结果显示,PC/BSA混合体系中二者的相互作用主要发生在PC头部极性基团,且这一作用随BSA含量的增加而增强,作用后蛋白质二级结构中α螺旋的比例有所增加. FT-Raman光谱说明PC与BSA的相互作用影响磷脂CH链的排列有序程度. PC/BSA/Eu3＋体系的红外光谱显示, Eu3＋与PC的磷氧键发生了强相互作用,并使蛋白α螺旋的比例进一步增加.     

乙苯脱氢铁系催化剂的穆斯堡尔谱研究

用穆斯堡尔法对乙苯脱氢铁系催化剂在反应条件下进行了研究。结果表明,反应前催化剂中的铁主要以α-Fe_2O_3和α-FeOOH的形式存在,在反应中主要组分为Fe_3O_4。用K_2CO_3和α-Fe_2O_3在高温下加热可以生成KFeO_2,后者在室温下很不稳定,在同样条件下很容易转化为Fe_3O_4。但钾的存在可促进催化剂中Fe~(3+)还原为Fe~(2+),有利于电子的交换,对催化活性起着助催作用。     

Novel alginate-poly(L-histidine) microcapsules as drug carriers: in vitro protein release and short term stability

Spherical, smooth-surfaced and mechanically stable alginate-poly(L-histidine) (PLHis) microcapsules with narrow particle size distributions were prepared by incubating calcium alginate beads in aqueous solutions of PLHis. The in vitro release characteristics, drug loading and encapsulation efficiency of the microcapsules were investigated using bovine erythrocytes hemoglobin (Hb) as a model drug. The results showed that the concentration of Ca(2+) ions had a considerable effect on the drug loading, encapsulation efficiency and in vitro release behavior of the microcapsules. When the concentration of CaCl(2) in the PLHis solution was increased from 0 to 3.0% (w/v), the drug loading and encapsulation efficiency decreased significantly from 38.0 to 4.3% and from 92.9 to 8.0%, respectively, while the total cumulative release of Hb from microcapsules in phosphate buffered saline solution (PBS, pH 6.8) decreased from 96.2 to 72.8% in 24 h. No significant protein release was observed during 70 h of incubation in hydrochloric acid solution (pH 1.2). However, under neutral conditions (PBS, pH 6.8), the Hb was completely and stably released within 24-70 h. An explosion test showed that the stability of alginate-PLHis microcapsules depended strongly on the concentration of PLHis and the calcium ions in solution. [Diagram: see text] Microscopy photo of Hb-loaded alginate-PLHis microcapsules.     

二氧化碳同环氧丙烷交替共聚用催化剂的研究

探讨了有机金属催化剂的组成及其对二氧化碳同环氧丙烷交替共聚产物结构的影响,发现二乙基锌—助剂体系的催化活性按如次顺序递降:二乙基锌—连苯三酚>二乙基锌—间苯二酚>二乙基锌—对苯二胺>二乙基锌—亚乙基脲。若用三异丁基铝代替二乙基锌同连苯三酚构成催化剂,则失去对二氧化碳同环氧丙烷交替共聚反应的活性同时,著者发现二乙基锌—二元芳胺催化体系与二乙基锌—二元酚催化体系的催化活性规律完全不同。     

利用差异衍生同步分析醛糖和酮糖

建立了一种可同时对醛、酮糖进行精确定性和定量分析的方法。以肌醇作为内标，用80％乙醇超声提取，利用醋酸酐和HMDS＋TMCS（1：3）进行差异衍生，在EI源下用SIM模式进行GC／MS分析。结果表明：11种标准单糖在1—4mg／L范围内线性良好；仪器检出限：醛糖在8．15—22．4μg／L之间；酮糖为2．32μg／L和3．47μg/L；高、中、低3个量的平均回收率在73．0％-95．7％，相对标准偏差在3．1％-10．0％。对枸杞游离单糖进行测定，各单糖含量分别在0．26—368．6mg／g。该方法弥补了以前单糖分析中的缺陷，对既含有醛糖又含有酮糖的样品可同时进行精确的定性定量分析。