Pulsed microwave-driven argon plasma jet with distinctive plume patterns resonantly excited by surface plasmon polaritons

Atmospheric lower-power pulsed microwave argon cold plasma jets are obtained by using coaxial transmission line resonators in ambient air.The plasma jet plumes are generated at the end of a metal wire placed in the middle of the dielectric tubes.The electromagnetic model analyses and simulation results suggest that the discharges are excited resonantly by the enhanced electric field of surface plasmon polaritons.Moreover,for conquering the defect of atmospheric argon filamentation discharges excited by 2.45-GHz of continued microwave,the distinctive patterns of the plasma jet plumes can be maintained by applying different gas flow rates of argon gas,frequencies of pulsed modulator,duty cycles of pulsed microwave,peak values of input microwave power,and even by using different materials of dielectric tubes.In addition,the emission spectrum,the plume temperature,and other plasma parameters are measured,which shows that the proposed pulsed microwave plasma jets can be adjusted for plasma biomedical applications.     

阻尼最小二乘法用于激光诱导击穿光谱重叠特征谱线分离提取

近年来,激光诱导击穿广谱技术发展迅速。作为一种用于物质成分探测的新技术,它具有简单、快速、无需复杂样品制备、多种元素同时检测等优点,可实现待测样品物质成分现场、在线的检测,在很多领域都极具应用前景。激光诱导击穿光谱特征谱线的分离拟合提取是光谱特征识别与后续元素浓度定量反演研究的基础。为实现激光诱导击穿光谱重叠特征谱线的有效分离拟合提取,采用阻尼最小二乘法,分析并确定了迭代前的初始拟合参数值,实现了在重叠特征谱线情况下对某火力发电厂粉煤灰中的铬元素特征谱线的分离提取。阻尼最小二乘法基于高斯-牛顿迭代,在迭代步长中引入阻尼因子,在迭代的过程中根据每一步迭代后所反馈的信息动态的调整迭代步长,从而有效防止了迭代的发散,保证了迭代的快速收敛,最终使得元素特征谱线拟合提取的效果更佳、所得到的特征谱线强度值更准确。分别采用阻尼最小二乘法和最小二乘法对不同浓度的样品中铬元素特征谱线进行分离拟合提取并给出特征谱线的强度值,作出特征谱线强度值关于元素浓度的定标曲线并对比两种方法所得结果的线性相关性。结果表明,阻尼最小二乘法所得结果的线性相关性更高,该方法稳定、可靠,适用于激光诱导击穿光谱重叠特征谱线的分离拟合提取。     

Bi2S3纳米复合材料的非线性光学性质

利用单光束 Z扫描技术 ,在波长为 1 .0 64μm、脉宽为 38ps条件下测定了不同热处理条件下表面包覆纳米 Bi2 S3 掺杂有机改性硅酸盐材料的三阶光学非线性。结果发现室温下自然干燥的样品和在 N2 气氛下 1 50℃加热处理 2小时后的样品的三阶光学非线性极化系数分别为5.8× 1 0 -1 3 esu和 3.7× 1 0 -1 2 esu。后者的三阶光学非线性极化系数比前者几乎大一个数量级。显然 ,适当的热处理能增强样品的三阶光学非线性。对此现象进行了分析和讨论。     

Sb2O3掺杂对提高PbWO4晶体光学及闪烁性能的作用

采用改进的布里奇曼（Ｂｒｉｄｇｍａｎ）法生长了掺杂Ｓｂ２Ｏ３的ＰｂＷＯ４晶体。基于透射光谱、紫外激发及其发射谱、Ｘ射线激发的发射谱、光输出和辐照损伤待方面的测试,讨论了Ｓｂ２Ｏ３掺杂对提高ＰｂＷＯ４晶体光学及闪烁性能的作用。     

红外凝视传感器定量仿真及模型验证

针对新一代红外凝视成像传感器,依据红外辐射能量传递和转换的物理过程,完成了对传感器各组成单元的物理效应建模.不同于以往成像模型的定性仿真,该模型实现了对系统各模块成像特性的定量描述,综合考虑了传感器的信号传递特性、空间传递特性、空间采样特性和时空噪音特性,构建了较为完善的高仿真度红外成像仿真模型.为验证仿真模型的有效性,搭建了有效性实验验证平台,获取了真实热像仪的性能曲线和输出图像.通过计算和比较仿真模型和真实热像仪性能曲线和输出图像相似程度,定量化评价了模型的仿真度,验证了仿真模型的有效性.     

基于振动弛豫理论提高光抽运太赫兹激光器输出功率的研究

以半经典密度矩阵理论和分子振动弛豫理论为基础,研究添加适当比例缓冲气体与适当减小波导芯径对光抽运太赫兹激光器输出光强的影响.计算结果表明,加入适当比例缓冲气体或适当减小波导的芯径均能提高太赫兹激光的输出光强;同时优化两个参数能进一步提高抽运激光能量转化为太赫兹激光能量的效率,延长工作腔中的有效激活区,延缓抽运饱和效应的出现,提高太赫兹激光输出光强.该研究对提高光抽运太赫兹激光器的能量转化效率、提高光抽运太赫兹激光器的输出功率及实现光抽运太赫兹激光器的小型化有重要的指导意义.     

通信波段硅基气孔光子晶体的带隙特性及其物理模型研究

用平面波展开法对硅背景下的通信波段不同晶格类型和气孔形状光子晶体的能带结构进行数值计算与分析,提出了相应的物理模型.结果表明:利用光子受限效应和晶格对称性效应可以有效地调控光子带隙.随光子晶体填充率的增加,其约束光子的能力增强,光子带隙在一定范围内展宽且其中心频率蓝移;带隙随晶格对称性增加而变宽.对基元形状和旋转角度的研究发现,光子带隙随基元旋转角度变化具有周期性和对称性,表现出各向异性,由此优化出对应的不同晶格的最佳谐振腔型结构.     

超宽带TEM喇叭天线优化设计与实验

针对用于成像雷达系统的超宽带TEM喇叭天线进行了优化设计,兼顾辐射性能、馈入反射和小尺寸条件,采用平滑渐变结构和加载技术代替原设计,增加了低频电流的回流通道,从而改善了天线的低频特性,增强了其定向辐射能力。在理论分析的基础上对其进行了仿真,并按照仿真结果实际制作了一副天线,对天线进行了测试。仿真与实测结果表明:在电压驻波系数小于2时,该天线具有11∶1的阻抗带宽,较强的辐射能力和良好的定性辐射特性,能够满足雷达系统的需求。     

Hole arrayed metal-insulator-metal structure for surface enhanced Raman scattering by self-assembling polystyrene spheres

A fabrication process based on the self-assembling polystyrene spheres is proposed to obtain hole arrayed metal-insulator-metal （HA-MIM） structure for surface enhanced Raman scattering （SERS）. The localized field enhancement aroused by the gap resonance in the HA-MIM structure is analyzed by finite-different time domain （FDTD） method. With reference to the theory result, the structure is experimentally fabricated and the Raman scattering spectrum of rhodamine 6G （R6G） is measured by a miniaturized Raman spectrometer. The results shows that the enhancement factor is 3.85 times higher than the control sample with single layered metal hole array. The fabrication process to obtain the HA-MIM SERS substrate is reproducible, fast, large area and low cost.     

Projectile electron loss in collisions of light charged ions with helium

We investigate the single-electron loss processes of light charged ions （Li^1＋,2＋, C^2＋,3＋,5＋, and O^2＋,3＋） in collisions with helium. To better understand the experimental results, we propose a theoretical model to calculate the cross section of projectile electron loss. In this model, an ionization radius of the incident ion was defined under the classical over-barrier model, and we developed ＂strings＂ to explain the processes of projectile electron loss, which is similar with the molecular over-barrier model. Theoretical calculations are in good agreement with the experimental results for the cross section of single-electron loss and the ratio of double-to-single ionization of helium associated with one-electron loss.