A new solution of reducing polymer optical fiber losses

Polymethyl methacrylate (PMMA) is one of the most commonly used optical materials. However, the application of it in the area of optical communication is strongly limited by the intrinsic absorption loss of carbon-hydrogen stretching vibration. In this paper, we present a method to solve the problem by adopting the hollow-core fibers with cobweb cladding structure. The fibers use a single dielectric material and may solve the problem of structural support. Thus the feasibility of the “OmniGuide” fibers is improved, while a series of advantages of the “OmniGuide” hollow-core fiber are retained. It is promising that a fiber with low transmission loss, high bandwidth, large-core, and low costs can be designed and fabricated using PMMA. At the same time, a very broad range of the wavelengths (from visible to near infrared region, for instance, wavelengths at 0.65-1.12 μm, and even 1.30 μm, 1.54 μm and their neighbors) may be adopted for signal wavelength.     

Fabrication of Ni-Co binary oxide/reduced graphene oxide composite with high capacitance and cyclicity as efficient electrode for supercapacitors

Nickel-cobalt binary oxide/reduced graphene oxide (G-NCO) composite with high capacitance is synthesized via a mild method for electrochemical capacitors. G-NCO takes advantages of reduced graphene oxide (RGO) and nickel-cobalt binary oxide. As an appropriate matrix, RGO is beneficial to form homogeneous structure and improve the electron transport ability. The binary oxide owns more active sites than those of nickel oxide and cobalt oxide to promote the redox reaction. Attributed to the well crystallinity, homogeneous structure, increased active sites, and improved charge transfer property, the G-NCO composite exhibits highly enhanced electrochemical performance compared with G-NiO and G-Co₃O₄ composites. The specific capacitance of the G-NCO composite is about 1750 F g^?1 at 1 A g^?1 together with capacitance retention of 79 % (900/1138 F g^?1) over 10,000 cycles at 4 A g^?1. To research its practical application, an asymmetric supercapacitor with G-NCO as positive electrode and activated carbon as negative electrode was fabricated. The asymmetric device exhibits a prominent energy density of 37.7 Wh kg^?1 at a power density of 800 W kg^?1. The modified G-NCO composite shows great potential for high-capacity energy storage.     

The effects of Si3N4 interlayer on the thermal stability and hardness of Ti/TiNx (x = 0.5-1) nanolayered coatings

The polycrystalline Ti/TiN_x multilayer films were deposited by magnetron sputtering, and the as-deposited multilayer coatings were annealed at 500-800 °C for 2-4 h in vacuum. We investigated the effects of annealing temperature and annealing time on the microstructural, interfacial, and mechanical properties of the polycrystalline Ti/TiN_x multilayer films. It was found that the hardness increased with annealing temperature. This hardness enhancement was probably caused by the preferred crystalline orientation TiN(1 1 1). The X-ray reflectivity measurements showed that the layer structure of the coatings could be maintained after annealing at 500 °C and the addition of the Si₃N₄ interlayer to Ti/TiN_x multilayer could improve the thermal stability to 800 °C.     

Searching for high-K isomers in the proton-rich A～80 mass region

Configuration-constrained potential-energy-surface calculations have been performed to investigate the K isomerism in the proton-rich A～ 80 mass region. An abundance of high-K states are predicted. These high-K states arise from two and four-quasi-particle excitations, with K~π= 8~+ and K~π= 16~+, respectively. Their excitation energies are comparatively low, making them good candidates for long-lived isomers. Since most nuclei under study are prolate spheroids in their ground states, the oblate shapes of the predicted high-K states may indicate a combination of K isomerism and shape isomerism.     

Studies on Fast Algorithm for the Scattering of a Large Array of Waveguide-Fed Wide-Slot Antennas in Millimeter Wave Region

We present an effective numerical technique to characterize the scattering of wide-slot antennas fed by waveguides with arbitrary terminations in terms of the method of moment (MoM) and the mixed potential integral equation (MPIE). In particular, the precorrected-fast Fourier transform (P-FFT) eliminates the need to generate and store the usual square impedance matrix andthus leads to speed up the matrix-vector multiplication in the resultant system. This property makes the Rao-Wilton-Glisson (RWG) functions to be useful in simulating electrically large-scale problems. In addition, the scattering from the finite ground surfaces is accounted for in the total scattered field by using the method of equivalent edge currents. The numerical results are presented and compared with both the traditional method of moment results obtained using the entire-domain basis functions and the experimental results, to demonstrate the proposed method to be a good candidate for study on the scattering of arbitrary wide-slot large array.     

Photoelectron angular distributions from above threshold ionization of hydrogen atoms in strong laser fields

We apply a scattering theory of nonperturbative quantum electrodynamics to study the photoelectron angular distributions (PADs) of a hydrogen atom irradiated by linearly polarized laser light. The calculated PADs show main lobes and jetlike structure. Previous experimental studies reveal that in a set of above-threshold-ionization peaks when the absorbed-photon number increases by one, the jet number also increases by one. Our study confirms this experimental observation. Our calculations further predict that in some cases three more jets may appear with just one-more-photon absorption. With consideration of laser-frequency change, one less jet may also appear with one-more-photon absorption. The jetlike structure of PADs is due to the maxima of generalized phased Bessel functions, not an indication of the quantum number of photoelectron angular momentum states.     

基于微光机电系统的微光学自适应微镜的研究

提出了一种利用热应力改变镜面曲率的可调焦微光学自适应微镜。与传统自适应微镜相比,采用该原理制作的微镜具有驱动电压低和驱动力较大的优点,而且制作简单。以硅为基底进行了表面热氧化、光刻显影、HF酸刻蚀、KOH湿法刻蚀,溅射铝膜等微加工工艺的研究,获得硅铝双金属可调焦微反射镜4×4阵列,单元尺寸3 mm×3 mm,单晶硅基底厚60μm,硅表面溅射的铝膜厚150 nm。该微镜的镜面填充率为100%,可变形镜面占总镜面面积的79%。利用激光波面干涉仪对可调焦微反射镜的动态性能进行了测试。实验表明,该微镜可产生单向连续变形,最大变形量15.8μm,非线性滞后27%,工作电压0~2.5V,可调焦范围∞~0.036 m。     

Influence of annealing treatment on as-grown Ib-type diamond crystal at a high temperature and high pressure

In this paper,we report on the influence of annealing treatment on as-grown Ib-type diamond crystal under high pressure and high temperature in a china-type cubic anvil high-pressure apparatus.Experiments are carried out at a pressure of 7.0 GPa and temperatures ranging from 1700 C to 1900 C for 1 h.Annealing treatment of the diamond crystal shows that the aggregation rate constant of nitrogen atoms in the as-grown Ib-type diamond crystal strongly depends on diamond morphology and annealing temperature.The aggregation rate constant of nitrogen remarkably increases with the increase of annealing temperature and its value in octahedral diamond is much higher than that in cubic diamond annealed at the same temperature.The colour of octahedral diamond crystal is obviously reduced from yellow to nearly colorless after annealing treatment for 1 h at 1900 C,which is induced by nitrogen aggregation in a diamond lattice.The extent of nitrogen aggregation in an annealed diamond could approach approximately 98% indicated from the infrared absorption spectra.The micro-Raman spectrum reveals that the annealing treatment can improve the crystalline quality of Ib-type diamond characterized by a half width at full maximum at first order Raman peak,and therefore the annealed diamond crystals exhibit nearly the same properties as the natural IaA-type diamond stones of high quality in the Raman measurements.     

Enhanced luminescence of Tb by efficient energy transfer from Ce in Sr2B5O9Cl host

Ce³⁺ and Tb³⁺ co-doped Sr₂B₅O₉Cl phosphors with intense green emission were prepared by the conventional high-temperature solid-state reaction technique. A broad band centered at about 315 nm was found in phosphor Sr₂B₅O₉Cl: Ce³⁺, Tb³⁺ excitation spectrum, which was attributed to the 4f-5d transition of Ce³⁺. The typical sharp line emissions ranging from 450 to 650 nm were originated from the ⁵D₄ → ⁷F_J (J = 6, 5, 4, 3) transitions of Tb³⁺ ions. The photoluminescence (PL) intensity of green emission from Tb³⁺ was enhanced remarkably by co-doping Ce³⁺ in the Tb³⁺ solely doped Sr₂B₅O₉Cl phosphor because of the dipole-dipole mechanism resonant energy transfer from Ce³⁺ to Tb³⁺ ions. The energy transfer process was investigated in detail. In light of the energy transfer principles, the optimal composition of phosphor with the maximum green light output was established to be Sr_1.64Ce_0.08Tb_0.1Li_0.18B₅O₉Cl by the appropriate adjustment of dopant concentrations. The PL intensity of Tb³⁺ in the phosphor was enhanced about 40 times than that of the Tb³⁺ single doped phosphor under the excitation of their optimal excitation wavelengths.