A modified procedure for synthesis of the side chain of ceftazidime-activated thioester

A modified procedure for synthesis of the side chain of ceftazidime-activated thioester has been established. This key intermediate of ceftazidime was obtained by a more eco-friendly process than conventional methods, and the yield was much higher (up to 92.4 %). It was found that different organic bases (triethylamine or pyridine) used in this reaction had different effects. The reaction conditions were also optimized to make the route more competitive and suitable for large-scale industrial production.     

Synthesis and characterization of polythiophene block copolymer and fullerene derivative capable of “three‐point” complementary hydrogen bonding interactions and their application in bulk‐heterojunction solar cells

We report the synthesis and characterization of a polythiophene block copolymer (P4) selectively functionalized with diaminopyrimidine moieties and a thymine tethered fullerene derivative (F1). Self‐assembly between P4 and F1 through “three‐point” complementary hydrogen bonding is studied by ¹H NMR spectroscopy and differential scanning calorimetry. A large Stern‐Volmer constant (K_SV) of 1.2 × 10⁵ M^?1 is observed from fluorescence quenching experiments, revealing strong complexation between these two components. Solar cells employing P4 and F1 at different weight ratios as active layers are fabricated and tested; corresponding thin film morphologies are studied in detail by optical imaging and atomic force microscopy. Correlations between polymer complex structures, film morphologies, and device performance are discussed. Thermal stability of benchmark poly(3‐hexylthiophene) bulk heterojunction solar cells is found to be improved by the addition of a few weight percent of P4/F1 complexes as compatibilizers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3339–3350     

An optical study of the D-D neutron irradiation-induced defects in Co-and Cu-doped ZnO wafers

Room-temperature photoluminescence and optical transmittance spectroscopy of Co-doped(1×1014,5×1016,and 1×1017cm-2) and Cu-doped(5×1016cm-2) ZnO wafers irradiated by D-D neutrons(fluence of 2.9×1010 cm-2) have been investigated.After irradiation,the Co or Cu metal and oxide clusters in doped ZnO wafers are dissolved,and the wu¨rtzite structure of ZnO substrate for each sample remains unchanged and keeps in high c-axis preferential orientation.The degree of irradiation-induced crystal disorder reflected from the absorption band tail parameter(E0) is far greater for doped ZnO than the undoped one.Under the same doping concentration,the Cu-doped ZnO wafer has much higher irradiation-induced disorder than the Co-doped one.Photoluminescence measurements indicate that the introduction rate of both the zinc vacancy and the zinc interstitial is much higher for the doped ZnO wafer with a high doping level than the undoped one.In addition,both crystal lattice distortion and defect complexes are suggested to be formed in doped ZnO wafers.Consequently,the Co-or Cu-doped ZnO wafer(especially with a high doping level) exhibits very low radiation hardness compared with the undoped one,and the Cu-doped ZnO wafer is much less radiation-hard than the Co-doped one.     

Cooling-induced increase of methane cluster size investigated under a Coulomb explosion scheme

In this letter, we discuss the increase in the average cluster size by lowering the stagnation temperature of the methane （CH4） gas. The Coulomb explosion experiments are conducted to estimate the cluster size and the size distribution. The average CH4 cluster sizes Nay of 6 230 and 6 580 are acquired with the source conditions of 30 bars at 240 K and 60 bars at 296 K, respectively. Empirical estimation suggests a five-fold increase in the average size of the CH4 clusters at 240 K compared with that at room temperature under a backing pressure of 30 bars. A strong nonlinear Hagena parameter relation （Г^＊∝ T0^-3.3） for the CH4 clusters is revealed. The results may be favorable for the production of large-sized clusters by using gases at low temperature and high back pressures.     

Effect of aluminum co-doping on the formation of Yb2+ in Ytterbium-doped high silica glass

Yb3+ singly doped and Yb3+/Al3+ co-doped high silica glass samples are prepared,and their luminescent properties are investigated.Al3+ is considered as a beneficial activator for Yb3+-doped glass.However,the experimental result shows that the addition of Al3+ results in the transformation from Yb3+ to Yb2+ and the improvement in the photon luminescence of Yb2+.These characteristics indicate the role of Al3+ in Yb3+-doped glass.     

An analog of double electromagnetically induced transparency with extremely high group indexes

An asymmetric metamaterial exhibiting an analog of double electromagnetically induced transparency(EIT) in the middle-infrared region is reported.The metamaterial consists of two-layered arrays of Ushaped rings embedded in a medium,with the lower layer rotated by 90°.Our simulations demonstrate that both maximum group indexes are extremely high at the two EIT-like positions.The group index reaches about thrice the currently reported maximum value at the high-frequency EIT-like position.The transmittance at the two transparency positions also possesses extremely high Q factors,which is conducive to controlling the propagation of electromagnetic waves.     

Echelle dif fraction grating based high-resolution spectrometer-on-chip on SiON waveguide platform

An echelle diffraction grating based high-resolution spectrometer-on-chip on silicon oxynitride (SiON) waveguide platform operated at a wavelength range of 850 nm is demonstrated. The chip comprises 120 output waveguides with 0.25-nm wavelength channel spacing and has a size of only 11 × 6 (mm). The experimental results show that the insertion loss is-14 dB, the measured adjacent channel crosstalk is less than -25 dB, the 3 dB channel bandwidth is < 0.1 nm, and the channel non-uniformity is 3 dB for 56 channels with a wavelength ranging from 838 to 852 nm.     

On-line writing identical and weak fiber Bragg grating arrays

We investigate the on-line writing identical fiber Bragg grating (FBG) arrays using the phase mask technique. Given the limitation of laser power, the energy density uniformity and the horizontal width of the writing spot cannot be further optimized. The results show that the FBG arrays obtained in the optimal process (drawing speed of 12 ± 0.15 m/min and average tension of 38.2 g) have a central wavelength bandwidth of less than 0.1 nm and an average reflectivity of 0.26%. Thus, the phase mask method is a promising alternative for on-line writing identical FBG arrays.On-line writing identical and weak fiber Bragg grating arrays.