Two color up-conversion emissions of Er<Superscript>3+</Superscript>-doped Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanopowders prepared by non-aqueous sol-gel method

Er³⁺-doped Al₂O₃ nanopowders have been prepared by the non-aqueous sol-gel method using the aluminum isopropoxide as precursor, acetylacetone as a chelating agent, nitric acid as a catalyzer, and hydrated erbium nitrate as a dopant under isopropanol environment. The different phase structure, including three crystalline types of (Al, Er)₂O₃ phases, α, γ, θ, and an Er–Al–O stoichiometric compound phase, Al₁₀Er₆O₂₄, was observed for the 0.01–0.5 mol% Er³⁺-doped Al₂O₃ nanopowders at the sintering temperature of 1,000 °C. The green and red up-conversion emissions centered at about 523, 545 and 660 nm, corresponding respectively to the ²H_11/2, ⁴S_3/2→⁴I_15/2 and ⁴F_9/2→⁴I_15/2 transitions of Er³⁺, were detected by a 978 nm semiconductor laser diodes excitation. With increasing Er³⁺ doping concentration from 0.01 to 0.1 mol%, the intensity of the green and red emissions increased with a decrease of the intensity ratio of the green to red emission. When the Er³⁺ doping concentration rose to 5 mol%, the intensity of the green and red emissions decreased with an increase of their intensity ratio. The maximum intensity of both the green and red emissions with the minimum of intensity ratio was obtained, respectively, for the 0.1 mol% Er³⁺-doped Al₂O₃ nanopowders composed of a single α-(Al,Er)₂O₃ phase. The intensity ratio of the green emission at 523 and 545 nm increased monotonously for all Er³⁺ doping concentrations. The two-photon absorption up-conversion process was involved in the green and red up-conversion emissions of the Er³⁺-doped Al₂O₃ nanopowders.     

Anion and Additive Effects on the Structure of Mercury(II) Halides Complexes with Tripodal Ligand

The metal complexes [Hg₂(tbim)₂Br₄]·2DMF ( 1 ) and [Hg₂(tbim)I₄]·1.5DMF ( 2 ) were prepared by reactions of 1,3,5‐tris(benzimidazol‐1‐ylmethyl)‐2,4,6‐trimethylbenzene (tbim) with HgBr₂, HgI₂, respectively, and [Hg₂(tbim)I₄]·0.5(FeCp₂)·H₂O ( 3 ) was obtained by the same method with addition of ferrocene (FeCp₂) as additive. Their structures were determined by X‐ray crystallographic analyses. Complex 1 has a macrocyclic binuclear structure with one benzimidazole arm of the ligand free of coordination and the binuclear units are further connected by C‐H···N hydrogen bonds to give an infinite zigzag chain. Complexes 2 and 3 have a 2D network structure in which tbim serves as a tridentate ligand. The results showed that the halides of bromide and iodide have remarkable impact on the structure of the complexes. The FeCp₂ molecules are trapped in the voids of framework 3 .     

Electrochemical Study of Indium in a Water‐Stable 1‐Ethyl‐3‐Methylimidazolium Chloride/Tetrafluoroborate Room Temperature Ionic Liquid

The electrochemistry of indium species was investigated at glassy carbon, tungsten and nickel electrodes in a basic 1‐ethyl‐3‐methylimidazolium chloride/tetrafluoroborate ionic liquid. Amperometric titration experiments suggest that In(III) chloride is complexed as [InCl₅]^2? in this ionic liquid. The electrochemical reduction of [InCl₅]^2? to indium metal is preceded by overpotential driven nucleations. The effective anodic dissolution of indium to indium(III) requires, however, the presence of sufficient chloride ions at the electrode surface. The electrodeposition of indium at glassy carbon and tungsten electrodes proceeds via three‐dimensional instantaneous nucleation with diffusion‐controlled growth of the nuclei. At the nickel electrode, the deposition proceeds via three‐dimensional progressive nucleation with diffusion‐controlled growth of the nuclei. Raising the deposition temperature decreases the average radius of the individual nuclei, r. Scanning electron microscopic and x‐ray diffraction data indicated that bulk crystalline indium electrodeposits could be prepared on nickel substrates within a temperature range between 30 and 120 °C.     

Efficient excitation energy transfer in long meso-meso linked Zn(II) porphyrin arrays bearing a 5,15-bisphenylethynylated Zn(II) porphyrin acceptor

Electronically coupled porphyrin arrays are suitable for artificial light harvesting antenna in light of a large absorption cross-section and fast excitation energy transfer (EET). Along this line, an artificial energy transfer model system has been synthesized, comprising of an energy donating meso-meso linked Zn(II) porphyrin array and an energy accepting 5,15-bisphenylethynylated Zn(II) porphyrin linked via a 1,4-phenylene spacer. This includes an increasing number of porphyrins in the meso-meso linked Zn(II) porphyrin array, 1, 2, 3, 6, 12, and 24 (Z1A, Z2A, Z3A, Z6A, Z12A, and Z24A). The intramolecular singlet-singlet EET processes have been examined by means of the steady-state and time-resolved spectroscopic techniques. The steady-state fluorescence comes only from the acceptor moiety in Z1A-Z12A, indicating nearly the quantitative EET. In Z24A that has a molecular length of ca. 217 A, the fluorescence comes largely from the acceptor moiety but partly from the long donor array, indicating that the intramolecular EET is not quantitative. The transient absorption spectroscopy has provided the EET rates in real time scale: (2.5 ps)(-1) for Z1A, (3.3 ps)(-1) for Z2A, (5.5 ps)(-1) for Z3A, (21 ps)(-1) for Z6A, (63 ps)(-1) for Z12A, and (108 ps)(-1) for Z24A. These results have been well explained by a revised F?rster equation (Sumi formula), which takes into account an exciton extending coherently over several porphyrin pigments in the donor array, whose length is not much shorter than the average donor-acceptor distance. Advantages of such strongly coupled porphyrin arrays in light harvesting and transmission are emphasized in terms of fast EET and a large absorption cross-section for incident light.     

Synthesis, structure, and fluorescence of the novel cadmium(II)-trimesate coordination polymers with different coordination architectures

Three novel complexes, Cd3tma2*13H2O (1), Cd3tma2*dabco*2H2O (2), and Cd3Htma3*8H2O (3) (tma = trimesate), of cadmium(II)-trimesate coordination polymers are obtained from hydrothermal reaction. 1 (C18H32O25Cd3) crystallizes in the monoclinic C2/c space group [a = 18.985(2) A, b = 7.3872(6) A, c = 20.432(2) A, = 97.1660(10), and Z = 4]. 2 (C24H22N2O14Cd3) crystallizes in the monoclinic P2(1)/c space group [a = 10.1323(2) A, b = 19.5669(5) A, c = 13.15880(10) A, = 108.9810(10), and Z = 4]. 3 (C27H28O26Cd3) belongs to the trigonal P31c space group [a = 15.7547(3) A, b = 15.7547(3) A, c = 7.93160(10) A, and Z = 2]. The Cd(II) centers in the three complexes are bridged by tma ligands in the coordination fashion of unidentate, bridging unidentate, bidentate, chelating bis-bidentate, chelating/bridging bis-bidentate, or chelating/bridging bidentate to form the T-shaped molecular bilayer motif for 1, chicken-wire-like motif for 2, and honeycomb-like porous structure for 3, respectively, in which the T-shaped molecular bilayer motif and chicken-wire-like motif are further interlinked in interdigitating or alternating fashion to construct the different coordination architectures. These three complexes exhibit strong fluorescent emission bands at 355 nm (lambda(ex) = 220 nm) for 1, 437 nm (lambda(ex) = 365 nm) for 2, and 353 nm (lambda(ex) = 218 nm) for 3 in the solid state at room temperature.     

Mesoscopic simulation of the aggregation behavior of fluorinated surfactant in aqueous solution

The aggregation behavior of fluorinated surfactant in aqueous solution was investigated using dissipative particle dynamics (DPD) simulation method. Simulation results show that fluorinated surfactants behave mainly as their hydrocarbon analogues, having similar sequences of phases and aggregate structures, which are capable of building micelle, hexagonal phase and lamellar phase. But fluorinated surfactants also show interesting differences from hydrocarbon analogues, which can easily form hexagonal and lamellar structures with comparative little curvature. They can also form ellipsoid or rod-like micelles even in very low concentrations instead of spheroid ones. The dynamic aggregation behavior of fluorinated surfactants, as well as the comparison with hydrogenated ones, was also investigated.     

The Color Reaction of Mercury(II) with the New Reagent 2-Methylthiophenyldiazoaminoazobenzene and Its Application

A new and very sensitive and selective chromogenic reagent, 2-methylthiophenyldiazoaminoa-zobenzene (MTDAA), was synthesized and studied in detail for the determination of trace mercury(II) in water samples. The method is based on the color reaction between MTDAA and mercury(II). It was found that mercury(II) reacts with MTDAA in Na₂B₄O₇-NaOH buffer solution (pH = 10.0) to form 1 : 2 red complexes; these show maximum absorption at 520 nm. Beer’s law is obeyed in 0–15 µg of mercury(II) in 25 mL of solution. The apparent molar absorptivity of the complex is 1.33 × 10⁵ L/(mol cm); its limit of quantification, limit of detection, and relative standard deviation are 0.75 ng/mL, 0.27 ng/mL, and 1.0%, respectively, giving better sensitivity. The influence of the reaction variables and the effect of interfering ions are reported; most of the metal ions in water samples can be tolerated in considerable amounts. Only a few ions can interfere with the determination of trace mercury(II), but these can be eliminated by prior extraction. The proposed method is sensitive, simple, and rapid. It has been applied to the determination of trace mercury(II) in water samples with satisfactory results.__________From Zhurnal Analiticheskoi Khimii, Vol. 60, No. 7, 2005, pp. 703–706.Original English Text Copyright © 2005 by Guo, Din, Tian, Liu, Chang, Meng.The text was submitted by the authors in English.     

Two novel procedures of preparation for [Tc(CO)<Subscript>2</Subscript>(NO)]<Superscript>2+</Superscript>labeled by EHIDA and its biodistribution

To develop potential new Tc radiopharmaceuticals, a novel compound [^99mTc(CO)₂(NO)(EHIDA)]⁰ (EHIDA: 2,6-diethylphenylcarbamoylmethyliminodiacetic acid) has been prepared by reacting [^99mTc(CO)₃)(EHIDA)]⁻ with NOBF₄ both in water and acetonitrile. The conversion of [^99mTc(CO)₃)(EHIDA)]⁻ to [^99mTc(CO)₂(NO)(EHIDA)]⁰ was supported by TLC, HPLC and eletrophoresis. The radiochemical purity (more than 99%) was proved by TLC and HPLC. The biodistribution in mice demonstrated that [Tc(CO)₂(NO)(EHIDA)]⁰ showed higher uptake in blood, kidney and lung (15 min, blood: 19.24±2.95; kidney: 13.61±3.49; lung: 10.81±1.09.) but a lower uptake in liver (15 min, 5.73±0.74). The slower clearances (120 min, blood: 12.75±1.34; kidney: 13.61±3.49) from blood and kidney were also found. This research describes two methods for the conversion of [^99mTc(CO)₃]⁺ into [^99mTc(CO)₂)(NO)]²⁺ by using NOBF₄ as the source of NO⁺ both in organic solvent and water. The latter method offers the possibility to introduce the NO-group in high yield in water.     

Identification of differentially expressed proteins between human hepatoma and normal liver cell lines by two-dimensional electrophoresis and liquid chromatography-ion trap mass spectrometry

In the previous study, the proteomes of the human hepatoma cell line BEL-7404 and the normal human liver cell line L-02 were separated by high resolution two-dimensional electrophoresis (2-DE). Image analysis revealed that 99 protein spots showed quantitative and qualitative variations that were significant (P < 0.01) and reproducible. Here we report the identification results of some of these protein spots. Protein spots excised from 2-D gels were subjected to in-gel digestion with trypsin, and the resulting peptides were measured by microbore high performance liquid chromatography - ion trap - mass spectrometry (LC-IT-MS) to obtain the tandem mass (MS/MS) spectra. Twelve protein spots were identified with high confidence using SEQUEST with uninterpreted MS/MS raw data. Besides inosine-5'-monophosphate dehydrogenase 2, heat shock 27 kDa protein, calreticulin and calmodulin, whose expression was elevated in hepatoma cells, glutathione-S-transferase P was identified from hepatoma cells in which its level was 18-fold higher compared to human liver cells. Two spots were identified as the homologs of reticulocalbin for the first time in hepatoma cells and their expression increased compared to liver cells. However, tubulin beta-1 chain and natural killer cell enhancing factor B were downregulated in hepatoma cells. A tumor suppressing serpin, maspin precursor, was identified from one spot whose quantity was much higher in the normal liver cell line. More interestingly, epidermal fatty acid-binding protein (E-FABP) and fatty acid-binding protein, adipocyte-type (A-FABP), were detected in liver cells but not in hepatoma cells. The functional implication of the identified proteins was discussed.     

Microwave assisted digestion of atmospheric aerosol samples followed by inductively coupled plasma mass spectrometry determination of trace elements

A microwave digestion method in a closed vessel was developed for the determination of trace metals in atmospheric aerosols using inductively coupled plasma mass spectrometry (ICP-MS). A recovery study for the elements V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Cd, Sb, and Pb was conducted using multi-elemental standard solutions, NIST 1633b Trace Elements in Coal Fly Ash, and NIST 1648 Urban Particulate Matter. A simple digestion method using only HNO3/H2O2 gave good recoveries (90%-108%) for all elements except Cr in SRM 1648, but yielded low recoveries for SRM 1633b. A more robust method using HNO3/H2O2/HF/H3BO3 yielded higher recoveries (82%-103%) for the lighter elements (V-Zn) in SRM 1633b, and improved the Cr recovery in SRM 1648, but decreased the Se recovery in both SRMs. A comparative analysis of aerosol samples obtained at a remote mountain location Nathiagali, Pakistan (2.5 km above mean sea level), and Mayville, New York, downwind from the highly industrialized Midwestern United States, was carried out using Instrumental Neutron Activation Analysis (INAA) for the elements Cr, Mn, Fe, Co, Zn, As, Se, and Sb. The simple digestion method yielded excellent agreement for Cr, Fe, Zn, As, Se, and Sb, with slopes of the ICP-MS vs. INAA regressions of 0.90-1.00 and R2 values of 0.96-1.00. The regressions for Mn and Co had slopes of 0.82 and 0.84 with R2 values of 0.83 and 0.82, respectively. Addition of HF/H3BO3 did not improve the correlation for any of the elements and degraded the precision somewhat. The technique provides sensitivity and accuracy for trace elements in relatively small aerosol samples used in atmospheric chemistry studies related to SO2 oxidation in cloud droplets. The ability to determine concentrations of a very large number of elements from a single analysis will permit source apportionment of various trace pollutants and hence strategies to control the sources of air pollution. This is particularly important as the health effects of particulate matter are increasingly recognized.