Effect of metallic and hyperbolic metamaterial surfaces on electric and magnetic dipole emission transitions

Spontaneous emission patterns of electric and magnetic dipoles on different metallic surfaces and a hyperbolic metamaterial (HMM) surface were simulated using the dyadic Green’s function technique. The theoretical approach was verified by experimental results obtained by measuring angular-dependent emission spectra of europium ions on top of different films. The results show the modified behavior of electric and magnetic dipoles on metallic and HMM surfaces. The results of numerical calculations agree well with experimental data.     

All fiber supercontinuum light source using photonic crystal fibers pumped by nanosecond fiber laser pulses

A novel compact supercontinuum (SC) source using the single mode photonic crystal fibers (PCF) pumped with an all fiber MOPA fiber laser is demonstrated experimentally. A bandwidth of 700 nm is achieved by operating the pumping fiber laser at a wavelength of 1064 nm, pulse duration of 10 ns, repetition rate of 50 kHz and peak power of 1 kW. The SC generation is initiated through modulation instability (MI) which breakups the nanosecond pump pulses into picosecond or femtosecond pulses, and further broadened through nonlinear effects of PCF.     

InN thin film lattice dynamics by grazing incidence inelastic x-ray scattering

Achieving comprehensive information on thin film lattice dynamics so far has eluded well established spectroscopic techniques. We demonstrate here the novel application of grazing incidence inelastic x-ray scattering combined with ab initio calculations to determine the complete elastic stiffness tensor, the acoustic and low-energy optic phonon dispersion relations of thin wurtzite indium nitride films. Indium nitride is an especially relevant example, due to the technological interest for optoelectronic and solar cell applications in combination with other group III nitrides.     

Internal friction study on bilayer cuprates Pr(Ba1−xSrx)2Cu3O7−δ

The internal friction of partially Sr-substituted Pr(Ba_1?xSr_x)₂Cu₃O_7?δ (x = 0, 0.05, 0.1, 0.2, 0.3, and 0.4) ceramics was measured by the vibrating-reed method from liquid nitrogen temperature to room temperature at kilohertz frequencies. The intensity of the internal friction peak, which appears around 250 K, decreases upon Sr doping. The result is explained in terms of a possible combining structural freezing transition of CuO₅ square pyramids and oxygen atoms in CuO_x chains. Another internal friction peak around 134 K was observed in tetragonal Pr(Ba_0.6Sr_0.4)₂Cu₃O_7?δ which is temporarily explained by the hopping of holes in the CuO₂ layers.     

Levitation performance of the magnetized bulk high-Tc superconducting magnet with different trapped fields

To a high-T_c superconducting (HTS) maglev system which needs large levitation force density, the magnetized bulk high-T_c superconductor (HTSC) magnet is a good candidate because it can supply additional repulsive or attractive force above a permanent magnet guideway (PMG). Because the induced supercurrent within a magnetized bulk HTSC is the key parameter for the levitation performance, and it is sensitive to the magnetizing process and field, so the magnetized bulk HTSC magnets with different magnetizing processes had various levitation performances, not only the force magnitude, but also its force relaxation characteristics. Furthermore, the distribution and configuration of the induced supercurrent are also important factor to decide the levitation performance, especially the force relaxation characteristics. This article experimentally investigates the influences of different magnetizing processes and trapped fields on the levitation performance of a magnetized bulk HTSC magnet with smaller size than the magnetic inter-pole distance of PMG, and the obtained results are qualitatively analyzed by the Critical State Model. The test results and analyses of this article are useful for the suitable choice and optimal design of magnetized bulk HTSC magnets.     

Transition of MHD kink-stability properties between line-tied and non-line-tied boundary conditions

Magnetic flux tubes or flux ropes in plasmas are important in nature and the laboratory. Axial boundary conditions strongly affect flux rope behavior, but this has never been systematically investigated. We experimentally demonstrate for the first time axial boundary conditions that are continuously varied between ideal magnetohydrodynamic (MHD) line-tied (fixed) and non-line-tied (free). In contrast with the usual interpretation that mechanical plasma motion is MHD line-tied to a conducting boundary, we constrain boundary plasma motion to cause the line-tied condition.     

Effect of partonic "wind" on charm quark correlations in high-energy nuclear collisions

In high-energy collisions, massive heavy quarks are produced back to back initially and they are sensitive to early dynamical conditions. The strong collective partonic wind from the fast expanding quark-gluon plasma created in high-energy nuclear collisions modifies the correlation pattern significantly. While the hot and dense medium in collisions at the BNL Relativistic Heavy Ion Collider (sqrt[_s{NN}]=200 GeV) can only smear the initial back-to-back D_D correlation, a clear and strong near side D_D correlation is expected at the CERN Large Hadron Collider (sqrt[_s{NN}]=5500 GeV). This is considered as a signature for the strongly coupled quark-gluon plasma.     

CFD study on the magnetic fluid delivering in the vessel in high-gradient magnetic field

This paper simulated the advection and diffusion behaviors of the moving magnetic fluid in the vessel in the high-gradient magnetic field using Navier–Stokes equations. The particles accumulation behavior and the streamlines and the contour of concentration are all affected by the susceptibility, intensity of magnetic field and its gradient, and the flow velocity and also by the difference in size of vessels. The typical accumulation behaves as a solid obstacle in the flow as result of the competing between magnetic and fluid drag forces, and gives rise to a rigidly bound core region followed by a wash away region near the vessel boundary under the condition of 10 mm vessel in width. While the vessel is near 1 mm in width, the magnetic force is exerted almost on the whole vessel area, the vortex is not seen, the wash away area disappears and the concentration changes in the whole vessel. The results of the analysis provide meaningful information on ferrofluid transport and stabilization for various magnetic drug targeting and the magnetic fluid sealing, and other use in industrial and medical fields.     

Routes to control of H2 Coulomb explosion in few-cycle laser pulses

We have measured coincident ion pairs produced in the Coulomb explosion of H2 by 8-30 fs laser pulses at different laser intensities. We show how the Coulomb explosion of H2 can be experimentally controlled by tuning the appropriate pulse duration and laser intensity. For laser pulses less than 15 fs, we found that the rescattering-induced Coulomb explosion is dominated by first-return recollisions, while for longer pulses and at the proper laser intensity, the third return can be made to be the major one. Additionally, by choosing suitable pulse duration and laser intensity, we show H2 Coulomb explosion proceeding through three distinct processes that are simultaneously observable, each exhibiting different characteristics and revealing distinctive time information about the H2 evolution in the laser pulse.     

Enhanced self-diffusion on Cu(111) by trace amounts of s: chemical-reaction-limited kinetics

We find that less than 0.01 monolayer of S can enhance surface self-diffusion on Cu(111) by several orders of magnitude. The measured dependence of two-dimensional island decay rates on S coverage (theta(S)) is consistent with the proposal that Cu3S3 clusters are responsible for the enhancement. Unexpectedly, the decay and ripening are diffusion limited with very low and very high theta(S) but not for intermediate theta(S). To explain this result we propose that surface mass transport in the intermediate region is limited by the rate of reaction to form Cu3S3 clusters on the terraces.