Stabilizing Solid-state Lithium Metal Batteries through In Situ Generated Janus-heterarchical LiF-rich SEI in Ionic Liquid Confined 3D MOF/Polymer Membranes

Pursuing high power density lithium metal battery with high safety is essential for developing next-generation energy-storage devices, but uncontrollable electrolyte degradation and the consequence formed unstable solid-electrolyte interface (SEI) make the task really challenging. Herein, an ionic liquid (IL) confined MOF/Polymer 3D-porous membrane was constructed for boosting in situ electrochemical transformations of Janus-heterarchical LiF/Li₃N-rich SEI films on the nanofibers. Such a 3D-Janus SEI-incorporated into the separator offers fast Li⁺ transport routes, showing superior room-temperature ionic conductivity of 8.17×10⁻⁴ S cm⁻¹ and Li⁺ transfer number of 0.82. The cryo-TEM was employed to visually monitor the in situ formed LiF and Li₃N nanocrystals in SEI and the deposition of Li dendrites, which is greatly benefit to the theoretical simulation and kinetic analysis of the structural evolution during the battery charge and discharge process. In particular, this membrane with high thermal stability and mechanical strength used in solid-state Li||LiFePO₄ and Li||NCM-811 full cells and even in pouch cells showed enhanced rate-performance and ultra-long life spans.     

Benzotriazole-Based 3D Four-Arm Small Molecules Enable 19.1 % Efficiency for PM6 : Y6-Based Ternary Organic Solar Cells

A third component featuring a planar backbone structure similar to the binary host molecule has been the preferred ingredient for improving the photovoltaic performance of ternary organic solar cells (OSCs). In this work, we explored a new avenue that introduces 3D-structured molecules as guest acceptors. Spirobifluorene (SF) is chosen as the core to combine with three different terminal-modified (rhodanine, thiazolidinedione, and dicyano-substituted rhodanine) benzotriazole (BTA) units, affording three four-arm molecules, SF-BTA1, SF-BTA2, and SF-BTA3, respectively. After adding these three materials to the classical system PM6 : Y6, the resulting ternary devices obtained ultra-high power-conversion efficiencies (PCEs) of 19.1 %, 18.7 %, and 18.8 %, respectively, compared with the binary OSCs (PCE=17.4 %). SF-BTA1-3 can work as energy donors to increase charge generation via energy transfer. In addition, the charge transfer between PM6 and SF-BTA1-3 also acts to enhance charge generation. Introducing SF-BTA1-3 could form acceptor alloys to modify the molecular energy level and inhibit the self-aggregation of Y6, thereby reducing energy loss and balancing charge transport. Our success in 3D multi-arm materials as the third component shows good universality and brings a new perspective. The further functional development of multi-arm materials could make OSCs more stable and efficient.     

Spatially Directed Pyrolysis via Thermally Morphing Surface Adducts

Combustion is often difficult to spatially direct or tune associated kinetics—hence a run-away reaction. Coupling pyrolytic chemical transformation to mass transport and reaction rates (Damköhler number), however, we spatially directed ignition with concomitant switch from combustion to pyrolysis (low oxidant). A ‘surface-then-core’ order in ignition, with concomitant change in burning rate,is therefore established. Herein, alkysilanes grafted onto cellulose fibers are pyrolyzed into non-flammable SiO₂ terminating surface ignition propagation, hence stalling flame propagating. Sustaining high temperatures, however, triggers ignition in the bulk of the fibers but under restricted gas flow (oxidant and/or waste) hence significantly low rate of ignition propagation and pyrolysis compared to open flame (Liñán's equation). This leads to inside-out thermal degradation and, with felicitous choice of conditions, formation of graphitic tubes. Given the temperature dependence, imbibing fibers with an exothermically oxidizing synthon (MnCl₂) or a heat sink (KCl) abets or inhibits pyrolysis leading to tuneable wall thickness. We apply this approach to create magnetic, paramagnetic, or oxide containing carbon fibers. Given the surface sensitivity, we illustrate fabrication of nm- and μm-diameter tubes from appropriately sized fibers.     

Few-Layer Fullerene Network for Photocatalytic Pure Water Splitting into H2 and H2O2

A few-layer fullerene network possesses several advantageous characteristics, including a large surface area, abundant active sites, high charge mobility, and an appropriate band gap and band edge for solar water splitting. Herein, we report for the first time that the few-layer fullerene network shows interesting photocatalytic performance in pure water splitting into H₂ and H₂O₂ in the absence of any sacrificial reagents. Under optimal conditions, the H₂ and H₂O₂ evolution rates can reach 91 and 116 μmol g⁻¹ h⁻¹, respectively, with good stability. This work demonstrates the novel application of the few-layer fullerene network in the field of energy conversion.     

一锅法制备1T/2H-WS2/WO3异质结用于紫外可见光催化的CO2还原

采用一锅水热法制备了1T/2H-WS2/WO3异质结,并利用XRD、SEM、XPS等对所制备的光催化材料进行了系统微结构表征。研究发现该异质结催化剂可以水蒸汽作为电子供体,利用可见光催化还原CO2,以3.87 μmol g-1 h-1的速率高选择性的生成唯一产物CO。在紫外-可见光辐照下,表现出更优异的催化活性（34.39 μ mol g-1 h-1）。经4次循环实验,仍然表现出稳定的光催化二氧化碳还原效率,证明其具有优异的稳定性。     

Correlating Structure and KA2 Catalytic Activity of ZnII Hydrazone Complexes

Two new Zn(II) complexes bearing tridentate hydrazone-based ligands with NNO or NNS donor atoms were synthesised and characterised by elemental analysis, infrared (IR) and nuclear magnetic resonance (NMR) spectroscopies, and single crystal X-ray diffraction methods. These complexes, together with four previously synthesised analogues, having hydrazone ligands with a NNO donor set of atoms, were successfully employed as catalysts in the ketone-amine-alkyne (KA²) coupling reaction, furnishing tetrasubstituted propargylamines, compounds with unique applications in organic chemistry. DFT calculations at the CAM-B3LYP/TZP level of theory were performed to elucidate the electronic structure of the investigated Zn(II) complexes, excellently correlating the structure of the complexes to their catalytic reactivity.     

高效医学传感钙钛矿材料研究进展

卤化物钙钛矿材料作为一种新型半导体材料,具有优异的光电转换特性、能级结构可调、易于加工、结构和尺寸以及形貌可调、改性后优异的生物相容性等优点,在医学检测传感器中具有广阔的应用前景。本综述讨论了钙钛矿材料在生物医学传感领域的研究进展,钙钛矿医学传感器能通过光电转换、全光转换、电催化等多种物理或化学机制实现传感,具有可灵活选择的器件结构、性能指标和信号传递方式,用于人体代谢物质、神经递质、癌症相关物质和药物等医学物质的检测。钙钛矿医学传感器将为未来的医工多学科融合提供新希望,加快医工融合发展。     

利用空间位阻和氢溢流协同作用促进5-羟甲基糠醛选择性加氢制备5-甲基糠醛

Selective hydrogenation is a vital class of reaction. Various unsaturated functional groups in organic compounds, such as aromatic rings, alkynyl (C≡C), carbonyl (C＝O), nitro (-NO₂), and alkenyl (C＝C) groups, are typical targets in selective hydrogenation. Therefore, selectivity is a key indicator of the efficiency of a designed hydrogenation reaction. 5-(Hydroxymethyl)furfural (HMF) is an important platform compound in the context of biomass conversion, and recently, the hydrogenation of HMF to produce fuels and other valuable chemicals has received significant attention. Controlling the selectivity of HMF hydrogenation is paramount because of the different reducible functional groups (C＝O, C-OH, and C＝C) in HMF. Moreover, the exploration of new routes for hydrogenating HMF to valuable chemicals is becoming attractive. 5-Methylfurfural (MF) is also an important organic compound; thus, the selective hydrogenation of HMF to MF is an essential synthetic route. However, this reaction has challenging thermodynamic and kinetic aspects, making it difficult to realize. Herein, we propose a strategy to design a highly efficient catalytic system for selective hydrogenation by exploiting the synergy between steric hindrance and hydrogen spillover. The design and preparation of the Pt@PVP/Nb₂O₅ catalyst (PVP = polyvinyl pyrrolidone; Nb₂O₅ = niobium(V) oxide) were also conducted. Surprisingly, HMF could be converted to MF with 92% selectivity at 100% HMF conversion. The reaction pathway was revealed through the combination of control experiments and density functional theory calculations. Although PVP blocked HMF from accessing the surface of Pt, hydrogen (H₂) could be activated on the surface of Pt due to its small molecular size, and the activated H₂ could migrate to the surface of Nb₂O₅ through a phenomenon called H₂ spillover. The Lewis acidic surface of Nb₂O₅ could not adsorb the C＝O group but could adsorb and activate the C-OH group of HMF; therefore, when HMF was adsorbed on Nb₂O₅, the C-OH groups were hydrogenated by the spilled over H₂ to form MF. The high selectivity of this reaction was realized because of the unique combination of steric effects, hydrogen spillover, and tuning of the electronic states of the Pt and Nb₂O₅ surfaces. This new route for producing MF has great potential for practical application owing to its discovered advantages. We believe that this novel strategy can be used to design catalysts for other selective hydrogenation reactions. Furthermore, this study demonstrates a significant breakthrough in selective hydrogenation, which will be of interest to researchers working on the utilization of biomass, organic synthesis, catalysis, and other related fields.      

BEHAVIOR OF SUPPORTED NANO-COPPER CATALYST IN CO OXIDATION

IntroductionNanomaterialisanewkindofmaterialwithparticlesizebetWeenIurnand100urn.Becauseofthesmallparticlesizeandthelargespecificsufficearea,nanomaterialpossessesmanyparticularproperties,suchashighersufficeenergyandhighersurfaceactivity.t.[l]Thehigheracti…     

生长素自旋标记物的合成及生物活性

将４－氧－２，２，６，６－四甲基哌啶－１－氧自由基（ＴＭＰＯ）与３种植物生长素拼接在一起，合成了相应的腙，以研究ＴＭＰＯ对生长素活性的影响．所得化合物的结构通过ＩＲ、ＥＳＲ、元素分析或ＭＳ加以证实．初步生物活性测定表明，与母体相比不仅对绿豆幼苗的生长促进作用无影响，在一定条件下还增强了促进生长的活性