钇对2618合金组织及性能的影响

采用X射线，光学显微镜及扫描电镜等手段研究了2618合金中的组织与相结构，并研究了元素钆在2618合金中的存在形式及其对合金力学性能的影响。结果表明，微量钆元素在铝合金中是以化合物形式存在的；钆对合金中的铸态组织及Al9FeNi仃形态没有影响。由于微量钆的加入，降低了铜与镁在2618合金中的固溶量，减少了时效析出相A2CuMg数量，从而降低2618合金的室温强度帮在250℃的高温瞬时强度；但由于微量钆减少了铜与镁在2618合金中的扩散速度，延缓了时效机的粗化，并由于第二相数量的增多，因此提高了2618合金在250℃经100h高温热暴露后的高温瞬时强度。     

C1/Ag(111)体系研究 Ⅳ.氯吸附对甲醇吸附氧化的影响

运用HREELS技术对甲醇在预吸附氯的Ag(111)表面上的吸附氧化行为进行了较细致的研究.结果证明Cl对甲醇氧化的影响缘于它在Ag(111)上的吸附所引起的表面结构的改变进而改变表面氧吸附物种,从而使得甲醇氧化的中间产物发生变化.实验结果说明甲醇在Ag(111)和低暴露量氯吸附的Ag(111)表面上的氧化行为是相似的,检测到了中间产物Ⅰ和Ⅲ;在高暴露量氯吸附的Ag(111)上甲醇氧化时则产生中间产物Ⅰ、Ⅳ和甲醛物种.对上述不同的甲醇氧化行为作了分析,并指出了以前人们在考察甲醇氧化机理时只考虑原子氧作用的片面性.     

The Study on the Thermal Stability of CLA in Egg Yolk

Conjugated linoleic acids (CLA) have been a subject of extensive investigation for their anticarcinogenic, hypolipidemic, antiatherosclerotic and immune-enhancing activities. Stability of CLA in foods has not received much attention by both academics and industry. Although CLA has shown many beneficial effects, its decomposition must be prevented when CLA in foods is processed, stored and transported. However, no study to date has addressed the stability of CLA in foods. The present study was carried out further to examine the stability of CLA in egg yolk during the storage and frying, using gas liquid chromatography (GLC) and silver ion high-performance liquid chromatography (Agt-HPLC). The eggs, containing 4.0% CLA per gramme of egg yolk, were 40s. Either storage for 6 months or frying for 40 s did not significantly change the composition of CLA in egg yolk. However, the degradation of CLA was statistically significant when the CLA components of egg yolk protected CLA from degradation. It is concluded that CLA is well preserved in egg before it is consumed.     

稀土萘乙酸邻菲绕啉三元配合物的合成和表征

合成了6种稀土(RE)-萘乙酸(NAA)-邻菲绕啉(Phen)固体配合物,其通式为RE(NAA)_3·Phen(RE=Y,La,Nd,Sm,Eu,Er)。通过元素分析,摩尔电导,IR,UV-Vis,H-NMR,XPS和TG-DTA分析,研究了配合物组成、性质及稀土离子与配体间的成键特性。     

含多氟烷基侧链的螺环化合物的简易合成及其谱学研究

通过多步反应合成了含有一个长链氟烷基的螺环化合物（2-（5-氯-2，2，3，3，4，4，5，5-八氟-戊烷基）．3-（1-碘-甲基）-8，8-二甲基-7，9-二氧杂-螺[4，5]癸烷-6，10-二酮）。通过对各步产物及最终化合物的^1H NMR、^13C NMR、^1H-^13C COSY和IR、MS谱及X-衍射图的分析，对相关化合物进行了结构确证。     

水热微乳液法合成BaLiF3∶Er3+纳米微粒及表征

采用水/CTAB/正丁醇/正辛烷体系微乳液法及水热技术制备了BaLiF3∶Er3+纳米微粒.利用X射线衍射(XRD)、环境扫描电镜(ESEM)和红外荧光光谱等手段对所制备产物进行了表征.X射线衍射数据表明, 所制备微粒与JCPDS 标准卡片18-715吻合很好, 利用谢乐公式计算所制备产物平均粒径在98.45 nm左右, 与环境扫描电镜观察结果基本相同.BaLiF3∶Er3+纳米微粒的红外发射图谱由4个峰构成, 最强峰位于1540 nm处, 属于Er3+的f→f跃迁.     

聚醚氨酯薄膜表面性质的反相色谱法研究

本文报道了用反相色谱法研究多嵌段聚醚氨酯与几种低分子化合物的相互作用,测定了表征相互作用的热力学参数。结果表明,由ESCA证明表面软段富集的聚醚氨酯的反相色谱行为主要决定于富集层与探针分子的相互作用;苯及几种烷烃和聚醚氨酯的偏摩尔混合热和它的溶度参数与软段组分的溶度参数差值有关。     

Synthesis of Highly Porous Organic/Inorganic Hybrids by Ambient Pressure Sol-Gel Processing

This paper reports the synthesis of highly porous organic/inorganic hybrids by a two-step acid-base catalyzed sol-gel process and ambient pressure drying. In the method organic and inorganic precursors are copolymerized so as to incorporate organic ligands into the solid network. The two-step acid-base catalyzed process was used to prevent phase segregation during the hydrolysis and co-condensation of organic and inorganic precursors. The organic ligands incorporated into the solid gel network modify the surface chemistry. Thus, the wetting angle is significantly increased so that the collapse of the gel network is greatly reduced upon the removal of pore fluid during drying. Organic/inorganic hybrids with BET surface areas above 1250 m2/g, porosities above 75% and pore sizes of 8 nm have been synthesized.     

Study on the effects of fluorine and oxygen deficiency on YBa2Cu307 byab initio method

The calculations of clusters modeling the fluorine-doping and oxygen deficiency of YBa₂Cu₃0₇ have been performed by the method of all-electronab initio Hartree-Fock with self-consistent crystal field. Results show that in CuO planes electric charge significantly increases, the chemical valence of Cu decreases and the covalent bonding of Cu-O greatly weakens owing to oxygen deficiency, while the effect of F restores the local electronic structure of YBa₂Cu₃O₇. The reported opinion that F occupied the oxygen vacancy in Cu-O chains seems disputable according to the calculated bonding characteristics Project supported by the National Natural Science Foundation of China.     

共轭二烯烃的Ziegler─Natta催化聚合

共轭二烯烃的聚合是配位阴离子聚合，双金属配合物是聚合的活性中心，控制单体的构象是控制聚合物结构的关键。单体在低值配位场稳定化能（ＬＦＳＥ）过渡金属离子，如Ｃｏ~（２＋）、Ｔｉ~（３＋）上螯合，螯合单体具有顺式构象，所得聚合物具有顺１，４结构；在中等ＬＦＳＥ的过渡金属离子，如Ｖ~（３＋）、Ｃｒ~（３＋）上配位，配位单体具有反式构象，所得聚合物具有反１，４结构或是１，２聚合物；高ＬＦＳＥ值过渡金属离子不易控制活性价态，双金属配合物不够稳定，所得聚合物分子量常较低，结构规整性也常不够理想。