Sol-gel derived carbon ceramic electrode containing methylene blue-intercalated α-zirconium phosphate micro particles

Methylene blue-intercalated alpha-zirconium phosphate (MBZrP) micro particles in deionized water were deposited onto the surface of graphite powder to prepare graphite powder-supported MBZrP, which was subsequently dispersed into methyltrimethoxysilane-derived gels to yield a conductive composite. The composite was used as electrode material to fabricate a surface-renewable, rigid, leak-free carbon ceramic composite electrode, bulk-modified with methylene blue (MB). In the configuration, alpha-zirconium phosphate was employed as a solid host for MB, which acted as a catalyst. Graphite powder ensured conductivity by percolation, the silicate provided a rigid porous backbone and the methyl groups endowed hydrophobicity and thus limited the wetting section of the modified electrode. Peak currents of the MBZrP-modified electrode were surface-confined at low scan rates but diffusion-controlled at high scan rates. Square-wave voltammetric study revealed that MBZrP immobilized in carbon ceramic matrix presented a two-electron, three-proton redox process in acidic aqueous solution with pH ranged from 0.44 to 2.94. In addition, the chemically modified electrode showed an electrocatalytic activity toward nitrite reduction at +0.15 V ( vs. Ag/AgCl) in acidic aqueous solution (pH=0.44). The linear range and detection limit are 1x10(-6)-4x10(-3) mol x L(-1) and 1.5x10(-7) mol x L(-1), respectively.     

Influence of the water molecule on cation-pi interaction: ab initio second order Møller-Plesset perturbation theory (MP2) calculations

The influence of introducing water molecules into a cation-pi complex on the interaction between the cation and the pi system was investigated using the MP2/6-311++G method to explore how a cation-pi complex changes in terms of both its geometry and its binding strength during the hydration. The calculation on the methylammonium-benzene complex showed that the cation-pi interaction is weakened by introducing H(2)O molecules into the system. For example, the optimized interaction distance between the cation and the benzene becomes longer and longer, the transferred charge between them becomes less and less, and the cation-pi binding strength becomes weaker and weaker as the water molecule is introduced one by one. Furthermore, the introduction of the third water molecule leads to a dramatic change in both the complex geometry and the binding energy, resulting in the destruction of the cation-pi interaction. The decomposition on the binding energy shows that the influence is mostly brought out through the electrostatic and induction interactions. This study also demonstrated that the basis set superposition error, thermal energy, and zero-point vibrational energy are significant and needed to be corrected for accurately predicting the binding strength in a hydrated cation-pi complex at the MP2/6-311++G level. Therefore, the results are helpful to better understand the role of water molecules in some biological processes involving cation-pi interactions.     

Novel one-dimensional tubelike and two-dimensional polycatenated metal-organic frameworks

Two novel metal-organic frameworks (MOFs) [Zn(TITMB)(OAc)](OH).8.5H(2)O (1) and [Ag(TITMB)N(3)].H(2)O (2) [TITMB = 1,3,5-tris(imidazol-1-ylmethyl)-2,4,6-trimethylbenzene, OAc = acetate anion] were synthesized and their structures were determined by X-ray crystallography. Complex 1 crystallizes in tetragonal space group P(-)4 with a = 23.2664(7) and c = 11.9890(3) A and Z = 8. 1 has a one-dimensional tubelike structure with large inner pore size of approximately 17 A. Complex 2 crystallizes in monoclinic space group C2 with a = 20.7193(10), b = 11.5677(8), and c = 12.2944(6) A, beta = 125.5770(10) degrees, and Z = 4. 2 consists of two-dimensional honeycomb networks that interpenetrate each other to generate a polycatenated structure. In these two complexes, both zinc(II) and silver(I) atoms are four-coordinated with the same tetrahedral coordination geometry. The topologies of 1 and 2 are predominated by the conformations of TITMB, which are cis, trans, trans in 1 and cis, cis, cis in 2, respectively.     

Electrogenerated Chemiluminescence Based on Tris(2,2′-bipyridyl) Ruthenium(II) with Hydroxyl Carboxylic Acid

Upon the electrochemical oxidation of tris(2,2′-bipyridyl) ruthenium(II) [Ru(bpy)²⁺₃] and hydroxyl carboxylic acids, for instance, citric acid, tartaric acid, malic acid, and -gluconic acid, bright electrochemiluminescences (ECLs) were observed. Different luminescent reactions were presented depending on the applied potential. The light emission was mainly caused by the reaction between alkoxide radical ion and Ru(bpy)³⁺₃below the potential +1.80 V (vs Ag/AgCl). The luminescence intensity obviously increased because of the more complex reaction process. The luminescence wavelength of 608 nm, which could be found either at higher potential than +1.80 V or in the potential range from +1.30 to +1.80 V, confirmed that ECL was caused by Ru(bpy)²⁺₃*. The factors which affect the determination and HPLC separation of the four acids were also investigated.     

N2O decomposition over Fe/ZSM-5: reversible generation of highly active cationic Fe species

Fe-oxide species in Fe/ZSM-5 (prepared by chemical vapor deposition of FeCl3)--active in N2O decomposition--react with zeolite protons during high temperature calcination to give highly active cationic Fe species, this transformation being reversible upon exposure to water vapor at lower temperature.     

Mössbauer Spectroscopic Studies of Ferrocenylaldimines and their TCNQ Complexes

A series of ferrocenylaldimines (Fc-CH=N-R) has been prepared by Schiff base condensation of formylferrocene with polyacenylamines RNH₂ where R = naphthyl, 5,6,7,8-tetrahydronaphthyl, anthracenyl, and pyrenyl groups. This step was followed by oxidation with TCNQ to give [Fc-CH = N-R][TCNQ]² salts. The electronic state of iron in these compounds was investigated by means of⁵⁷Fe Mössbauer spectroscopy.     

Synthesis and formulation of vinyl-containing polyacids for improved light-cured glass-ionomer cements

Vinyl-containing poly(acrylic acid-co-itaconic acid) copolymers were synthesized and used to formulate light-curable cements containing reactive glass fillers (Fuji II LC). The conditions for light curing were studied and optimized. Effects of molecular weight (MW), grafting ratio, comonomer, liquid composition, powder/liquid (P/L) ratio, glass powder and aging were evaluated. The results show that the vinyl-containing glass-ionomer cements (GICs) prepared in this study exhibit higher compressive strength (CS, 225.6 MPa), diametral tensile strength (DTS, 28.4 MPa) and much higher flexural strength (FS, 116.4 MPa), as compared to commercial Fuji II LC GIC (186.6 in CS, 19.1 in DTS and 57.1 in FS). The optimal light-exposure time was found to be around 10 min, and concentrations of CQ and DC were 0.5% (by weight) and 1.0%, respectively. Effects of MW, grafting ratio, P/L ratio and content of polymer in the liquid formulation were significant. The highest strengths were found for the optimal formulations where the MW was 15,000 (weight average), grafting ratio 25 mol%, P/L ratio 2.7 and liquid composition 50:20:30. During aging, the cement showed an increase of strength over the first week and then no change for a month. SEM analysis suggests that more integrated microstructures and smaller glass particles can lead to higher FS and higher polymer content in GICs leads to tough fracture surface and plastic deformation.     

Synthesis of a novel 18β-glycyrrhetinic acid derivative

A novel compound, biotinylated 18β-glycyrrhetinic acid (BGA), was synthesized. It is a compound of 18β-glycyrrhetinic acid linked with biotin. Published in Khimiya Prirodnykh Soedinenii, No. 3, pp. 266–267, May–June, 2006. An erratum to this article is available at .     

Study of the Fluorescence System of Europium–Enoxacin and its Applications

 This paper is the study of the fluorescence enhancement of Eu³⁺-1-ethyl-6-fluoro-4-oxo-7-(1-piperazinyl)-1,8-naphthyridin-3-carbonic acid (enoxacin, EFLX) system by surfactants. It was found that sodium dodecylbenzenesulfonate (SDBS) exhibits great enhancement on the fluorescence of the Eu-EFLX system. The molar ratio is 1:2:1 for Eu:EFLX: SDBS. Under the optimum conditions, the fluorescence intensity is a linear function of europium in the range of 1.0 × 10⁻⁸ ∼ 5.0 × 10⁻⁶ mol/L, the detection limit is 1.0 × 10⁻⁹ mol/L. The application of the Eu-EFLX-SDBS system for the determination of trace europium in rare earth samples gave satisfactory results. Received October 19, 2000. Revision August 10, 2001.