Photocycloaddition reaction of methyl 2- and 3-chromonecarboxylates with various alkenes

The irradiation of methyl 2- and 3-chromonecarboxylate in the presence of various alkenes afforded cyclobutane type adducts, whose structures were established by X-ray structural analysis. Methyl 2-chromonecarboxylate showed higher photochemical reactivity than methyl 3-chromonecarboxylate, in which endo adducts were yielded as major products.     

Inducing a high twisted conformation in the polyimide structure by bulky donor moieties for the development of non-volatile memory

Two polyimides, PI(DAT-6FDA) and PI(DAPT-6FDA), from N-(2,4-diaminophenyl)-N,N-diphenylamine (DAT) or N-(4-(2′,4′-diaminophenoxy)phenyl-N,N-diphenylamine (DAPT) and 4,4′-(hexafluoroisopropylidene)diphthalic anhydride (6FDA) were prepared to clarify the structural effect on the resulting memory properties. The memory device based on PI(DAT-6FDA) showed an unstable volatile behavior, while the device based on PI(DAPT-6FDA) with a more bulky donor (D) unit exhibited a stable non-volatile FLASH type memory characteristic with a long retention time over 10⁴ s. The theoretical simulation based on the density functional theory (DFT) suggested that the greater distinct charge separation between the ground and charge transfer (CT) states led to a highly stable memory behavior. Also, it was clarified that PI(DAPT-6FDA) had a highly twisted conformation compared to PI(DAT-6FDA) in the ground state, and a more twisted dihedral angle between the D and acceptor (A) units was induced in the CT state, which led to the non-volatile memory characteristic.     

Enzymatic syntheses of unnatural head-to-tail pentacyclic triterpenes by tetraprenyl-β-curcumene cyclase

Little is known of the biosynthesis of sesquarterpenes and the synthesis of unnatural terpenoids by sesquarterpene biosynthetic enzymes has not yet been reported. In this study, the enzymatic cyclization of head-to-tail acyclic triterpene β-hexaprene—a natural product isolated from Bacillus clausii—using tetraprenyl-β-curcumene cyclase (TC) from Bacillus subtilis resulted in the formation of two unnatural pentacyclic triterpenes. It was revealed that B. subtilis TC, which forms tetracyclic terpenoid scaffold from tetraprenyl-β-curcumene in vivo, could be used to construct the 6/6/6/6/6-fused pentacyclic scaffold in vitro, suggesting that the active site cavity of TC has sufficient space to accommodate this unnatural pentacyclic scaffold. This is the first report demonstrating the utility of a sesquarterpene cyclase toward the synthesis of unnatural terpenoids.     

Reinvestigation of palladium-catalyzed allylation of the monoacetate of 4-cyclopentene-1,3-diol and synthesis of the coronafacic acid ethyl ester

A larger quantity of a β-keto ester that is 1.5–1.7 equiv more than the base (t-BuOK, NaH) was found to be essential in securing sufficient yields of the products in the palladium-catalyzed allylic substitution of the monoacetate of 4-cyclopentene-1,3-diol with β-keto esters. This requirement also works well for substitutions with the TBS ether of the monoacetate and the monoacetate of 2-cyclohexene-1,4-diol. As an application, the coronafacic acid ethyl ester was synthesized as an optically active form.     

Rigid-body dynamics in the isothermal-isobaric ensemble: a test on the accuracy and computational efficiency

We have developed a time-reversible rigid-body (rRB) molecular dynamics algorithm in the isothermal-isobaric (NPT) ensemble. The algorithm is an extension of rigid-body dynamics [Matubayasi and Nakahara, J Chem Phys 1999, 110, 3291] to the NPT ensemble on the basis of non-Hamiltonian statistical mechanics [Martyna, G. J. et al., J Chem Phys 1994, 101, 4177]. A series of MD simulations of water as well as fully hydrated lipid bilayer systems have been undertaken to investigate the accuracy and efficiency of the algorithm. The rRB algorithm was shown to be superior to the state-of-the-art constraint-dynamics algorithm SHAKE/RATTLE/ROLL, with respect to computational efficiency. However, it was revealed that both algorithms produced accurate trajectories of molecules in the NPT as well as NVT ensembles, as long as a reasonably short time step was used. A couple of multiple time-step (MTS) integration schemes were also examined. The advantage of the rRB algorithm for computational efficiency increased when the MD simulation was carried out using MTS on parallel processing computer systems; total computer time for MTS-MD of a lipid bilayer using 64 processors was reduced by about 40% using rRB instead of SHAKE/RATTLE/ROLL.     

Hydrothermal Synthesis of Mo-Based Oxide Catalysts and Selective Oxidation of Alkanes

Mo-V-M(=Al, Ga, Bi, Sb and Te)–O mixed oxide catalysts were synthesized hydrothermally for the first time, characterized structurally, and tested for ethane and propane oxidation after activation by various ways. These catalysts were black solids of rod-shaped (fiber like) crystals, which had a layer structure in the direction of fiber axis and a high dimensional arrangement of metal octahedra in the cross-section plane. These fresh crystalline materials became active for catalytic oxidation of alkanes after heat-treatment at 600 °C and subsequent grinding in order to increase exposed plane of the cross-section. The resulting catalysts were very active for an oxidative dehydrogenation of ethane with 80% of the ethylene selectivity in the reaction temperature range of 300 to 400 °C and also showed about 50% selectivity to acrylic acid in the propane oxidation. Multi-functional character which derived from the high dimensional structure of the catalysts and mechanism of the selective alkane oxidation were discussed.     

Periodic change of viscosity and density in an oscillating chemical reaction

It was found that the periodic change of the solution viscosity and density was generated in the Belousov-Zhabotinsky (BZ) reaction. This rhythmic phenomenon was observed in both the iron catalyst [[Fe(Phen)(3)](2+)-[Fe(Phen)(3)](3+)] and the cerium catalyst [Ce(III)-Ce(IV)] system, where the solution viscosity and density were synchronized with the redox potential in the in-phase mode. However, the time delay existed between the redox potential and the solution viscosity and density. The behavior of the BZ reaction was also monitored in the presence of the nonionic surfactant. This experiment revealed that, beyond the critical micelle concentration, the phase between the redox potential and the solution viscosity and density was synchronized into the antiphase mode. We suggested that the variation of the catalyst drove the oscillation of the solution viscosity and density in the BZ reaction.     

Evidence of Nonelectrochemical Shift Reaction on a CO-Tolerant High-Entropy State Pt-Ru Anode Catalyst for Reliable and Efficient Residential Fuel Cell Systems

A randomly mixed monodispersed nanosized Pt-Ru catalyst, an ultimate catalyst for CO oxidation reaction, was prepared by the rapid quenching method. The mechanism of CO oxidation reaction on the Pt-Ru anode catalyst was elucidated by investigating the relation between the rate of CO oxidation reaction and the current density. The rate of CO oxidation reaction increased with an increase in unoccupied sites kinetically formed by hydrogen oxidation reaction, and the rate was independent of anode potential. Results of extended X-ray absorption fine structure spectroscopy showed the combination of N(Pt-Ru)/(N(Pt-Ru) + N(Pt-Pt)) ? M(Ru)/(M(Pt) + M(Ru)) and N(Ru-Pt)/(N(Ru-Pt) + N(Ru-Ru)) ? M(Pt)/(M(Ru) + M(Pt)), where N(Pt-Ru)(N(Ru-Pt)), N(Pt-Pt)(N(Ru-Ru)), M(Pt), and M(Ru) are the coordination numbers from Pt(Ru) to Ru(Pt) and Pt (Ru) to Pt (Ru) and the molar ratios of Pt and Ru, respectively. This indicates that Pt and Ru were mixed with a completely random distribution. A high-entropy state of dispersion of Pt and Ru could be maintained by rapid quenching from a high temperature. It is concluded that a nonelectrochemical shift reaction on a randomly mixed Pt-Ru catalyst is important to enhance the efficiency of residential fuel cell systems under operation conditions.     

Organotin-catalyzed highly regioselective thiocarbonylation of nonprotected carbohydrates and synthesis of deoxy carbohydrates in a minimum number of steps

Nonprotected carbohydrates: The catalytic regioselective thiocarbonylation of carbohydrates by using organotin dichloride under mild conditions was demonstrated. The reaction afforded various deoxy saccharides in high yields and excellent regioselectivity in a minimum number of steps. The regioselectivity of the thiocarbonylation is attributed to the intrinsic character of the carbohydrates based on the stereorelationship of their hydroxy groups (see scheme).