Generation of a Sub-10fs Laser Pulse by a Ring Oscillator with a High Repetition Rate

A compact femtosecond Ti：sapphire ring oscillator composed of chirped mirrors is designed. By accurately optimizing the intra-cavity dispersion and the mode locking range of the ring configuration, we generate laser pulses as short as 7.7fs with a repetition rate as high as 745 MHz. The spectrum spans from 660nm to 94Ohm and the average output power is 480mW under the cw pump laser of 7.5 W.     

Ultrasonic Vibration Suspends Large Pendant Drops

A stationary substrate can suspend only small pendant drops even with excellent wetting ability because of gravity. We report the suspension of large pendant water drops by a copper substrate that vibrates ultrasonically with a frequency of 22 kHz. The mass of the largest pendant drop suspended by the vibrating substrate reaches 1.1 g, which is 9 times that by the same stationary substrate. The pendant drop deforms drasticaJly and quickly at both the beginning and the end of the vibration procedure. As the vibration power increases, the contact area between the drop and substrate expands and the drop height shrinks accordingly. Theoretical analysis indicates that the Bernoulli pressure induced by ultrasonic vibration may contribute strongly to enhancing the suspensibility of pendant drops.     

Analysis of a Novel Ka-band Folded Waveguide Amplifier for Traveling-Wave Tubes

A novel Ka-band folded waveguide （FW） amplifier for traveling wave tubes （TWT） is investigated. The dispersion curve and interaction impedance are obtained and compared to the normal FW circuit by numerical simulation. The interaction impedance is higher than a normal circuit through the whole band. We also study the beamwave interaction in this novel circuit, and the nonlinear large-signal performance is analyzed by a 3-D particlein-cell code MAGIC3D. A much higher continuous-wave （CW） output power with a considerably shorter circuit compared to a normal circuit is predicted by our simulation. Moreover, the novel FW even has a broader 3-dB bandwidth. It therefore will be useful in designing a miniature but high-power and broadband millimeter-wave TWT.     

Structural Feature and Solute Trapping of Rapidly Grown Ni3Sn Intermetallic Compound

The rapid dendritic growth of primary Ni3Sn phase in undercooled Ni-30.9%Sn-5%Ge alloy is investigated by using the glass fluxing technique. The dendritic growth velocity of Ni3Sn compound is measured as a function of undercooling, and a velocity of 2.47m/s is achieved at the maximum undercooling of 251 K （0.17TL）. The addition of the Ge element reduces its growth velocity as compared with the binary Ni75Sn25 alloy. During rapid solidification, the Ni3Sn compound behaves like a normal solid solution and it displays a morphological transition of ＂coarse dendrite-equiaxed grain-vermicular structure＂ with the increase of undereooling. Significant solute trapping of Ge atoms occurs in the whole undercooling range.     

基于OTDR和SMA原理的分布温度阈值执行器的设计

温度阈值执行器的设计是准分布光纤温度报警系统对温度报警空间定位的关键.本文分析了基于OTDR和SMA设计温度阈值执行器的原理,提出了执行器的物理模型.通过实验测试,从SMA弹簧样品中选出了满足执行器技术要求的记忆弹簧,完成了执行器的机械设计.系统运行表明:执行器能有效运作,能够实现准分布温度报警,并且系统具有接近1.5 m的空间分辨率和低于16 s的响应时间等优良的性能参数.     

用于爆炸物探测的X射线相干散射技术研究

建立了基于X光机的相干散射实验装置, 对用于爆炸物探测的X射线相干散射技术进行了研究. 在一个固定的角度下(6.5°), 测量了多种常见爆炸物和非爆炸物的相干散射谱. 结果表明, 每种爆炸物都有特定的相干散射谱线, 包含了与物质化学组分相关的"指纹信息". 使用这一方法可以将爆炸物从常见的非爆炸物中鉴别出来.     

块状介质超连续谱相位的相干特性

 块状介质超连续谱由一系列复杂的非线性过程产生。用两路飞秒泵浦光聚焦到熔石英玻璃上得到两束独立的超连续谱,实验上观察到它们形成的稳定干涉条纹;改变两路泵浦光的时间延迟,得到共线超连续谱形成的频率梳。实验证明,块状介质超连续谱的产生保持了泵浦光的相位锁定关系,泵浦光能量抖动和介质的缺陷都不会对超连续谱的相位带来明显的扰动。     

镜像核13N-13C 和15N-15O中的激发态晕或皮(英文)

用非线性相对论平均场对两对镜像核13N-13C 和15N-15O进行了研究. 发现无论在基态还是激发态， 用两套参数所得的结合能都跟实验值很接近. 计算结果显示13N的第一激发态（2s1/2）和第三激发态（1d5/2）各存在一个非束缚的质子晕， 而13C的第三激发态（1d5/2）存在一个弱束缚的中子皮. 另外研究表明, 在另一对镜像核15N-15O的第二激发态（2s1/2）和第一激发态（2s1/2）分别存在一个中子晕和质子皮. Properties of two pairs of mirror nuclei 13N-13C and15N-15O are investigated by using the nonlinear relativistic mean field theory. It is found that all the calculated binding energies with two different parameter sets are very close to the experimental ones for both the ground states and the excited states. The calculations show that the first excited state (2s1/2) and the third excited state (1d5/2) in 13N are both unbound resonances with proton halo structure, whereas the third excited state (1d5/2) in 13C is weakly bound with a neutron skin. It is also predicted that there has a proton halo in the second excited state (2s1/2) of 15N as well as a neutron skin in the first excited state (2s1/2) of 15O.     

立体图像质量的主观评价方案

立体图像质量评价在立体图像压缩、处理以及通信领域中有着十分重要的作用,一种好的立体图像质量客观评价方法也要依赖于立体图像的主观评价.本文基于人眼的立体视觉特性,提出了相对完整的立体图像质量主观评价方案,该方案主要分为立体图像库的建立、评测者的选择、观看条件的描述、评测者的训练和测试、数据处理和实验结果分析六个方面.实验中,评测者根据自己的主观感受,对所选取的立体图像进行评分,最后用数理统计理论对所得数据进行处理.结果表明,本文所提出的主观评价方案可行,能够正确反映立体图像质量的优劣.     

可见光区大角度减反射光学薄膜制备工艺研究

为获得可见光波长范围的大角度减反射光学薄膜,采用电子束蒸发斜角蒸镀工艺,按照设计好的膜系,通过蒸镀一系列低折射率膜层,最终得到在380～780nm波长间,入射角0～70°,平均反射率低于1%的光学薄膜。实验结果表明利用斜角蒸镀工艺镀制出折射率从基底到空气的渐变多层膜结构以取得优良的减反射效果是可行的。