Supramolecular isomers in the same crystal: a new type of entanglement involving ribbons of rings and 2D (4,4) networks polycatenated in a 3D architecture

The reaction of corresponding cadmium salts with the flexible ligand 1,4-bis(1,2,4-triazol-1-ylmethyl)benzene (bbtz) affords the 3D coordination network [Cd3(bbtz)6(H2O)6](BF4)(6.1.75H2O (1), containing ribbons of rings and planar 2D (4,4) networks polycatenated with each other, the undulating 2D (4,4) network [Cd(bbtz)2(H2O)2](ClO4)2.2H2O (2), and ribbons of rings [Cd(bbtz)2(H2O)2](BF4)2.3DMF (3) and [Cd(bbtz)2(H2O)2](ClO4)2.3DMF (4).     

Temperature-dependent intermolecular force measurement of poly(N-isopropylacrylamide) grafted surface with protein

We have investigated the temperature dependence of the intermolecular force between poly(N-isopropylacrylamide) (PNiPAM) grafted surface and bovine serum albumin (BSA) in phosphate buffer (pH 7.4) using atomic force microscopy at the nanonewton scale. These observations show that the interaction force is nearly zero below the phase transition temperature of PNiPAM and that it increases steeply during the phase transition. Since the PNiPAM chains are grafted onto the aminosilane (gamma-aminopropyltriethoxysilane)-treated silicon wafer, we measured the force-distance curve of BSA-immobilized tips for the bare and the aminosilane-treated silicon wafer. These surfaces show no temperature dependence and their values are different from those of the PNiPAM-grafted surfaces at 30 degrees C. The results indicate that the measured adhesion force is between the PNiPAM-grafted surface and the BSA-immobilized tip. Our studies on the intermolecular force between other surfaces (CH(3)- and COOH-terminated self-assembled monolayers) and the BSA-immobilized tip indicate that the variation in the intermolecular force between the PNiPAM surface and BSA with temperature can be attributed to the changes in the properties of the PNiPAM chains. From consideration of the PNiPAM phase transition mechanism, it is speculated that the intermolecular force between the PNiPAM-grafted surface and BSA would be affected by changes in the arrangement of the bound water molecules around the PNiPAM chain and by changes in the conformation (i.e., in the chain mobility) of the PNiPAM chain during the phase transition.     

Roles of terminal groups of oligomer electrolytes in determining photovoltaic performances of dye-sensitized solar cells

The effect of terminal groups of oligomer electrolytes on the photovoltaic performance of dye-sensitized solar cells (DSSCs) have been systematically investigated to show that the terminal group plays a critical role in determining the concentration of I(3)(-), ionic conductivity, flatband potential and consequently the energy conversion efficiency.     

Compressed-CO2-assisted patterning of polymers

We report a facile route to pattern polymer surfaces with the aid of compressed CO(2), termed the compressed-CO(2)-assisted imprint method. In this method, compressed CO(2) serves as a plasticizer for polymers (such as poly(methyl methylate) and polystyrene), which leads to a tremendous reduction in the glass transition temperature and viscosity of the polymers. Nylon fabrics and anode aluminum oxide porous membranes are used as molds, respectively, to pattern the softened polymers at relatively low temperatures, resulting in patterns at the scale of micrometers and nanometers on the surface of polymer films. The patterned structures can be tuned by changing CO(2) pressure and temperature in the imprinting process. This method is simple and environmentally benign. It also can be operated at low temperatures, for instance, ambient temperature.     

Ultraviolet photolysis of CH2I2 in methanol: O-H insertion and HI elimination reactions to form a dimethoxymethane product

Ultraviolet photolysis of low concentrations of CH2I2 in methanol solution found that CH2I2 is converted into dimethoxymethane and some H+ and I- products. Picosecond time-resolved resonance Raman (ps-TR3) experiments observed that the isodiiodomethane (CH2I-I) photoproduct decayed faster as the concentration of methanol increases, suggesting that isodiiodomethane is reacting with methanol. Ab initio calculations indicate isodiiodomethane is able to react with methanol via an O-H insertion/HI elimination to form an iodoether (ICH2-O-CH3) and HI products. The iodoether can then further react via another O-H insertion/HI elimination reaction to form the dimethoxymethane (CH3-O-CH2-O-CH3) observed in the photochemistry experiments. A reaction mechanism consistent with these experimental and theoretical observations is proposed.     

Comparison of the dehalogenation of dihalomethanes (CH2XI, where X = Cl, Br, I) following ultraviolet photolysis in aqueous and NaCl saltwater environments

The ultraviolet photolysis of low concentrations of CH(2)XI (X = Cl, Br, I) were investigated in water and saltwater solutions by photochemistry and picosecond time-resolved resonance Raman spectroscopy. Photolysis in both kinds of solutions formed mostly CH(2)(OH)(2) and HI and HX products. However, photolysis of the CH(2)XI molecules in saltwater resulted in production of some CH(2)XCl products not observed in aqueous solutions without salt present. The appearance of these new products in saltwater solutions is accompanied by a decrease in the amount of CH(2)(OH)(2), HI, and HX products compared to photolysis in aqueous solutions without salt present. The possible implications for photolysis of CH(2)XI and other polyhalomethanes in seawater and other salt aqueous environments compared to nonsaltwater solvated environments is briefly discussed.     

Release of N(2) from the carbon nanotubes via high-temperature annealing

Nitrogen (N)-doped carbon nanotubes (CNTs) were heated to 1000 degrees C under an ultrahigh vacuum. X-ray photoelectron spectroscopy (XPS) and X-ray absorption near-edge structure (XANES) reveal three different N structures; graphitelike, pyridine-like, and molecular N(2). The vibrationally resolved XANES peaks of N(2) were first observed, suggesting the existence of molecular N(2) as intercalated and trapped forms. The annealing process can decrease the average N content from 6.3 at. % to 3.3 at. %, mainly by releasing molecular N(2). Electron energy-loss spectroscopy (EELS) confirms that the annealing releases molecular N(2) from the CNTs.     

Molecular recognition thermodynamics of bile salts by beta-cyclodextrin dimers: Factors governing the cooperative binding of cyclodextrin dimers

The complex stability constants (K(S)), standard molar enthalpy (DeltaH degrees), and entropy changes (DeltaS degrees) for the inclusion complexation of two families of beta-cyclodextrin (beta-CD) dimers, i.e. beta-CD dimers Se1-Se4 bearing 2,2'-diselenobis(benzoyl) tether (Se-dimers) and beta-CD dimers Py1-Py4 bearing 2,2'-bipyridine-4,4'-dicarboxy tether (Py-dimers), with four bile salt guests, i.e. sodium cholate (CA), sodium deoxycholate (DCA), sodium glycocholate (GCA), and sodium taurocholate (TCA), were determined at 25 degrees C in Tris buffer solution (pH 7.4) at 298.15 K by means of isothermal titration microcalorimetry. The thermodynamic parameters obtained, together with the ROESY spectra of interactions between beta-CD dimers and bile salts, consistently suggest that the length, flexibility, and structure of spacers linking the two beta-CD cavities not only determine the binding modes but also significantly alter the molecular selectivity of beta-CD dimers.     

Accurate determination of pyridine-poly(amidoamine) dendrimer absolute binding constants with the OPLS-AA force field and direct integration of radial distribution functions

OPLS-AA force field and direct integration of intermolecular radial distribution functions (RDF) were employed to calculate absolute binding constants of pyridine molecules to amino group (NH2) and amide group hydrogen atoms in and first generation poly(amidoamine) dendrimers in chloroform. The average errors in the absolute and relative association constants, as predicted with the calculations, are 14.1% and 10.8%, respectively, which translate into ca. 0.08 and 0.06 kcal/mol errors in the absolute and relative binding free energies. We believe that this level of accuracy proves the applicability of the OPLS-AA, force field, in combination with the direct RDF integration, to reproducing and predicting absolute intermolecular association constants of low magnitudes (ca. 0.2-2.0 range).     

牛血清白蛋白与十二烷基硫酸钠作用的机理

利用电动势法得到了牛血清白蛋白(BSA)与十二烷基硫酸钠(SDS)相互作用的结合等温线. 通过四阶导数紫外光谱法和荧光光谱法研究了相互作用过程中芳香族氨基酸残基微环境极性的变化. 通过研究发现, 随着SDS浓度的逐渐增大, SDS在BSA上的平均结合数(v)逐渐增大, 色氨酸(Trp)残基所处微环境的极性在减弱后保持基本不变, 酪氨酸残基所处微环境的极性在明显增强后稍有减弱, 苯丙氨酸残基所处微环境的极性略有增强. 结果表明, 当v由0增大到14时, SDS主要结合在BSA的Trp-213附近并逐渐形成聚集体, 从而诱导BSA由结构域ⅡA 开始逐渐展开. 此后, SDS呈正协同作用的特点与BSA 结合, v急剧增大. 当v约为302 时, SDS在BSA上的结合基本达到饱和, BSA的构象趋于稳定.