Thermal and acid-catalyzed reaction of bifunctional vinyl ether urethane in nonionic and ionic polymer matrices

A bifunctional vinyl ether urethane derivative (BVU) was synthesized and characterzed. Photoresist systems consisting of BVU and a photoacid generator (PAG) along with various matrix polymers were prepared and the photoresist characteristics were evaluated. In the presence of BVU and a PAG, poly(methylmethacrylate-co-acrylic acid) and poly(methylmethacrylate) exhibited positive and negative tone behavior, respectively, where as poly(p-hydroxystyrene) showed both positive and negative working properties depending on the prebake temperature of the system. The depandence of the photoresist behaviors on these matrix polymers was studied. The mechanism of the thermal and photochemical reactions was revealed.     

Recent Progress in Highly Sensitive Photothermal Spectroscopy

There are a wide variety of photothermal (PT), photoacoustic(PA) and related phenomena because a material under light illumination always generates heat triggering the phenomena. The heat subsequently makes local temperature rise, the material and its surroundings expand to emit acoustic waves, refractive index inside and outside of the material change, and so on.     

Solubility of GaN in supercritical ammonia with ammonium chloride as a mineralizer

The solubility of GaN in supercritical ammonia with ammonium chloride as a mineralizer was measured with a weight-loss method. Temperature-, pressure-, and mineralizer concentration-dependence of the solubility of GaN were investigated. The solubility increased with increase in temperature, and its pressure dependence was very low. The solubility behavior was quite different from the case of using the mineralizer KNH₂ as a basic mineralizer.     

Second harmonic generation-based coherent vibrational spectroscopy for a liquid interface under the nonresonant pump condition

The molecular dynamics in the low-frequency region (0-500 cm(-1)) sensitively reflects the intermolecular interactions in a liquid. The second harmonic generation-based coherent vibrational spectroscopy (SHG-CVS) was developed to monitor the low-frequency dynamics of molecules at a liquid interface, which was difficult to access by using the present spectroscopic techniques such as sum frequency generation or attenuated total reflection (ATR)-IR. Background-free detection with the transient grating (TG) optical configuration was adopted to obtain the weak signal under the electronically nonresonant pump condition. It was demonstrated that the S/N ratio of the SHG-CVS with the TG configuration was remarkably superior to that with the conventional time-resolved SHG configuration, and the improved detection limit enabled us to detect the low-frequency dynamics of coumarin 314 molecules at the air/water interface under the electronically nonresonant pump condition.     

Hydrothermal synthesis of MoS2 nanowires

The MoS₂ nanowires with diameters of 4 nm and lengths of 50 nm were synthesized by a hydrothermal method using 0.36 g MoO₃ and 1.8 g Na₂S as precursors in 0.4 mol/l HCl solution at 260°C. The products are characterized by XRD, XPS, TEM, HTEM and BET. Results show that the as-prepared MoS₂ nanowires consist of 1–10 sulfide layers with BET surface areas of 107 m²/g. The possible reaction route and the formation mechanism of the MoS₂ nanowires are discussed. The effects of exterior conditions such as pH value, temperature, concentration of precursors and additives on the particle size and morphology of MoS₂ crystallites were investigated.     

Negative‐working photoresist of methacrylate polymers based on the transesterification of the 2‐hydroxyethyl group in the presence of an acid

This article reports a novel crosslinking functionality of the 2‐hydroxyethyl methacrylate unit (HEMA) in the presence of an acid. The polymeric compositions, consisting of a polymer containing the HEMA unit and a photoacid generator, were insolubilized in an aqueous base developer on exposure to UV light and a successive baking process to provide a negative‐working photoresist. A series of poly(benzyl methacrylate‐co‐methacrylic acid‐co‐2‐hydroxyethyl methacrylate) terpolymers with various contents of HEMA were prepared to elucidate the photopolymeric characteristics. The polymer behavior in films was examined by a comparison of the photosensitivity and IR spectroscopic method. Experiments with a model compound were also carried out. On the basis of the results, we found that the resist was insolubilized by crosslinking through the transesterification of HEMA segments due to acid generated from the photoacid generator and subsequent heating. The advantage of using the 2‐hydroxyethyl group is that in the terpolymer, the HEMA unit is transparent at a short‐wavelength region and is a promising crosslinking unit for ArF lithographic photoresists. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1858–1867, 2002     

Solvothermal growth of ZnO

The growth of ZnO single crystals and crystalline films by solvothermal techniques is reviewed. Largest ZnO crystals of 3 inch in diameter are grown by a high-pressure medium-temperature hydrothermal process employing alkaline-metal mineralizer for solubility enhancement. Structural, thermal, optical and electrical properties, impurities and annealing effects as well as machining are discussed. Poly- and single-crystalline ZnO films are fabricated from aqueous and non-aqueous solutions on a variety of substrates like glass, (100) silicon, -Al₂O₃, Mg₂AlO₄, ScAlMgO₄, ZnO and even some plastics at temperatures as low as 50 °C and ambient air conditions. Film thickness from a few nanometers up to some tens of micrometers is achieved. Lateral epitaxial overgrowth of thick ZnO films on Mg₂AlO₄ from aqueous solution at 90 °C was recently developed. The best crystallinity with a full-width half-maximum from the (0002) reflection of 26 arcsec has been obtained by liquid phase epitaxy employing alkaline-metal chlorides as solvent. Doping behavior (Cu, Ga, In, Ge) and the formation of solid solutions with MgO and CdO are reported. Photoluminescence and radioluminescence are discussed.     

Influence of a high vertical magnetic field on Te dopant segregation in InSb grown by the vertical gradient freeze method

A vertical gradient freeze apparatus was set up to investigate the influence of a vertical magnetc field on Te dopant segregation in InSb. Te-doped InSb crystals were grown in the presence and absence of an 80.0 kG magnetic field. The axial profile of the Te concentration in the crystal grown in the magnetic field was observed to be more uniform than that grown without magnetic field, which was attributed to the influence of the high magnetic field on Te dopant segregation by reducing convection in the melt.     

Growth and Characterization of Na2CaGe6O14 Single Crystals

Transparent, crack-free Na₂CaGe₆O₁₄ (NCG) single crystals were successfully grown using the Czcchralski technique. The largest crystal had 30 mm in total length and 18 mm in maximal diameter. Best crystal quality was achieved under low temperature gradient arrangement. The crystal structure of NCG has been refined from single crystal X-ray diffraction data. Some piezoelectric properties of NCG are reported.     

Dynamic behaviors of molecular assemblies at liquid/liquid interfaces studied by time-resolved quasi-elastic laser scattering spectroscopy.

The dynamic behaviors of molecular assemblies at two immiscible liquid interfaces are intriguing topics in many fields of science and technology. However, it is generally difficult to investigate the dynamic behaviors of such molecular assemblies because of the buried nature of liquid/liquid interfaces. In the present paper, our recent investigations on dynamic behaviors of various molecular self-assemblies at liquid/liquid interfaces are reviewed. We monitored dynamic behaviors of the molecular assemblies by time-resolved quasi-elastic laser scattering (TR-QELS) and fluorescent spectroscopy. The former method allows us to monitor the change in interfacial tension with millisecond time-resolution. As molecular assemblies, bis(2-ethylhexyl)sulfosuccinate (AOT) microemulsion, phospholipid biomembrane models, and liposome-DNA complexes have all been studied, since they are relevant in material sciences and biological technologies. At liquid/liquid interfaces, these molecular assemblies showed characteristic behaviors. We review the finding of rebound response of the interfacial tension at the liquid/liquid interface induced by the adsorption of the AOT microemulsion. We monitored the hydrolysis reaction of phospholipid biomembrane models formed at oil/water interfaces, observing the different types of behavior of liposome-DNA complexes at biomembrane models with different kinds of phospholipids.