Synthesis of a novel star-shaped dendrimer by radial-growth polymerization of sarcosine N-carboxyanhydride initiated with poly(trimethyleneimine) dendrimer

A novel AB_n-type dendrimer/linear polymer block copolymer, i.e., poly(trimethyleneimine) dendrimer-block-(polysarcosine)₆₄ ( 1 ), was synthesized by ring-opening polymerization of sarcosine N-carboxyanhydride initiated with the 64-NH₂-terminal poly(trimethyleneimine) dendrimer as a macroinitiator. 1 has narrow molecular weight distributions (M_w/M_n = 1.0₁–1.0₃, by size exclusion chromatography) and controlled polysarcosine chain lengths (by varying the monomer/dendrimer feed molar ratios). Small-angle neutron scattering (SANS) data obtained in D₂O solution of 1 (DP's of polysarcosine = 2.0 and 24) fitted well with a Guinier plot of a spherical particle, and gave diameters of 44 and 100 Å, respectively.     

Structure-selective dye uptake into an aggregate of a copolymer with linear polyelectrolyte block and hydrophobic block carrying pendant dendritic moiety in water

Selective uptake of various dyes into an aggregate of amphiphilic copolymer consisting of a hydrophilic linear polyelectrolyte block and hydrophobic block carrying pendant dendritic moiety has been investigated in water. The copolymer associated into an aggregate with a hydrophobic interior at concentrations above 0.2 mg cm(-3). The uptake (23 and 36 molecules per aggregate, respectively) of pyrene and Oil Yellow in an aggregate was one order higher than that of benzo[a]pyrene and SudanIII. The hydrophobic dyes are always doped in the interior of the aggregate, but the difference in uptake among dyes may depend on their structure. Even if a large number of guest molecules was doped into the interior of an aggregate, the size of the sphere-like aggregate was conserved. It is suggested that guest molecules are encapsulated into the persisting cavity within and between hydrophobic dendron moieties in an aggregate. Structure-selective uptake reported in this investigation is a unique character of an aggregate of copolymer with dendron moiety because the dendron moiety offers a large void for doping.     

Interplay between nonlinearity,scan speed,damping, and electronics in frequency modulation atomic-force microscopy

Numerical simulations of the frequency modulation atomic force microscope, including the whole dynamical regulation by the electronics, show that the cantilever dynamics is conditionally stable and that there is a direct link between the frequency shift and the conservative tip-sample interaction. However, a soft coupling between the electronics and the nonlinearity of the interaction may significantly affect the damping. A resonance between the scan speed and the response time of the system can provide a simple explanation for the spatial shift and contrast inversion between topographical and damping images, and for the extreme sensitivity of the damping to a tip change.     

Single‐Line EPR Spectra from Radicals Encapsulated in Aggregates of Amphiphilic Block Copolymers with Hydrophobic Dendritic Pendants in Water

Summary: A water‐insoluble organic 1,1‐diphenyl‐2‐picrylhydrazyl (DPPH) radical is solubilized in aqueous solutions of aggregates of amphiphilic block copolymers with hydrophobic dendritic pendants. The number (100–200) of DPPH molecules solubilized in an aggregate, which is evaluated from UV‐visible absorption spectra, is in agreement with that of the DPPH radicals determined from electron paramagnetic resonance (EPR) spectroscopy. The DPPH radicals are stably solubilized without decomposition in the polymer aggregates. The radicals exhibit a single‐line EPR absorption, which is narrowed by the interspin interaction, and indicates the assembly formation of DPPH radicals in polymer aggregates. These results suggest the effective utilization of the DPPH radical as a spin‐probe indicator in aqueous solutions.

When DPPH is solubilized in aqueous solutions of NaAMPS‐b‐G2(n3), the polymer solutions become purple colored, which is characteristic of the DPPH radical.     

Electron microscopic and light scattering observation on a system with two iridescent phases

Electron microscopic observations and classical light-scattering measurements have been carried out for dodecyldimethylaminoxide/hexanol/water mixtures in the concentration range where iridescent colors occur. This system has two different iridescent phases. The iridescent phase with more hexanol forms quickly, and the phase with less hexanol forms very slowly. Three different isotropic phases which show strong flow birefringence are found near both iridescent phases. The electron microscopic pictures show clearly that only one of these isotropic phases with strong flow birefringence is a bicontinuous sponge phase (L_3h -phase). This is the phase which comes out by adding some alkanol to the upper lamellar phase. The flow birefringent phase below the lower lamellar phase forms unilamellar vesicles. The flow birefringent phase which occurs between both iridescent phases contains multilamellar vesicles and is shown to be a precursor of a lamellar phase.     

Surface plasmon fluorescence investigation of energy-transfer-controllable organic thin films

Thin functional organic films on a gold substrate were fabricated by adsorbing tetrakis(carboxyphenyl)porphyrin (TCPP) on a spacer layer, which was prepared by the layer-by-layer adsorption of a dendrimer and a linear polymer. The thickness and photoluminescence of the films were investigated by surface plasmon resonance and surface plasmon fluorescence techniques, respectively. TCPP adsorbed on the spacer layer in aqueous solutions of different ionic strengths resulted in a thick TCPP adlayer at high ionic strength and a shrunk spacer layer at low ionic strength. The fluorescence was quenched at high ionic strength but could be observed at low ionic strength. The effects are explained by the states of dye aggregation. This study shows the control of energy transfer from a metal surface to a dye layer by changing the dye adlayer. It can contribute to the development of molecular devices involving energy-transfer systems.     

Fluorescence emission from PAMAM and PPI dendrimers

A strong fluorescence emission from poly(amido amine) (PAMAM) dendrimers with different terminal groups or a poly(propylene imine) (PPI) dendrimer was studied under different conditions by varying experimental parameters such as pH value, aging time, temperature, and concentration. The increase of fluorescence intensity was fast at low pH or high temperature but linear with respect to dendrimer concentration. It was reasonable that the formation of a fluorescence-emitting moiety had a close relation to protonated tertiary amine groups in PAMAM or PPI dendrimers. Furthermore, oxidation of the tertiary amines was confirmed to play an important role, which was evidently caused by oxygen in air. The results of fluorescence decay indicated that the deactivation of luminescence was raised with increasing temperature. Dendrimers emitted blue photoluminescence along fiber chain templates on a fluorescent microscope.     

Morphological change of thermosensitive imidazolium‐based poly(ionic liquid)/poly(phenylethylmethacrylate) composite particles

Composite particles comprising poly(2‐phenylethyl methacrylate) (PPhEMA) and imidazolium‐based poly(ionic liquid)s were prepared by suspension polymerization of 1‐vinyl‐3‐ethylimidazolium bis(trifluoromethanesulfonyl)amide as an ionic liquid monomer with dissolved PPhEMA. Not only PPhEMA exhibits lower critical solution temperature (LCST) behavior in 1‐vinyl‐3‐ethylimidazolium bis(trifluoromethanesulfonyl)amide but also the polymer blend in the bulk state exhibited LCST behavior. However, the composite polymer particles obtained after polymerization at 70°C maintained a homogeneous inner structure after heat treatment as the polymerization temperature was greater than the LCST in this system due to the formation of a cross‐linked structure during polymerization. When the composite particles were prepared by suspension polymerization at 30°C, their inner morphology changed from homogeneous to phase separated during the subsequent heat treatment. Moreover, the morphology transformation of the composite particles was dependent on the PPhEMA molecular weight. Copyright © 2016 John Wiley & Sons, Ltd.     

Fabrication and self-assembly of hydrophobic gold nanorods

Hydrophobic gold nanorods were fabricated from hydrophilic gold nanorods coated with hexadecyltrimethylammonium bromide by treating with mercaptopropyltrimethoxysilane (MPS) and subsequently octadecyltrimethoxysilane (ODS). The fabrication of the hydrophobic shell went through the process of (1) binding MPS onto the nanorods, (2) hydrolysis of methoxysilanes, and (3) immobilization of ODS by dehydration condensation. The 2- or 3-D ordered structures of hydrophobic nanorods were self-assembled by the evaporation of solvent on a substrate. The aspects of 2-D assemblies were dependent on the concentration of the nanorods, as was seen in transmission electron microscopic images. At a low concentration, the nanorods assembled parallel to the substrate, whereas they stood on the substrate at a high concentration. On the other hand, in a solid of the gold nanorods, the formation of the 3-D assembly was confirmed by small-angle X-ray scattering. The assembly consisted of hexagonal arrays of the gold nanorods and their lamellar accumulation.     

Ag/ThioClickFerrophos-catalyzed enantioselective Mannich reaction and amination of glycine Schiff base

The AgOAc/ThioClickFerrophos complex catalyzed the asymmetric Mannich reaction of glycine Schiff base with N-tosylimines effectively to give a mixture of syn and anti adducts (syn/anti = 60/40-70/30) at high yields with high enantioselectivities (up to 98% ee). The complex also catalyzed the asymmetric amination of glycine Schiff base with di-tert-butyl azodicarboxylate with high enantioselectivity.