Thermal Conductivity of poly-p-phenylene-2,6-benzobisoxazole Film along the In-Plane Axis in the 10–300 K Temperature Range

The thermal conductivities of compression molded thin films of poly-p-phenylene-2,6-benzobisoxazole (PBO) were measured in directions along an in-plane axis in the 10–300?K temperature range by a steady-state heat flow method, with interest in the use of the material for superconductivity applications. The thermal conductivities of the PBO films increased from 0.3?W/mK to 9.0?W/mK with increasing temperature from 10?K to 300?K and these were much higher than those of polyimide films, epoxy resin and glass fiber reinforced plastics at all temperatures. The 9.0?W/mK at 300?K was 60% of that of stainless steel (SUS304). It was 6?W/mK at 150?K, which was half that of SUS304 and was 3.3?W/mK at 77?K, which was 33% of that of SUS304. The thermal conductivities of the PBO films were lower than those of a cloth of high strength ultrahigh molecular weight polyethylene fiber reinforced plastics in the 30?K–180?K temperature range and were almost equivalent to its values in the 180?K–300?K temperature range. The main contribution to the thermal conduction in the PBO films was from thermal phonon conduction along the molecular chains. Although many kinds of high thermal conductivity polymeric materials have been prepared by a uni-directional drawing process or by adding high thermal conductive additives, the PBO film showed high thermal conductivity without a uni-directional drawing process or high thermal conductive additive.     

Comparative study on the structural, optical, and electrochemical properties of bithiophene-fused benzo[c]phospholes

Three types of bithiophene-fused benzo[c]phospholes were successfully prepared by Ti(II)-mediated cyclization of the corresponding dialkynylated bithiophene derivatives as a key step. Each sigma(3)-phosphorus center of the benzo[c]phosphole subunits was readily transformed into sigma(4)-phosphorus center by Au coordination or oxygenation. In addition, the bithiophene subunit was functionalized at the alpha,alpha'-carbon atoms by Pd-catalyzed cross-coupling reactions with heteroarylmetals and by an S(N)Ar reaction with hexafluorobenzene. The experimentally observed results (NMR spectroscopy, X-ray analysis, UV/Vis absorption/fluorescence spectroscopy, and cyclic/differential-pulse voltammetry) have revealed that the structural, optical, and electrochemical properties of the bithiophene-fused benzo[c]phospholes vary considerably depending on the pi-conjugation modes at the bithiophene subunits and the substituents of the heterocyclopentadiene components. The appropriately ring-annulated sigma(3)-P derivatives and sigma(4)-P-AuCl complexes were found to emit fluorescence in the orange-red region, and the sigma(4)-P-oxo derivatives proved to undergo reversible one-electron reduction at -1.4 to -1.8 V (vs ferrocene/ferrocenium). These results indicate that the bithiophene-fused benzo[c]phospholes possess narrow HOMO-LUMO gaps and low-lying LUMOs, which was confirmed by density functional theory calculations of their model compounds. The time-of-flight measurement of an ITO/benzo[c]phosphole/Al device showed that the electron mobility in the P-oxo derivative is one-order higher than that in Alq(3) at low electric fields. The present study demonstrates that the arene-fused benzo[c]phosphole skeleton could be a highly promising platform for the construction of a new class of phosphole-based optoelectrochemical materials.     

Syntheses, structures, and coordination chemistry of phosphole-containing hybrid calixphyrins: promising macrocyclic P,N2,X-mixed donor ligands for designing reactive transition-metal complexes

The syntheses, structures, and coordination chemistry of phosphole-containing hybrid calixphyrins (P,N2,X-hybrid calixphyrins) and the catalytic activities of their transition-metal complexes are reported. The 5,10-porphodimethene type 14pi-P,(NH)2,X- and 16pi-P,N2,X-hybrid calixphyrins (X = O, S, NH) are prepared via acid-promoted dehydrative condensation between a sigma4-phosphatripyrrane and the corresponding 2,5-bis[hydroxy(phenyl)methyl]heteroles followed by DDQ oxidation. Both spectroscopic and crystallographic data of the hybrid calixphyrins have revealed that the conformation and size of the macrocyclic platforms as well as the oxidation state of the -conjugated pyrrole-heterole-pyrrole (N-X-N) units vary considerably depending on the combination of heteroles. The sigma3-P,(NH)2,S- and sigma3-P,N2,S-hybrids react with Pd(OAc)2 and Pd(dba)2, respectively, to afford the same Pd(II)-P,N2,S-hybrid complex, in which the calixphyrin platform is regarded as a dianionic ligand. In the complexation with [RhCl(CO)2]2 in dichloromethane, the sigma3-P,N2,S-hybrid behaves as a neutral ligand to afford an ionic Rh(I)-P,N2,S-hybrid complex, whereas the sigma3-P,N2,NH-hybrid behaves as an anionic ligand to produce Rh(III)-P,N3-hybrid complexes. In the latter reaction, it is likely that a neutral Rh(I)-P,N3-hybrid complex, generated as a highly nucleophilic intermediate, undergoes C-Cl bond activation of the solvent. The complexation of AuCl(SMe2) with the sigma3-P,N2,X-hybrids (X = S, NH) leads to the formation of the corresponding Au(I)-monophosphine complexes. The spectral data and crystal structures of these metal complexes exhibit the hemilabile nature of the phosphole-containing hybrid calixphyrin platforms derived from the flexible phosphole unit and the redox active N-X-N units. The hybrid calixphyrin-palladium and -rhodium complexes catalyze the Heck reaction and hydrosilylations, respectively, implying that the metal center in the core is capable of activating the substrates under appropriate reaction conditions. The present results demonstrate the potential utility of the phosphole-containing hybrid calixphyrins as a new class of macrocyclic P,N2,X-mixed donor ligands for designing highly reactive transition-metal complexes.     

A Novel Composite Poly-p-Phenylenebenzobisoxazole (PBO) Fiber Including Molecularly-Dispersed Copper Phthalocyanine in the Structure

The possibility to make a composite poly-p-phenylenebenzobisoxazole (PBO) fiber including a second component without distorting its original structures and mechanical properties was examined. Copper phthalocyanine was found to fulfill the above-mentioned condition and can be dispersed in the fiber molecularly. It was shown that part of the embedded copper phthalocyanine can be aligned one-dimensionally with periodicity along the fiber axis in the fiber. The color of the resultant fiber was dark blue, which is different from the original fiber having its yellowish golden color. According to X-ray diffraction analysis the preferential orientation of the a-axis of the PBO crystal was slightly more oriented by the addition of copper pthalocyanine than that of the pure PBO fiber, but the crystal size of PBO wasn't also affected. We thus show the possibility of adding a second material that can add additional properties to the fiber, but keeping the original high mechanical properties and oriented structures.     

Excess Heat Capacity in Yttria Stabilized Zirconia

The heat capacity of 9.70 and 11.35 mol% yttria stabilized zirconia ((ZrO₂)_1–x(Y₂O₃)_x; x=0.0970, 0.1135) was measured by adiabatic calorimetry between 13 and 300 K, and some thermodynamic functions were calculated and given in a table. A large excess heat capacity extending from the lowest temperature to room temperature with a broad maximum at about 75 K was found in comparison with the heat capacity calculated from those of pure zirconia and yttria on the basis of simple additivity rule. The shape of the excess heat capacity is very similar to the Schottky anomaly, which may be attributed to a softening of lattice vibration. The amount of the excess heat capacity decreased with increasing yttria doping, while the maximum temperature did not vary. The relationships among the excess heat capacity, defect structure and interatomic force constants, and also the role of oxygen vacancy were discussed.This revised version was published online in November 2005 with corrections to the Cover Date.     

Application of calorimetry and thermodynamics to critical problems in materials science

Calorimetry and thermodynamic studies have long been playing a very important role in the research fields of fundamental science and technology. Some topics and examples of thermodynamics studies are given, and the details are explained on the basis of the present author’s experience, focusing attention to application of adiabatic calorimetry and thermodynamics to solve critical problems in materials science: (1) condensed gas calorimetry and third law entropy, (2) phase transition and polymorphism in simple molecular crystals, (3) incommensurate phase transitions, (4) particle size effects on the phase transitions in ferroelectric/ferroelastic crystals, (5) relaxor ferroelectrics and multi-ferroics, and some other topics in materials science and technology.     

Biocleavable polyrotaxane-plasmid DNA polyplex for enhanced gene delivery

A biocleavable polyrotaxane, having a necklace-like structure consisting of many cationic alpha-cyclodextrins (alpha-CDs) and a disulfide-introduced poly(ethylene glycol) (PEG), was synthesized and examined as a nonviral gene carrier. The polyrotaxane formed a stable polyplex having positively charged surface even at low charge ratio. This is likely to be due to structural factors of the polyrotaxane, such as the mobile motion of alpha-CDs in the necklace-like structure. Rapid endosomal escape was observed 90 min after transfection. The positively charged surface and the good buffering capacity are advantageous to show the proton sponge effect. The pDNA decondensation occurred through disulfide cleavage of the polyrotaxane and subsequent supramolecular dissociation of the noncovalent linkages between alpha-CDs and PEG. Transfection of the DMAE-SS-PRX polyplex is independent of the amount of free polycation. Those properties played a key role for delivery of pDNA clusters to the nucleus. Therefore, the polyplex nature and the supramolecular dissociation of the polyrotaxane contributed to the enhanced gene delivery.     

O-N intramolecular alkoxycarbonyl migration of typical protective groups in hydroxyamino acids

O-N Intramolecular alkoxycarbonyl (carbonate-carbamate) migration was found to occur as a common reaction of hydroxyamino acids under mild basic aqueous conditions with no formation of side products. Carbonate protective groups migrate to produce amino-protected carbamate derivatives of hydroxyamino acids with high efficiency and purity.     

Label-free detection of C-reactive protein using reflectometric interference spectroscopy-based sensing system

Reflectometric interference spectroscopy (RIfS) is a label-free, time-resolved technique, and suitable for detecting antibody–antigen interaction. This work describes a continuous flow biosensor for C-reactive protein (CRP), involving an effective immobilization method of a monoclonal antibody against CRP (anti-CRP) to achieve highly sensitive RIfS-based detection of CRP. The silicon nitride-coated silicon chip (SiN chip) for the RIfS sensing was first treated with trimethylsilylchloride (TMS), followed by UV-light irradiation to in situ generation of homogeneous silanols on the surface. Following amination by 3-aminopropyltriethoxysilane, carboxymethyldextran (CMD) was grafted, and subsequently, protein A was immobilized to create the oriented anti-CRP surface. The immobilization process of protein A and anti-CRP was monitored with the RIfS system by consecutive injections of an amine coupling reagent, protein A and anti-CRP, respectively, to confirm the progress of each step in real time. The sensitivity was enhanced when all of the processes were adopted, suggesting that the oriented immobilization of anti-CRP via protein A that was coupled with the grafted CMD on the aminated surface of TMS-treated SiN chip. The feasibility of the present sensing system was demonstrated on the detection of CRP, where the silicon-based inexpensive chips and the simple optical setup were employed. It can be applied to other target molecules in various fields of life science as a substitute of surface plasmon resonance-based expensive sensors.     

Oxide-ion conductivity of (Ba1−xLax)2In2O5+x system based on brownmillerite structure

(Ba_1−xLa_x)₂In₂O_5+x, whose end member is Ba₂In₂O₅, is an oxygen-deficient perovskite oxide showing high oxide-ion conductivity. In order to clarify the reason why the high oxide ion conductivity appeared in this system, the electrical conductivity was measured as a function of temperature and La content. With an increasing La content, the discontinuous jump of ion conductivity in the Arrhenius plot, which is related to the disordering of the oxygen vacancies, disappeared for the sample with x0.2. Above x=0.12, the ion conductivity linearly increased with La content, while the activation energy remained constant with respect to the La content. Moreover, the conductivity for x=0.6 was 0.042 (S/cm) at 1073 K, which exceeded that of 8 mol% yttria-stabilized zirconia. The higher oxide-ion conductivity of this system could be dominated by the amount of mobile oxygen ions.