Specific heat on Sr<Subscript>2</Subscript>Nb<Subscript>2</Subscript>O<Subscript>7</Subscript> and Sr<Subscript>2</Subscript>Ta<Subscript>2</Subscript>O<Subscript>7</Subscript>

Summary Specific heats on the single crystals of Sr₂Nb₂O₇, Sr₂Ta₂O₇ and (Sr_1-xBa_x)₂Nb₂O₇ were measured in a wide temperature range of 2-600 K. Heat anomalies of a λ-type were observed at the incommensurate phase transition of T_INC (=495 K) on Sr₂Nb₂O₇ and at the super-lattice phase transition of T_SL (=443 K) on Sr₂Ta₂O₇; the transition enthalpies and the transition entropies were estimated. Furthermore, a small heat anomaly was observed at the low temperature ferroelectric phase transition of T_LOW (=95 K) on Sr₂Nb₂O₇. The transition temperature T_LOW decreases with increasing Ba content x and it vanishes for samples of x>2%.     

Gas chromatography of manganese(II) and manganese(III) trifluoroacetylacetonates by the ligand vapour technique

The thermal properties and gas Chromatographie behaviour of manganese(II) and manganese(III) trifluoroacetylacetonates (TFA) were investigated by using the ligand vapour technique. The two chelates, Mn(TFA); and Mn(TFA)₃, can be quantitatively eluted on a mixed-liquid phase (1.9% OV-17 ÷ 0.1% PEG-20M) at column temperatures above 210°C and 130–150°C, respectively; Mn(TFA)₃ is completely converted to Mn(TFA)₂ by thermal dissociation at column temperatures above 180°C and completely eluted as Mn(TFA)₂ above 210°C. The chelates can be determined separately within errors of about 1% after a preliminary extraction.     

Synthesis of a biodegradable polymeric supramolecular assembly for drug delivery

A novel design of a biodegradable carrier for drug delivery was established by constructing a supramolecular assembly of drugs and polymer backbones without any covalent bonds. A biodegradable polyrotaxane was synthesized in which α-cyclodextrins (α-CDs) as drug carriers were threaded onto poly(ethylene glycol) chains which then were capped at each chain end by L -phenylalanine via peptide linkages. The release of α-CDs was observed only when the terminal peptide linkages were degraded.     

常温下从离子液体电解液中电沉积金属钴

研究了离子液体镀液中Co、Zn的共沉积行为。ZnCl2-EMIC -CoCl2电解液的循环伏安曲线上出现了三个电流峰,对应的电极电位分别为250mV、50mV、-200mV（vs. Zn2+/Zn）。结合EDS成分分析,可断定这三个电流峰分别对应着Co的电沉积、Co电极上Zn的欠电位沉积和Co-Zn合金的电沉积。恒电位沉积表明,当控制阴极电位在100 mV（vs. Zn2+/Zn）左右时,可得到高纯度的钴镀层;若进行恒电流沉积,则当电流密度为85mA/cm2左右时能够得到高纯度的钴镀层。对Co、Zn的共沉积机理研究表明,Co的电沉积过程和Zn 在Co上的欠电位沉积过程均受扩散过程控制。     

Time-oscillating Lyapunov modes and the momentum autocorrelation function

The Lyapunov vectors corresponding to the steps of Lyapunov spectra for many-particle systems show time-oscillating behavior in two types of Lyapunov modes, one associated with time-translational invariance and the other with spatial translational invariance. Our result is that, for each coordinate direction, the longest period of the Lyapunov modes is twice as long as the period of the momentum autocorrelation function. A simple explanation for this relation is proposed and we argue that this result is generally true for many-particle systems. This gives the first quantitative connection between the Lyapunov modes and an experimentally accessible quantity.     

Stress distribution in poly‐p‐phenylenebenzobisoxazole (PBO) fiber estimated from vibrational spectroscopic measurement under tension. II. Analysis of inhomogeneous stress distribution in PBO fiber

Fourier transform Raman spectra were measured for poly‐p‐phenylenebenzobisoxazole (PBO) fiber subjected to a tensile stress, and the Raman shift factor (the frequency shift caused by 1 GPa tensile stress) depended strongly on the sample‐preparation condition. To clarify the reasons of this dependency, a mechanical series parallel model was adopted that could successfully and quantitatively explain the observed Raman shift factors and gave a concreate heterogeneous stress distribution in the PBO fibers. As a result, a mechanical series model was reasonable for PBO fiber. Broadening of Raman bands, which was observed when the PBO fiber was tensioned, could also be interpreted on the basis of an idea of heterogeneous stress distribution. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1281–1287, 2002     

Thermal Conductivity of poly-p-phenylene-2,6-benzobisoxazole Film along the In-Plane Axis in the 10–300 K Temperature Range

The thermal conductivities of compression molded thin films of poly-p-phenylene-2,6-benzobisoxazole (PBO) were measured in directions along an in-plane axis in the 10–300?K temperature range by a steady-state heat flow method, with interest in the use of the material for superconductivity applications. The thermal conductivities of the PBO films increased from 0.3?W/mK to 9.0?W/mK with increasing temperature from 10?K to 300?K and these were much higher than those of polyimide films, epoxy resin and glass fiber reinforced plastics at all temperatures. The 9.0?W/mK at 300?K was 60% of that of stainless steel (SUS304). It was 6?W/mK at 150?K, which was half that of SUS304 and was 3.3?W/mK at 77?K, which was 33% of that of SUS304. The thermal conductivities of the PBO films were lower than those of a cloth of high strength ultrahigh molecular weight polyethylene fiber reinforced plastics in the 30?K–180?K temperature range and were almost equivalent to its values in the 180?K–300?K temperature range. The main contribution to the thermal conduction in the PBO films was from thermal phonon conduction along the molecular chains. Although many kinds of high thermal conductivity polymeric materials have been prepared by a uni-directional drawing process or by adding high thermal conductive additives, the PBO film showed high thermal conductivity without a uni-directional drawing process or high thermal conductive additive.