Emulsifier-free emulsion polymerization of tetrafluoroethylene by radiation. III. Simultaneous formation of hydrofluoric acid

Simultaneous formation of hydrofluoric acid (HF) in the radiation-induced polymerization of tetrafluoroethylene (TFE) was investigated. HF concentration in PTFE latex was determined mainly by conductometric titration with 0.01 and 0.001N NaOH. The amount of HF formed is almost independent of agitation speed and the amount of n-hexadecane added and is maximal at ca. 70°C corresponding to the rate of polymerization. The rate of HF formation increases with the initial pressure of TFE monomer and dose rate and decreases with polymerization or TFE consumption. This fact suggests that HF is formed mainly by TFE reactions and not by the degradation of PTFE. The mechanism of HF formation in this reaction system in the absence of oxygen is shown in the following two schemes: scheme I is the reaction of TFE with primary radicals (OH·, H·, e) from the radiolysis of water; scheme II is the reaction of water with the species from the radiolysis of TFE. On the assumption that HF is formed only according to scheme I, the G value of HF formation G(HF)_calc can be calculated as 11.25. All observed G values G(HF)_obs are larger than G(HF)_calc. When the polymerization is carried out at 20 kg/cm² under various dose rates, G(HF)_obs increases with the dose rate. When the polymerization is carried out at 3.0 × 10⁴ rad/hr under various pressures, G(HF)_obs decreases with the decrease in pressure from 20 to 2 kg/cm² and is fairly close to G(HG)_calc at 2 kg/cm². This indicates that HF formation is due mainly to scheme II at high pressure (in the presence of enough TFE) and to scheme I as the pressure is lowered.     

Synthesis of polydithiourethanes and their thermal,optical, and mechanical properties originated from monomers structure

Polyaddition of various diisothiocyanates and dithiols was achieved with triethylamine in dimethylformamide at 25 °C for 12 h under nitrogen, and then the corresponding polydithiourethanes (PDTUs) were obtained with high yield and molecular weight without depending on the monomer structures, although the dithiol monomer of the low nucleophilicity was unsuitable for polyaddition in this system. The chemical and physical properties of the obtained PDTUs such as solvent solubility, glass transition temperature, thermal stability, transparency, refractive index, and tensile strength, were analyzed in detail by gel permeation chromatography, nuclear magnetic resonance, Fourier transform infrared–attenuated total reflection, ultraviolet–visible, differential scanning calorimetry, thermogravimetric analysis, and tensile testing measurements. These results proved that PDTUs and their cast films having the aliphatic diisothiocyanate and dithiol moieties exhibited excellent chemical and physical properties compared to that of the aromatic PDTUs. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2255–2262     

Structural confirmation of oligosaccharides newly isolated from sugar beet molasses

ABSTRACT: BACKGROUND: Sugar beet molasses is a viscous by-product of the processing of sugar beets into sugar. The molasses is known to contain sucrose and raffinose, a typical trisaccharide, with a well-established structure. Although sugar beet molasses contains various other oligosaccharides as well, the structures of those oligosaccharides have not been examined in detail. The purpose of this study was isolation and structural confirmation of these other oligosaccharides found in sugar beet molasses. RESULTS: Four oligosaccharides were newly isolated from sugar beet molasses using high-performance liquid chromatography (HPLC) and carbon-Celite column chromatography. Structural confirmation of the saccharides was provided by methylation analysis, matrix-assisted laser desorption/ionaization time of flight mass spectrometry (MALDI-TOF-MS), and nuclear magnetic resonance (NMR) measurements. CONCLUSION: The following oligosaccharides were identified in sugar beet molasses: beta-D-galactopyranosyl-(1- > 6)-beta-D-fructofuranosyl-(2 <-> 1)-alpha-D-glucopyranoside (named beta-planteose), alpha-D-galactopyranosyl-(1- > 1)-beta-D-fructofuranosyl-(2 <-> 1)-alpha-D-glucopyranoside (named1-planteose), alpha-D-glucopyranosyl-(1- > 6)-alpha-D-glucopyranosyl-(1 <-> 2)-beta-D-fructofuranoside (theanderose), and beta-D-glucopyranosyl-(1- > 3)-alpha-D-glucopyranosyl-(1 <-> 2)-beta-D-fructofuranoside (laminaribiofructose). 1-planteose and laminaribiofructose were isolated from natural sources for the first time.     

Construction of an asymmetric quaternary carbon via an asymmetric aza-Claisen rearrangement and its application in the total synthesis of (+)-α-cuparenone

Excess lithium hexamethyldisilazide (LHMDS) with LiCl prompted the asymmetric aza-Claisen rearrangement of carboxamide and retarded the decomposition of its amide enolate. The addition of these two reagents was a key step that led to the total synthesis of (+)-α-cuparenone with a stereogenic quaternary center.     

Determination of l‐tryptophan and l‐kynurenine derivatized with (R)‐4‐(3‐isothiocyanatopyrrolidin‐1‐yl)‐7‐(N,N‐dimethylaminosulfonyl)‐2,1,3‐benzoxadiazole by LC‐MS/MS on a triazole‐bonded column and their quantification in human serum

The concentrations of l ‐tryptophan (Trp) and the metabolite l ‐kynurenine (KYN) can be used to evaluate the in‐vivo activity of indoleamine 2,3‐dioxygenase (IDO) and tryptophan 2,3‐dioxygenase (TDO). As such, a novel method involving derivatization of l ‐Trp and l ‐KYN with (R)‐4‐(3‐isothiocyanatopyrrolidin‐1‐yl)‐7‐(N,N‐dimethylaminosulfonyl)‐2,1,3‐benzoxadiazole (DBD‐PyNCS) and separation by high‐performance liquid chromatography (HPLC) with tandem mass spectrometric (MS/MS) detection on a triazole‐bonded column (Cosmosil HILIC®) was developed to determine their concentrations. The optimized mobile phase, CH₃CN/10 mm ammonium formate in H₂O (pH 5.0) (90:10, v/v) eluted isocratically, resulted in satisfactory separation and MS/MS detection of the analytes. The detection limits of l ‐Trp and l ‐KYN were approximately 50 and 4.0 pm , respectively. The column temperature affected the retention behaviour of the Trp and KYN derivatives, with increased column temperatures leading to increased capacity factors; positive enthalpy changes were revealed by van't Hoff plot analyses. Using the proposed LC‐MS/MS method, l ‐Trp and l ‐KYN were successfully determined in 10 μL human serum using 1‐methyl‐l ‐Trp as an internal standard. The precision and recovery of l ‐Trp were in the ranges 2.85–9.29 and 95.8–113%, respectively, while those of l ‐KYN were 2.51–16.0 and 80.8–98.2%, respectively. The proposed LC‐MS/MS method will be useful for evaluating the in vivo activity of IDO or TDO. Copyright © 2016 John Wiley & Sons, Ltd.     

Multipod structures of lamellae‐forming diblock copolymers in three‐dimensional confinement spaces: Experimental observation and computer simulation

The three‐dimensional (3D) confinement effect on the microphase‐separated structure of a diblock copolymer was investigated both experimentally and computationally. Block copolymer nanoparticles were prepared by adding a poor solvent into a block copolymer solution and subsequently evaporating the good solvent. The 3D structures of the nanoparticles were quantitatively determined with transmission electron microtomography (TEMT). TEMT observations revealed that various complex structures, including tennis‐ball, mushroom‐like, and multipod structures, were formed in the 3D confinement. Detailed structural analysis, showed that one block of the diblock copolymer slightly prefers to segregate into the particle surface compared with the other block. The observed structures were further elaborated using cell dynamics computer simulation. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1702–1709     

Synthesis of green organogelators with a sulfide linkage via solvent-free Michael addition: soft templates for the preparation of size-controlled gold nanoparticles

Green organogelators with a sulfide linkage and free amino groups were synthesized via phase transfer catalysis using a N-benzylcinchonidinium bromide catalyst. Their self-assemblies in various common solvents were examined. These compounds exhibit high gelation ability especially in aromatic and highly polar solvents with a low critical gelation of 0.1 wt %. The organogels were analyzed by ¹H nuclear magnetic resonance (¹H NMR) and Fourier transfer-infrared spectroscopies (FT-IR), and their phase transition temperatures were determined by differential scanning calorimetry. The homogeneity of the gel networks was examined by field emission scanning electron microscopy and transmission electron microscopy (TEM). A lamellar structure was also confirmed by X-ray diffraction analysis. The organogels were employed as soft-templates for the in situ generation of stable gold nanoparticles dispersed in the gel matrix, and the resulting GNP dispersions were studied by ¹H NMR and UV–vis absorption. Transmission electron microscopy showed that GNPs assemble into a thin membrane-like structure.